journal article·2021-03

Tailoring the CdS/CdSe/CdTe multilayer structure for optimization of photovoltaic device performance guided by mapping spectroscopic ellipsometry

Mohammed A. Razooqi Alaani, Prakash Koirala, Puja Pradhan, Adam B. Phillips, Nikolas J. Podraza, Michael J. Heben, Robert W. Collins

Publisher page

Abstract

Abstract Thin film CdTe superstrate solar cells have been fabricated by sputtering starting from CdS/CdSe front layers deposited on transparent conductor coated glass. The performance of such devices is sensitive to the fabrication details including the temperature-time profile, which leads to CdSe/CdTe interdiffusion and formation of a CdTe1-xSex bandgap-graded absorber. Mapping spectroscopic ellipsometry (M-SE) has been applied to the CdS and CdSe thin films for process calibration, which involves determining the deposition rate in terms of effective thickness (volume/area) versus spatial position on the sample. The goal is to optimize the performance of the devices by correlating cell parameters with these two effective thicknesses. Intended variations in the thicknesses along with unintended spatial non-uniformities enable coarse and fine-scale optimization, respectively. Using these methods, the highest performance solar cells from the CdS/CdSe/CdTe structure are obtained with 13 nm CdS and 100 nm CdSe. An increase in the CdS thickness above 13 nm leads to a decrease in open-circuit voltage and fill-factor attributed to the formation of a CdSe1-zSz interdiffusion region with z approaching 0.5, where the alloy electronic properties are likely to suffer. Our results demonstrate that M-SE, exploited in conjunction with deposition non-uniformities, serve as a viable approach for process optimization of complex solar cell structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Interdiffusion in polycrystalline thin‐film CdTe/CdS solar cells10.1063/1.49426 ↗
2. Thin-film cadmium sulfide/cadmium telluride alloys10.1557/PROC-426-325 ↗
3. Recrystallization and sulfur diffusion in CdCl2-treated CdTe/CdS thin films10.1002/(SICI)1099-159X(199707/08)5:4<249::AID-PIP178>3.0.CO;2-S ↗
4. Interface reactions in CdTe solar cell processing10.1557/PROC-485-215 ↗
5. Evidence for grain-boundary-assisted diffusion of sulfur in polycrystalline CdS/CdTe heterojunctions10.1063/1.125369 ↗
6. Characterisation of CdS∣CdTe heterojunctions by photocurrent spectroscopy and electrolyte electroreflectance/absorbance spectroscopy (EEA/EER)10.1016/S0022-0728(02)00730-1 ↗
7. Optical energy gap of the mixed crystal CdSxTe1-x10.1143/JJAP.12.1641 ↗
8. Optical properties of CdTe1−xSx (0⩽x⩽1): experiment and modeling10.1063/1.369372 ↗
9. A review of the optical band gap of thin film CdSxTe1−x10.1016/j.solmat.2005.07.003 ↗
10. First-principles calculation of band offsets, optical bowings, and defects in CdS, CdSe, CdTe, and their alloys10.1063/1.372014 ↗
11. Mass spectrometric study of the phase boundaries of the CdS-CdTe system10.1149/1.2086641 ↗
12. Phase behavior in the CdTe–CdS pseudobinary system10.1116/1.1487872 ↗
13. Real time spectroscopic ellipsometry of sputtered CdTe, CdS, and CdTe1−xSx thin films for photovoltaic applications10.1002/pssa.200777892 ↗
14. Enhancing the photo-currents of CdTe thin-film solar cells in both short and long wavelength regions10.1063/1.4901532 ↗
15. Current enhancement of CdTe-based solar cells10.1109/JPHOTOV.2015.2458040 ↗
16. Structural and compositional dependence of the CdTexSe1−x alloy layer photoactivity in CdTe-based solar cells10.1038/ncomms12537 ↗
17. The study of CdSe thin film prepared by pulsed laser deposition for CdSe/CdTe solar cell10.1007/s10854-016-4689-9 ↗
18. Incorporation of CdSe layers into CdTe thin film solar cells10.1016/j.solmat.2018.03.010 ↗
19. First-principles study of the bandgap tuning and doping control in CdSexTe1−x alloy for high efficiency solar cell10.1088/1674-1056/28/8/086106 ↗
20. Thin-film solar cells with 19% efficiency by thermal evaporation of CdSe and CdTe10.1021/acsenergylett.9b02836 ↗
21. Optical properties of CdSe1-xSx and CdSe1-yTey alloys and their application for CdTe photovoltaics
22. A versatile optical model applied to CdTe and CdSe1–yTey alloys: sensitivity to film composition and relative defect density
23. Band-gap engineering in Cu(In,Ga)Se2 thin films grown from (In,Ga)2Se3 precursors10.1016/0927-0248(95)00122-0 ↗
24. Cadmium telluride solar cells
25. New results on the development of a thin-film p-CdTe-n-CdS heterojunction solar cell
26. Efficient thin-film CdS/CdTe solar cells
27. Thin‐film CdS/CdTe solar cell with 15.8% efficiency10.1063/1.109629 ↗
28. 16.5% efficient CdS/CdTe polycrystalline thin film solar cell
29. Progress and challenges with CdTe cell efficiency
30. Preparation and characterization of pulsed laser deposited CdS/CdSe bi-layer films for CdTe solar cell application10.1016/j.mssp.2016.03.009 ↗
31. Preparation and characterization of pulsed laser deposited a novel CdS/CdSe composite window layer for CdTe thin film solar cell10.1016/j.apsusc.2016.01.224 ↗
32. Rapid thermal annealing on ZnMgO window layer for improved performance of CdTe solar cells10.1016/j.solmat.2018.06.033 ↗
33. Structural and electronic properties of CdTe1-xSex films and their application in solar cells10.1080/14686996.2018.1497403 ↗
34. Application of mapping spectroscopic ellipsometry for CdSe/CdTe solar cells: optimization of low-temperature processed devices with all-sputtered semiconductors
35. Mapping spectroscopic ellipsometry of CdTe solar cells for property-performance correlations
36. Real time and mapping spectroscopic ellipsometry for CdTe photovoltaics
37. Optical mapping of large area thin film solar cells
38. Assessment of effective-medium theories in the analysis of nucleation and microscopic surface roughness evolution for semiconductor thin films10.1103/PhysRevB.61.10832 ↗
39. What is an air mass 1.5 spectrum? (solar cell performance calculations)
40. Optical physics of materials
41. Optical properties of cubic and hexagonal CdSe10.1063/1.359815 ↗
42. Columnar growth in thin films10.1103/PhysRevLett.60.424 ↗
43. Model for the amorphous roughening transition in amorphous semiconductor deposition10.1016/j.jnoncrysol.2005.12.013 ↗
44. Experimental and theoretical study of the evolution of surface roughness in amorphous silicon films grown by low-temperature plasma-enhanced chemical vapor deposition10.1103/PhysRevB.80.085403 ↗
45. Pressure dependence of the fundamental band-gap energy of CdSe10.1063/1.1638879 ↗
46. Elastic, electronic, and lattice dynamical properties of CdS, CdSe, and CdTe10.1016/j.physb.2005.11.099 ↗
47. Optical transition energies as a probe of stress in polycrystalline CdTe thin films
48. Kasap · 2006 · 134
49. Parametric optical property database for CdSe1−xSx alloys10.1007/s13391-019-00144-9 ↗
50. Induced recrystallization of CdTe thin films deposited by close-spaced sublimation10.1063/1.57998 ↗
51. Investigation of induced recrystallization and stress in close-spaced sublimated and radio-frequency magnetron sputtered CdTe thin films10.1116/1.581892 ↗
52. A study of the optical bandgap energy and Urbach tail of spray-deposited CdS:In thin films10.1016/j.jmrt.2013.02.012 ↗
53. Comparison between the effects of CdCl2 heat treatment on CdTe films prepared by RF magnetron sputtering and close spaced sublimation methods10.1007/s10854-013-1121-6 ↗
54. Correlations between mapping spectroscopic ellipsometry and solar cell performance for the study of nonuniformities in thin (0.7 μm) Cu(In1−xGax)Se2 solar cells over large areas
55. Large-area compositional mapping of Cu(In1-xGax)Se2 materials and devices with spectroscopic ellipsometry10.1109/JPHOTOV.2012.2216513 ↗