Prototype design and development of low-load-roof photovoltaic modules for applications in on-grid systems
Source abstract
Abstract
Four prototypes of lightweight photovoltaic modules for applications in on-grid systems have been designed, developed, manufactured and tested for compliance with relevant IEC standards. Selected, commercially available materials characterized by thermogravimetry , differential scanning calorimetry , dilatometry , scanning electron microscopy and nanoindentation technique were used in frameless, adhesively-bonded sandwich-structures carrying the interdigitated back contact solar cells . With dedicated manufacturing processes the prototype-dependent weight between 3.37 and 3.77 kg/m 2 , the STC-maximum power in the range of 221–239 Wp together with power conversion efficiencies of 19.98–20.71% were obtained. Millimetre-sized texture improved module's performance for steeper solar incidence angles . The self-cleaning capability of modules was enhanced by a hydrophobic material utilized in front linings. The structure of the prototypes helps to build non-intrusive installations on low-load capacity roofs, even in large-scale lightweight buildings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · solar cell performance optimization · Photovoltaic Systems and Sustainability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. 2019
2. Burger · 2019
3. Jäger-Waldau · 2019
4. Schmela · 2018
5. Berger · 2018
6. Thermo-mechanical stability of lightweight glass-free photovoltaic modules based on a composite substrate10.1016/j.solmat.2018.07.015 ↗
7. Current and future priorities for mass and material in silicon PV module recycling
8. A comparison of 15 polymers for application in photovoltaic modules in PV-powered boats10.1016/j.apenergy.2011.10.042 ↗
9. Light and durable: composite structures for building‐integrated photovoltaic modules10.1002/pip.3009 ↗
10. Robust glass-free lightweight photovoltaic modules with improved resistance to mechanical loads and impact10.1109/JPHOTOV.2018.2876934 ↗
11. Optimisation of the frontsheet encaspulant for increased resistance of lightweight glass-free solar PV modules
12. Fracture mechanics and testing of interface adhesion strength in multilayered structures – application in advanced solar PV materials and technology10.1016/j.proeng.2015.09.232 ↗
13. Novel lighter weight crystalline silicon photovoltaic module using acrylic-film as a cover sheet10.7567/JJAP.53.092302 ↗
14. Enabling curvable silicon photovoltaics technology using polycarbonate-sandwiched laminate design10.1016/j.solener.2021.03.021 ↗
15. Lightweight PV module approach - field test study and yield evaluation
16. Numerical simulation of the evolution of stress in solar cells during the entire manufacturing cycle of a conventional silicon wafer based photovoltaic laminate10.1109/JPHOTOV.2017.2775158 ↗
17. Encapsulation and backsheet adhesion metrology for photovoltaic modules10.1002/pip.2817 ↗
18. Superhydrophobic materials and coatings: a review10.1088/0034-4885/78/8/086501 ↗
19. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
20. Textured glass and antireflective-coated glass for string ribbon PV modules
21. The influence of textured surfaces of solar cells and modules on the energy rating of PV systems
22. Daily power output increase of over 3% with the use of structured glass in monocrystalline silicon PV modules
23. Wirth · 2016
24. Relation between degredation of polymeric components in crystalline silicon PV module and climatic conditions: a literature review10.1016/j.solmat.2018.12.027 ↗
25. Köntges · 2014
26. Energy yield loss caused by dust deposition on photovoltaic panels10.1016/j.solener.2014.05.030 ↗
27. Power loss due to soiling on solar panel: a review10.1016/j.rser.2016.01.044 ↗
28. An analytical indoor experimental study on the effect of soiling on PV, focusing on dust properties and PV surface material10.1016/j.solener.2020.03.089 ↗
29. Performance reduction of PV systems by dust deposition10.1016/j.egypro.2014.10.013 ↗
30. Analysis of dust losses in photovoltaic modules
31. Impact of soiling on IV-curves and efficiency of PV-modules10.1016/j.solener.2014.12.003 ↗
32. Degradation of electrical performance of a crystalline photovoltaic module due to dust deposition in northern Poland10.1016/j.renene.2015.01.018 ↗
33. Definitions for hydrophilicity, hydrophobicity, and superhydrophobicity: getting the basics right10.1021/jz402762h ↗
34. Aluminium Feron GmbH & Co · 2020
35. Towards standardized testing methodologies for optical properties of components in concentrating solar thermal power plants
36. 2015
37. Determination of eva cross-linking degree after lamination process by extraction and optical transmission measuring
38. Optimization of solar module encapsulant lamination by optical constant determination of ethylene-vinyl acetate
39. Investigation of the photodegradation behaviors of an ethylene/vinyl acetate copolymer solar cell encapsulant and effects of antioxidants on the photostability of the material10.1002/app.27428 ↗
40. Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: a critical review10.1016/0927-0248(95)00150-6 ↗
41. Investigation of the degradation and stabilization of EVA-based encapsulant in field-aged solar energy modules10.1016/S0141-3910(96)00162-0 ↗
42. UV aging behaviour of ethylene-vinyl acetate copolymers (EVA) with different vinyl acetate contents
43. Comparison of different microclimate effects on the aging behavior of encapsulation materials used in photovoltaic modules10.1016/j.polymdegradstab.2017.03.010 ↗
44. Degradation effects in sc--Si PV modules subjected to natural and induced ageing after several years of field operation
45. Nanoindentation analysis of PV module polymeric components after accelerated aging
46. Correlation between nanoindentation test result and Vickers hardness
47. 2013
48. Determination of thermal properties of crosslinked EVA encapsulant material in outdoor exposure by TSC and DSC methods10.1016/j.renene.2013.10.013 ↗
49. Outdoor monitoring of antireflective and textured cover glasses for solar modules at different sites in Germany, Spain and China of up to 3 years
50. Evaluating the outdoor performance of PV modules with different glass textures
51. Wróblewski · 2020
52. Masterplatex · 2021
53. 1994
54. Ahmed · 2012
55. Denman · 1966
56. Thermal expansion of epoxy-fiberglass composite specimens10.1007/BF00504243 ↗
57. 1998 · 2 nd
58. Hail resistance of composite-based glass-free lightweight modules for building integrated photovoltaics applications
59. 2003
60. Corp · 2017
61. Oku · 2017
62. High-efficiency crystalline silicon solar cells: status and perspectives10.1039/C5EE03380B ↗
63. Solar cell efficiency tables (version 54)10.1002/pip.3171 ↗
64. Ärnström · 2019 · vol. 6 · 175 43
65. Ärnström · 2019 · vol. 6 · 175 43
66. Ärnström · 2019 · vol. 6 · 175 43
67. Ärnström · 2019 · vol. 6 · 175 43
68. Beyond watt per module and costs per watt – new weight related parameters for photovoltaic modules
69. Multifaceted analyses of four different prototype lightweight photovoltaic modules of novel structure10.3390/en14082239 ↗