Simultaneous enhancement in both large-area coatability and photovoltaic performance of inverted organic solar cells with co-solvent
Source abstract
Abstract
We report our observation of simultaneous enhancement in large-area coatability and photovoltaic performance for blade-coated inverted P3HT:PCBM organic solar cells with DCB:hexane co-solvent. The addition of hexane improves greatly the wettability of P3HT:PCBM blend layer on Cs2CO3 treated ITO and leads to excessively higher P3HT surface concentration due to the incongruent evaporation of hexane and DCB. A post-processing light soaking was found to further improve the photovoltaic performance for blade-coated devices prepared with co-solvent by adjusting the P3HT surface concentration ratio for more favorable carrier transport, as evidenced by the disappearance of current suppression at forward bias and significant increase in Voc after light soaking. Since large-area manufacturing is the key to full commercialization of organic solar cells, the use of co-solvent, combined with light soaking, may be crucial for the development of inverted organic solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. On the effect of poly(3-hexylthiophene) regioregularity on inkjet printed organic solar cells10.1039/b823495g ↗
3. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
4. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
5. A complete process for production of flexible large area polymer solar cells entirely using screen printing-first public demonstration10.1016/j.solmat.2008.12.001 ↗
6. Polymer solar cell by blade coating10.1016/j.orgel.2009.03.001 ↗
7. Fabrication of large area photovoltaic devices containing various blends of polymer and fullerene derivatives by using the doctor blade technique
8. Bladed organic photovoltaic cells10.1016/j.cap.2010.11.004 ↗
9. Gravure printing inverted organic solar cells: The influence of ink properties on film quality and device performance10.1016/j.solmat.2012.04.025 ↗
10. All-spray-coated semitransparent inverted organic solar cells: from electron selective to anode layers10.1016/j.orgel.2012.08.012 ↗
11. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
12. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
13. Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cell10.1016/j.solmat.2008.12.013 ↗
14. Printing highly efficient organic solar cells10.1021/nl801365k ↗
15. ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
16. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
17. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
18. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
19. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
20. Roll-to-Roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
21. Control of film defects in solventborne high-solids coatings: the non-additives vs. a new additives approach10.1007/BF02697843 ↗
22. Study on different planforms of paint's solvents and the effect of surfactants10.1016/j.porgcoat.2003.09.020 ↗
23. Materials interface engineering for solution-processed photovoltaics10.1038/nature11476 ↗
24. 1,8-octanedithiol as a processing additive for bulk heterojunction materials: enhanced photoconductive response10.1063/1.2969405 ↗
25. Effects of solvent mixtures on the nanoscale phase separation in polymer solar cells10.1002/adfm.200701459 ↗
26. Optimization of process parameters for high-efficiency polymer photovoltaic devices based on P3HT:PCBM system10.1016/j.solmat.2007.04.001 ↗
27. Reel-to-reel wet coating by variation of solvents and compounds of photoactive inks for polymer solar cell production10.1016/j.solmat.2012.06.048 ↗
28. Continuous blade coating for multi-layer large-area organic light-emitting diode and solar cell10.1063/1.3636398 ↗
29. Efficient inverted organic solar cells without an electron selective layer10.1039/c0jm04269b ↗
30. Enhancing the photocurrent in poly(3-hexylthiophene)/[6,6]-phenyl C61 butyric acid methyl ester bulk heterojunction solar cells by using poly(3-hexylthiophene) as a buffer layer10.1063/1.3242006 ↗
31. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
32. Double and triple junction polymer solar cells processed from solution10.1063/1.2719668 ↗
33. Phase separation in polyfluorene-based conjugated polymer blends: lateral and vertical analysis of blend spin-cast thin films10.1021/ma035750i ↗
34. Efficient conjugated-polymer optoelectronic devices fabricated by thin-film transfer-printing technique10.1002/adfm.200701321 ↗
35. Vertical phase separation in poly(3-hexylthiophene):fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗
36. Solvent additives and their effects on blend morphologies of bulk heterojunctions10.1039/C0JM01976C ↗
37. The formation of different structures of poly(3-hexylthiophene) film on a patterned substrate by dip coating from aged solution10.1088/0957-4484/21/14/145303 ↗
38. Brandrup · 1999