Laser-induced local phase transformation of CIGSe for monolithic serial interconnection: Analysis of the material properties
Source abstract
Abstract
Abstract The change of electrical conductivity in chalcopyrite (i.e., Cu(Inx, Ga1−x)Se2 or CIGSe) solar cells induced by nanosecond laser pulses is investigated as a function of the elemental composition and its spatial distribution. The underlying laser induced phase transformation process, which results in a decomposition of the CIGSe semiconductor and a modification of its elemental composition, is utilized to form the monolithic series interconnection between front and back contact in CIGSe based thin film solar cells. The results show a dependence of the composition of the CIGSe layer and the resulting series resistance on the applied laser fluence. Lower series resistance is primarily related to an enhanced fraction of copper, gallium and zinc in the laser transformed zone resulting from selective vaporization of absorber elements. For intermediate laser fluences (~0.36 J/cm2) a patterning process is established that allows reliable and high-quality series interconnection. Both, lower and higher laser fluences result in high series resistances due to incomplete phase transformation or damages of the back contact, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Laser Material Processing Techniques · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Solar Cells: materials, manufacture and operation
2. Solar Frontier, News page, 〈http://www.solar-frontier.com/eng/news/2015/C051171.html〉, (accessed 12.08.2015).
3. Comparative investigation of solar cell thin film processing using nanosecond and femtosecond lasers10.1088/0022-3727/39/3/005 ↗
4. P.-O. Westin, M. Edoff, Materials analysis of laser treated CIGS, in: Proceedings of the 23th European Photovoltaic Solar Energy Conference, 2008, pp. 2558–2561.
5. R. Witte, B. Frei, S. Schneeberger, A. Burn, V. Romano, S. Buecheler, Optimized laser scribing of CIGS processes in substrate configuration, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, 2011, pp. 2986–2991.
6. T. Repmann, H.-P. Kurz, M. Tech, P. Bockstadt, M. Oertel, D. Walter, D. Soeryanto, C. Jahn, J. Müller, K. Orgassa, Laser processing for high efficient CIGS modules, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference, 2012, pp. 2114–2117.
7. Laser scribing of polycrystalline thin films10.1016/S0143-8166(00)00061-0 ↗
8. B. Stegemann, M. Schuele, C. Schultz, K. Stelmaszczyk, M. Weizman, C. Wolf, C.A. Kaufmann, B. Rau, R. Schlatmann, V. Quaschning, F. Fink, Picosecond and nanosecond laser structuring of CIGSe solar cells, in: Proceedings of the Technical Digest 6th World Conference on Photovoltaic Energy Conversion, 2015, pp. 319–320.
9. Demonstration of the monolithic interconnection on CIS solar cells by picosecond laser structuring on 30 by 30 cm2 modules10.1002/pip.2552 ↗
10. B. Stegemann, M. Schuele, C. Schultz, K. Stelmaszczyk, M. Weizman, C. Wolf, C.A. Kaufmann, B. Rau, R. Schlatmann, F. Fink, Electrical and structural functionality of CIGSe solar cells patterned with picosecond laser pulses of different wavelength, in: Proceedings of the 42nd IEEE Photovoltaic Specialist Conference, 2015, pp. 1–4.10.1109/PVSC.2015.7355780 ↗
11. A monolithically integrated high-efficiency Cu(In,Ga)Se2 mini-module structured solely by laser10.1002/pip.2583 ↗
12. An investigation into CIGS thin-films solar cell P2 layer scribing depth and width using different laser process parameters
13. Ultra-short laser patterning of thin-film CIGS solar cells through glass substrate10.1007/s12541-013-0175-y ↗
14. CIGS P3 scribing using ultrashort laser pulses and thermal annealing10.1007/s00339-015-9207-z ↗
15. Next generation interconnective laser patterning of CIGS thin film modules10.1016/j.solmat.2010.11.015 ↗
16. Thermal decomposition of ternary chalcopyrite thin films10.7567/JJAPS.32S3.65 ↗
17. C. Schultz, M. Schuele, K. Stelmaszczyk, M. Weizman, O. Gref, F. Friedrich, C. Wolf, C.A. Kaufmann, B. Rau, R. Schlatmann, F. Fink, B. Stegemann, Controlling the thermal impact of ns laser pulses for the preparation of the P2 interconnect by local phase transformation in CIGSe, in: Proceedings of the 42nd IEEE Photovoltaic Specialist Conference, 2015, pp. 1–4.10.1109/PVSC.2015.7355961 ↗
18. M. Schuele, C. Schultz, V. Juzumas, K. Stelmaszczyk, M. Weizman, C. Wolf, N. Papathanasiou, B. Rau, R. Schlatmann, V. Quaschning, B. Stegemann, F. Fink, Laser patterning of CIGSe solar cells using nano- and picosecond pulses – possibilities and challenges, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference, 2013, pp. 2302–2306.
19. C. Schultz, M. Schüle, M. Richter, H.-U. Pahl, H. Endert, J. Bonse, I. Dirnstorfer, B. Rau, R. Schlatmann, V. Quaschning, F. Fink, B. Stegemann, P1, P2 and P3 structuring of CIGSe solar cells with a single laser wavelength, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, 2011, pp. 2540–2543.
20. Simple technique for measurement of pulsed Gaussian-beam spot sizes10.1364/OL.7.000196 ↗
21. Baseline meets innovation: Technology transfer for high-efficiency thin-film Si and CIGS modules at PVcomB
22. Fast atmospheric processing of Cu(In,Ga)(Se,S)2 solar cell absorber layers using elemental selenium vapor
23. Silicon nanodot layers for photovoltaic application: Size/ density control and electrical properties10.1515/zpch-2014-0482 ↗
24. Phase equilibria of Cu-In-Se. III. The In2Se3-Se-Cu2Se subsystems
25. M. Richter, C. Schultz, J. Bonse, H.-U. Pahl, H. Endert, B. Rau, R. Schlatmann, V. Quaschning, B. Stegemann, F. Fink, Laser-ablation behavior of thin-film materials used in silicon and CIGSe based solar cells, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, 2011, pp. 2943–2946.
26. Thin film removal mechanisms in ns-laser processing of photovoltaic materials10.1016/j.tsf.2009.10.135 ↗
27. Phases, morphology, and diffusion in CuInxGa1-xSe2 thin films10.1063/1.366122 ↗
28. Direct evidence for diffusion and electromigration of Cu in CuInSe210.1063/1.366252 ↗
29. Characterization of Cu(In,Ga)Se2 films by Raman scattering10.1016/S0254-0584(01)00345-5 ↗
30. Enhancement of Raman cross section in CdS due to resonant absorption10.1103/PhysRevLett.17.10 ↗
31. Raman investigations of Cu(in,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
32. Kogidala · 2010
33. Bäuerle · 2011
34. Haynes · 2012
35. Selenium self-diffusion study in the 1-3-62 semiconductor: CuInSe2