journal article·2015-10Open access

The effect of nanocrystal reaction time on Cu2ZnSn(S,Se)4 solar cells from nanocrystal inks

Andrew D. Collord, Hugh W. Hillhouse

Abstract

Abstract The sintering of nanocrystals to form a bulk film is a promising route for the production of low cost Cu2ZnSn(S,Se)4 solar cells. However, very little is known about how the synthesis of the nanocrystals impacts the properties of the sintered film or the performance of the resulting photovoltaic device. Here, we present a study in which devices were made from NC inks with different reaction times. Variation in reaction time produces inks with different average size, composition, and compositional heterogeneity. Accounting for the influence of composition, we find that longer NC reaction times result in improved current collection, larger quasi-Fermi level splitting, lower defect concentrations, and higher power conversion efficiency in the selenized devices. The improvements correlate well with the breadth of the x-ray diffraction peaks, suggesting that the longer reaction times result in larger crystalline domain sizes, and that grain boundaries may act as non-radiative recombination sites. Further, the crystalline domain size in the sintered film is proportional to the mean NC size in the ink, suggesting that some interparticle sintering occurs but that the ultimate grain size in the film is dependent on the starting NC size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
2. Q. Guo, Y. Cao, J.V. Caspar, W.E. Farneth, A.S. Ionkin, L.K. Johnson, M. Lu, I. Malajovich, D. Radu, K.R. Choudhury, H.D. Rosenfeld, W. Wu, A simple solution-based route to high-efficiency CZTSSe thin-film solar cells, in: Proceedings of the 38th IEEE Photovoltaics Specialist Conference, Austin, TX, 2012, pp. 002993–00299610.1109/PVSC.2012.6318213 ↗
3. All-inorganic field effect transistors fabricated by printing10.1126/science.286.5440.746 ↗
4. Structural, optical, and electrical properties of PbSe nanocrystal solids treated thermally or with simple amines10.1021/ja800040c ↗
5. PbSe nanocrystal solids for n- and p-channel thin film field-effect transistors10.1126/science.1116703 ↗
6. Sulfide nanocrystal inks for dense Cu(In,Ga)(S,Se)2 absorber films and their photovoltaic performance10.1021/nl901538w ↗
7. 9.0% Efficient Cu2ZnSn(S,Se)4 solar cells from selenized nanoparticle inks10.1002/pip.2472 ↗
8. Low-cost CIGS solar cells by paste coating and selenization10.1016/j.tsf.2004.11.007 ↗
9. Influence of an additional carbon layer at the back contact–absorber interface in Cu(In,Ga)Se2 thin film solar cells10.1016/j.tsf.2010.12.140 ↗
10. Nearly carbon-free printable CIGS thin films for solar cell applications10.1016/j.solmat.2011.05.048 ↗
11. Growth mechanism of thermally processed Cu(In,Ga)S2 precursors for printed Cu(In,Ga)(S,Se)2 solar cells10.1002/pssr.201206191 ↗
12. Composition control and formation pathway of CZTS and CZTGS nanocrystal inks for kesterite solar cells10.1021/acs.chemmater.5b00104 ↗
13. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
14. A simple and efficient solar cell parameter extraction method from a single current–voltage curve10.1063/1.3632971 ↗
15. Electronic and optical properties of Cu2ZnSnS4 and Cu2ZnSnSe410.1063/1.3318468 ↗
16. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
17. A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/ja308862n ↗
18. Thermodynamic aspects of the synthesis of thin-film materials for solar cells10.1002/cphc.201200067 ↗
19. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗
20. On the Sn loss from thin films of the material system Cu–Zn–Sn–S in high vacuum10.1063/1.3273495 ↗
21. Cu2ZnSn(S,Se)4 solar cells from inks of heterogeneous Cu–Zn–Sn–S nanocrystals10.1016/j.solmat.2014.01.016 ↗
22. Abundance of [CuZn+SnZn] and [2CuZn+SnZn] defect clusters in kesterite solar cells10.1063/1.4768215 ↗
23. Compositional dependence of structural and electronic properties of Cu2ZnSn(S,Se)4 alloys for thin film solar cells10.1103/PhysRevB.83.125201 ↗
24. Intrinsic point defects and complexes in the quaternary kesterite semiconductor Cu2ZnSnS410.1103/PhysRevB.81.245204 ↗
25. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
26. The role of secondary phase precipitation on grain boundary electrical activity in CuZnSnS4 (CZTS) photovoltaic absorber layer material10.1063/1.4769738 ↗
27. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 Earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
28. Direct evidence of current blocking by ZnSe in Cu2ZnSnSe4 solar cells10.1063/1.4706256 ↗
29. T. Unold, S. Kretzschmar, J. Just, O. Zander, B. Schubert, B. Marsen, H. Schock, Correlation between composition and photovoltaic properties of Cu2ZnSnS4 thin film solar cells, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC), 2011, pp. 002820–002823.10.1109/PVSC.2011.6186531 ↗
30. Determination of secondary phases in kesterite Cu2ZnSnS4 thin films by x-ray absorption near edge structure analysis10.1063/1.3671994 ↗
31. Why do we make Cu(In,Ga)Se2 solar cells non-stoichiometric?10.1016/j.solmat.2013.04.014 ↗
32. Influence of copper excess on the absorber quality of CuInSe210.1063/1.3648111 ↗
33. Imaging and phase identification of Cu2ZnSnS4 thin films using confocal Raman spectroscopy10.1116/1.3625249 ↗
34. In-depth resolved Raman scattering analysis for the identification of secondary phases: characterization of Cu2ZnSnS4 layers for solar cell applications10.1063/1.3587614 ↗
35. Engineering grain boundaries in Cu2ZnSnSe4 for better cell performance: a first-principle study10.1002/aenm.201300712 ↗
36. Structure and electronic properties of grain boundaries in earth-abundant photovoltaic absorber Cu2ZnSnSe410.1021/nn203230g ↗