journal article·2014-05

Single-step annealing and encapsulation for organic photovoltaics using an exothermically-setting encapsulant material

D. Elkington, N. Cooling, X.J. Zhou, W.J. Belcher, P.C. Dastoor

Publisher page

Abstract

Abstract We report the use of a bisphenol A-based epoxy resin for use as an encapsulant material on bulk-heterojunction organic photovoltaic devices which, by way of an exothermic curing process, can also thermally anneal devices leading to increases in short circuit current density, fill factor and power conversion efficiency. As well as improving the electrical characteristics of devices, the encapsulant is effective as a barrier material to protect against degradation in air. The single-step process to both anneal and encapsulate devices could lead to improvements in the efficiency of commercial-level photovoltaic fabrication processes, a goal which is in keeping with the low-energy fabrication ethos of organic electronics in general.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Economic assessment of solar electricity production from organic-based photovoltaic modules in a domestic environment10.1039/c1ee01766g ↗
2. Long-term operational lifetime and degradation analysis of P3HT: PCBM photovoltaic cells10.1016/j.solmat.2010.09.007 ↗
3. Encapsulation of polymer photovoltaic prototypes10.1016/j.solmat.2006.06.055 ↗
4. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
5. The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices10.1039/C1RA00686J ↗
6. Determining the structural motif of P3HT:PCBM nanoparticulate organic photovoltaic devices10.1016/j.solmat.2012.11.015 ↗
7. Real-time investigation of crystallization and phase-segregation dynamics in P3HT:PCBM solar cells during thermal annealing10.1002/adfm.201002076 ↗
8. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
9. Relation between absorption and crystallinity of poly (3-hexylthiophene)/fullerene films for plastic solar cells10.1016/j.cplett.2005.11.020 ↗
10. Optical absorption of poly(3-alkylthiophenes) at low temperatures10.1016/0038-1098(89)90087-2 ↗
11. Multilayer encapsulation of plastic photovoltaic devices10.1016/j.synthmet.2005.09.035 ↗
12. Definition of encapsulation barrier requirements: a method applied to organic solar cells10.1016/j.solmat.2011.01.035 ↗
13. J.M. Boyd, D. Van Daalen, Water-Vapor-Barrier Coatings for Polyurethane Foams, US Army Materiel Development & Readiness Command, 1976.10.21236/ADA027556 ↗
14. Time-dependent morphology evolution by annealing processes on polymer:fullerene blend solar cells10.1002/adfm.200800968 ↗
15. Annealing dependent performance of organic bulk-heterojunction solar cells: a theoretical perspective10.1016/j.solmat.2011.07.006 ↗
16. PCDTBT: en route for low cost plastic solar cells10.1039/c3ta12420g ↗
17. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
18. A projection of commercial-scale organic photovoltaic module costs10.1016/j.solmat.2013.07.041 ↗