journal article·2019-09

Tunable thiocyanate-doped perovskite microstructure via water-ethanol additives for stable solar cells at ambient conditions

Ivy M. Asuo, Ibrahima Ka, Dawit Gedamu, Alain Pignolet, Riad Nechache, Sylvain G. Cloutier

Publisher page

Abstract

Abstract Organic-inorganic halide perovskite materials have emerged as highly efficient solar absorbers produced under low-cost processing conditions. However, due to the hygroscopic nature of halide perovskite materials, moisture significantly affects the stability, lifetime and performance of the device. In this work, we combine thiocyanate-doped pseudohalide perovskite with additive solvents to achieve compact films showing high-quality crystal grains with improved longevity of the perovskite films using a simple two-step spin-coating method under ambient conditions. Indeed, we confirm that humidity has a profound impact on the crystal quality. Perovskite films with grain sizes as large as 4 μm are produced in high humidity conditions, using methylammonium iodide precursor solution mixed with deionized water and ethanol. Power conversion efficiencies up-to 9.4% have been achieved for optimized planar device architectures fabricated above 60% relative humidity. Scanning electron microscopy, X-ray diffraction and current-voltage characteristics for devices stored in ambient conditions for more than 480 h show that the films are quite stable with only a 12% decay of their initial power conversion efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Mitzi David · 1999 · vol. 48
2. Elucidating the charge carrier separation and working mechanism of CH3NH3PbI3−xClx perovskite solar cells10.1038/ncomms4461 ↗
3. The light and shade of perovskite solar cells10.1038/nmat4065 ↗
4. Solution chemistry engineering toward high-efficiency perovskite solar cells10.1021/jz501983v ↗
5. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
6. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
7. Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells10.1021/jz4020162 ↗
8. Perovskite solar cells: from materials to devices10.1002/smll.201402767 ↗
9. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
10. Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells10.1038/nnano.2014.181 ↗
11. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
12. Planar heterojunction perovskite solar cells via vapor-assisted solution process10.1021/ja411509g ↗
13. Efficient and uniform planar-type perovskite solar cells by simple sequential vacuum deposition10.1002/adma.201402461 ↗
14. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
15. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
16. High-performance nanotube-enhanced perovskite photodetectors10.1038/srep45543 ↗
17. Advancements in the stability of perovskite solar cells: degradation mechanisms and improvement approaches10.1039/C5RA27424A ↗
18. Review of recent progress in chemical stability of perovskite solar cells10.1039/C4TA04994B ↗
19. Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells10.1039/C3TA13606J ↗
20. Tailoring mixed-halide, wide-gap perovskites via multistep conversion process10.1021/acsami.6b01246 ↗
21. High charge carrier mobilities and lifetimes in organolead trihalide perovskites10.1002/adma.201305172 ↗
22. The impact of the crystallization processes on the structural and optical properties of hybrid perovskite films for photovoltaics10.1021/jz501877h ↗
23. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
24. Crystallization of a perovskite film for higher performance solar cells by controlling water concentration in methyl ammonium iodide precursor solution10.1039/C5NR06687E ↗
25. Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells10.1021/nl400349b ↗
26. Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides10.1038/nchem.2324 ↗
27. Controllable perovskite crystallization by water additive for high-performance solar cells10.1002/adfm.201503559 ↗
28. The synergistic effect of H2O and DMF towards stable and 20% efficiency inverted perovskite solar cells10.1039/C6EE03586H ↗
29. High efficiency stable inverted perovskite solar cells without current hysteresis10.1039/C5EE00645G ↗
30. Moisture assisted perovskite film growth for high performance solar cells10.1063/1.4901510 ↗
31. Efficient and reproducible CH3NH3PbI3-x(SCN)x perovskite based planar solar cells10.1039/C5CC03615A ↗
32. Pseudohalide (SCN(-))-Doped MAPbI3 perovskites: a few surprises10.1021/acs.jpclett.5b01327 ↗
33. Pseudohalide-induced moisture tolerance in perovskite CH3NH3Pb(SCN)2I thin films10.1002/anie.201503038 ↗
34. Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity10.1038/ncomms11105 ↗
35. Low-pressure vapor-assisted solution process for thiocyanate-based pseudohalide perovskite solar cells10.1002/cssc.201600674 ↗
36. (CH3NH3)2Pb(SCN)2I2: a more stable structural motif for hybrid halide photovoltaics?10.1021/acs.jpclett.5b02177 ↗
37. Employing lead thiocyanate additive to reduce the hysteresis and boost the fill factor of planar perovskite solar cells10.1002/adma.201600594 ↗
38. Organometal halide perovskite solar cells: degradation and stability10.1039/C5EE02733K ↗
39. Proof-of-concept for facile perovskite solar cell recycling10.1039/C6EE02013E ↗
40. Hysteresis-free 1D network mixed halide-perovskite semitransparent solar cells10.1002/smll.201802319 ↗
41. Effect of relative humidity on crystal growth, device performance and hysteresis in planar heterojunction perovskite solar cells10.1039/C5NR04179A ↗
42. Transformation of the excited state and photovoltaic efficiency of CH3NH3PbI3 perovskite upon controlled exposure to humidified air10.1021/ja511132a ↗
43. Interaction of organic cation with water molecule in perovskite MAPbI3 : from dynamic orientational disorder to hydrogen bonding10.1021/acs.chemmater.6b02883 ↗
44. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
45. Organolead halide perovskite: new horizons in solar cell research10.1021/jp409025w ↗
46. Bestimmung der Größe und der inneren Struktur von Kolloidteilchen mittels Röntgenstrahlen, Nachrichten von Der Gesellschaft Der Wissenschaften Zu Göttingen
47. The effect of solvents on the performance of CH3NH3PbI3 perovskite solar cells10.3390/en10050599 ↗
48. Insight into evolution, processing and performance of multi-length-scale structures in planar heterojunction perovskite solar cells10.1038/srep13657 ↗
49. Solvent and intermediate phase as boosters for the perovskite transformation and solar cell performance10.1038/srep25648 ↗
50. Polytypism and the vibrational properties of PbI210.1103/PhysRevB.19.2305 ↗
51. Resonance Raman and excitation energy dependent charge transfer mechanism in halide-substituted hybrid perovskite solar cells10.1021/nn507345e ↗
52. Advanced Raman spectroscopy of methylammonium lead iodide: development of a non-destructive characterisation methodology10.1038/srep35973 ↗
53. High-performance pseudo-halide perovskite nanowire networks for stable and fast-response photodetector10.1016/j.nanoen.2018.06.057 ↗
54. Toward high-efficiency solution-processed planar heterojunction Sb2S3 solar cells
55. Heterogeneity in polymer solar cells: local morphology and performance in organic photovoltaics studied with scanning probe microscopy10.1021/ar900231q ↗
56. Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation10.1039/C5EE01265A ↗
57. Trap-assisted non-radiative recombination in organic-inorganic perovskite solar cells10.1002/adma.201405372 ↗
58. Device engineering of perovskite solar cells to achieve near ideal efficiency10.1063/1.4931130 ↗
59. 18% High-Efficiency Air-Processed Perovskite Solar Cells Made in a Humid Atmosphere of 70% RH10.1002/solr.201700097 ↗
60. Air-processed mixed-cation Cs 0.15 FA 0.85PbI 3 planar perovskite solar cells derived from a PbI 2 –CsI–FAI intermediate complex10.1039/C8TA01049H ↗
61. Effect of zinc addition on properties of cadmium sulfide layer and performance of Cu(In,Ga)Se2 solar cell10.1016/j.tsf.2012.11.077 ↗
62. Performance enhancement of flexible CZTSSe solar cells on optimized roughness substrate
63. Predicting, categorizing and intercomparing the lifetime of OPVs for different ageing tests10.1016/j.solmat.2014.06.031 ↗
64. Relating polymer chemical structure to the stability of polymer:fullerene solar cells10.1039/C7TC01455D ↗
65. High-performance perovskite solar cells by incorporating a ZnGa2O4:Eu3+ nanophosphor in the mesoporous TiO2 layer10.1016/j.solmat.2016.01.021 ↗
66. Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells10.1038/ncomms3885 ↗
67. Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity10.1038/ncomms11105 ↗
68. Amazing stable open-circuit voltage in perovskite solar cells using AgAl alloy electrode10.1016/j.solmat.2015.11.026 ↗