journal article·2018-06

Broadband spectral response of diamond wire sawn mc-Si solar cell with omnidirectional performance and improved appearance

Y.F. Zhuang, S.H. Zhong, H.Y. Xu, W.Z. Shen

Publisher page

Abstract

Abstract Highly efficient diamond wire sawn (DWS) multi-crystalline Si (mc-Si) solar cells with a satisfactory visual appearance are expecting to dominate the photovoltaic industry soon. Here, we report the realization of broadband spectral response of DWS mc-Si solar cells with omnidirectional performance and improved appearance. The success lies in the effective surface texturization based on MACE technique followed by post acid modification and the introduction of SiO2/SiNx stack layers on the rear side. Bowl-like pits with an open size of about 1 µm are uniformly formed on the Si surface regardless of the crystallographic directions, which significantly enhances the antireflection ability in the short wavelength and makes the grain boundaries less noticeable. We have also shown that the bowl-like textured cells possess exceptional optical absorption over wide angles of incidence from 0° to 70°. Moreover, the SiO2/SiNx stack layers enhance the rear internal reflection and passivation, effectively increasing the long wavelength absorption and suppressing the electrical losses. We have successfully mass-produced DWS mc-Si solar cells with an average efficiency of 19.1%, which is 1.2% absolutely higher than that of the conventional micro-textured counterparts.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Next-generation multi-crystalline silicon solar cells: diamond-wire sawing, nano-texture and high efficiency10.1016/j.solmat.2015.05.030 ↗
2. Characterization of polycrystalline silicon wafers for solar cells sliced with novel fixed-abrasive wire10.1002/pip.923 ↗
3. Textural development of SiC and diamond wire sawed scsilicon wafer10.1016/j.egypro.2012.07.072 ↗
4. Fixed abrasive diamond wire machining-part I: process monitoring and wire tension force10.1016/S0890-6955(02)00215-8 ↗
5. A. Bidiville, K. Wasmer, R. Kraft, C. Ballif, Diamond wire-sawn silicon wafers- from the lab to the cell production, in: Proceedings 24th EU PV-SEC, 2009.
6. Thin Czochralski silicon solar cells based on diamond wire sawing technology10.1016/j.solmat.2011.11.028 ↗
7. Photovoltaic Roadmap 2016, China Photovoltaic Industry Association (CPIA).
8. Light trapping in silicon nanowire solar cells10.1021/nl100161z ↗
9. Excellent antireflection properties of vertical silicon nanowire arrays10.1016/j.solmat.2010.02.033 ↗
10. Silicon nanowires for photovoltaic solar energy conversion10.1002/adma.201002410 ↗
11. Realization of high performance silicon nanowire based solar cells with large size10.1088/0957-4484/24/23/235402 ↗
12. Silicon nanowires for advanced energy conversion and storage10.1016/j.nantod.2012.12.009 ↗
13. High-efficiency nanostructured silicon solar cells on a large scale realized through the suppression of recombination channels10.1002/adma.201401553 ↗
14. An 18.2%-efficient black-silicon solar cell achieved through control of carrier recombination in nanostructures10.1038/nnano.2012.166 ↗
15. One-step-MACE nano/microstructures for high-efficient large-size multicrystalline Si solar cells10.1016/j.solmat.2015.07.017 ↗
16. 18.45%-efficient multi-crystalline silicon solar cells with novel nanoscale pseudo-pyramid texture10.1002/adfm.201401589 ↗
17. Pre-texturing multi-crystalline silicon wafer via a two-step alkali etching method to achieve efficient nanostructured solar cells10.1016/j.solmat.2016.08.032 ↗
18. Versatile strategies for improving the performance of diamond wire sawn mc-Si solar cells10.1016/j.solmat.2016.04.014 ↗
19. Parasitic absorption in the rear reflector of a silicon solar cell: simulation and measurement of the sub-bandgap reflectance for common dielectric/metal reflectors10.1016/j.solmat.2013.06.024 ↗
20. Towards 20% efficient large-area screen-printed rear-passivated silicon solar cells10.1002/pip.1198 ↗
21. 20.0% efficiency Si nano/microstructures based solar cells with excellent broadband spectral response10.1002/adfm.201503553 ↗
22. F. Ye, W. Deng, W. Guo, R. Liu, D. Chen, Y. Yang, N. Yuan, J. Ding, Z. Feng, P. Altermatt, P. Verlinden, 22.13% efficient industrial p-type mono PERC solar cell, in: Proceedings 43rd IEEE Photovoltaic Spec. Conference, 2016.10.1109/PVSC.2016.7750289 ↗
23. Metal-assisted chemical etching of silicon: a review10.1002/adma.201001784 ↗
24. Fabrication of p-type porous silicon nanowire with oxidized silicon substrate through one-step MACE10.1016/j.jssc.2014.02.037 ↗
25. Metal-assisted chemical etching of silicon in HF-H2O210.1016/j.electacta.2008.03.009 ↗
26. R. Einhaus, E. Vazsonyi, J. Szlufcik, J. Nijs, R. Merten, Isotropic texturing of multicrystalline silicon wafers with acidic texturing solutions, in: Proceedings 26th IEEE Photovoltaic Spec. Conference, 1997.
27. Improving metal reflectors by suppressing surface plasmon polaritons: a priori calculation of the internal reflectance of a solar cell10.1038/lsa.2013.62 ↗
28. Dimensionless solution of the equation describing the effect of surface recombination on carrier decay in semiconductors10.1063/1.357521 ↗
29. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗