journal article·2019-08

Realization of highly conductive and transparent GaZnO/InCdO/GaZnO films for the enhancement of solar cell efficiency

Ngoc Minh Le, Jae-Cheol Park, Jinhyeok Kim, Byung-Teak Lee

Publisher page

Abstract

In 0.024Cd 0.976 O thin films were inserted between two layers of Ga 0.04Zn 0.96 O films, in an effort to improve the electrical properties of the oxide film. The multilayer structure with an optimum InCdO layer thickness of ∼30 nm showed significantly improved electrical properties without seriously deteriorating the optical properties, with an average optical transmittance of ∼90% over the visible and the NIR range and a resistivity of 7.5 × 10 −5 Ω cm. It was also observed that efficiency of the CuInGaSe solar cell devices using the Ga 0.04Zn 0.96O (50 nm)/In 0.024Cd 0.976O (30 nm)/Ga 0.04Zn 0.96O (50 nm) structure as the front electrode shows much higher efficiency (8.5%) than that (4.7%) of the devices with 100 nm Ga 0.04Zn 0.96 O front electrode. This result indicates that the proposed multilayer structure would be a strong candidate for the transparent conducting electrode for the high performance optoelectronic devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Copper-based nanomaterials and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. An indium free anode for large area flexible OLEDs: defect free transparent conductive zinc tin oxide10.1002/adfm.201503753 ↗
2. Highly robust transparent and conductive gas diffusion barriers based on tin oxide10.1002/adma.201502973 ↗
3. Shape controlled plasmonic Sn doped CdO colloidal nanocrystals: a synthetic route to maximize the figure of merit of transparent conducting oxide10.1002/smll.201602469 ↗
4. Past achievements and future challenges in the development of optically transparent electrodes10.1038/nphoton.2012.282 ↗
5. Green · 1992
6. Improving solar cell efficiency with optically optimised TCO layers10.1016/j.solmat.2012.01.037 ↗
7. Highly electrically conductive indium-tin-oxide thin films epitaxially grown on yttria-stabilized zirconia (100) by pulsed-laser deposition10.1063/1.126461 ↗
8. ZnMgBeO/Ag/ZnMgBeO transparent multilayer films with UV energy bandgap and very low resistance10.1016/j.ceramint.2015.12.053 ↗
9. Optical and electrical properties of In-doped CdO thin films fabricated by pulse laser deposition10.1016/j.apsusc.2009.11.049 ↗
10. Multilayer transparent top electrode for solution processed perovskite/Cu(In, Ga)(Se, S) 2 four terminal tandem solar cells10.1021/acsnano.5b03189 ↗
11. Investigation of material properties and defect behavior in In-doped CdO films10.1016/j.apsusc.2018.04.221 ↗
12. Realization of highly conductive Ga-doped ZnO film with abnormally wide band-gap using magnetron sputtering by simply lowering working pressure10.1016/j.actamat.2017.03.033 ↗
13. In plane conducting channel at the interface of CdO-ZnO isotype thin film heterostructure10.1016/j.jallcom.2015.01.168 ↗
14. Dysprosium-doped cadmium oxide as a gateway material for mid-infrared plasmonics10.1038/nmat4203 ↗
15. Optical and electrical properties of In-doped CdO thin films fabricated by pulse laser deposition10.1016/j.apsusc.2009.11.049 ↗
16. Large area roll-to-roll sputtering of transparent ITO/Ag/ITO cathodes for flexible inverted organic solar cell modules10.1016/j.orgel.2015.12.009 ↗
17. Design and development of ITO/Ag/ITO spectral beam splitter coating for photovoltaic-thermoelectric hybrid systems10.1016/j.solener.2016.11.027 ↗