Surface and bulk effects of K in Cu1−xKxIn1−yGaySe2 solar cells
Source abstract
Abstract
Abstract Two strategies for enhancing photovoltaic (PV) performance in chalcopyrite solar cells were investigated: Cu1−xKxIn1−yGaySe2 absorbers with low K content (K/(K+Cu), or x ~ 0.07) distributed throughout the bulk, and CuIn1−yGaySe2 absorbers with KIn1−yGaySe2 grown on their surfaces. Distributing K throughout the bulk absorbers improved power conversion efficiency, open-circuit voltage (VOC) and fill factor (FF) for Ga/(Ga+In) of 0, 0.3 and 0.5. Surface KIn1−yGaySe2 and bulk x ~ 0.07 Cu1−xKxIn1−yGaySe2 films with Ga/(Ga+In), or y of 0.3 and 0.5 also had improved efficiency, VOC, and FF, relative to CuIn1−yGaySe2 baselines. On the other hand, y ~ 1 absorbers did not benefit from K introduction. Similar to Cu1−xKxInSe2, the formation of Cu1−xKxGaSe2 alloys was favored at low temperatures and high Na supply by the substrate, relative to the formation of mixed-phase CuGaSe2 + KGaSe2. KIn1−yGaySe2 alloys were grown for the first time, as evidenced by X-ray diffraction and ultraviolet/visible spectroscopy. For all Ga/(Ga+In) compositions, the surface KIn1−yGaySe2 absorbers had superior PV performance in buffered and buffer-free devices. However, the bulk x ~ 0.07 absorbers only outperformed the baselines in buffered devices. The data demonstrate that KIn1−yGaySe2 passivates the surface of CuIn1−yGaySe2 to increase efficiency, VOC, and FF, while bulk Cu1−xKxIn1−yGaySe2 absorbers with x ~ 0.07 enhance efficiency, VOC, and FF by some other mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
2. Improved photocurrent in Cu(In,Ga)Se2 solar cells: from 20.8% to 21.7% efficiency with CdS buffer and 21.0% Cd-Free10.1109/JPHOTOV.2015.2458039 ↗
3. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
4. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
5. Efficiency enhancement of Cu(In,Ga)Se2 thin-film solar cells by a post-deposition treatment with potassium fluoride10.1002/pssr.201307238 ↗
6. Investigation of the effect of potassium on Cu(In,Ga)Se2 layers and solar cells10.1016/j.tsf.2014.10.088 ↗
7. Enhanced performance in Cu(In,Ga)Se2 solar cells fabricated by the two-step selenization process with a potassium fluoride postdeposition treatment10.1109/JPHOTOV.2014.2354259 ↗
8. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
9. Defect formation in Cu(In,Ga)Se2 thin films due to the presence of potassium during growth by low temperature co-evaporation process10.1063/1.4832781 ↗
10. Features of KF and NaF postdeposition treatments of Cu(In,Ga)Se2 absorbers for high efficiency thin film solar cells10.1021/acs.chemmater.5b02335 ↗
11. Effects of sodium and potassium on the photovoltaic performance of CIGS solar cells10.1109/JPHOTOV.2016.2621343 ↗
12. R. Kamada, T. Yagioka, S. Adachi, A. Handa, K.F. Tai, T. Kato, H. Sugimoto, New world record Cu(In,Ga)(Se,S)2 thin film solar cell efficiency beyond 22%, in: Photovoltaic Specialist Conference (PVSC), 2016 IEEE 43rd, Portland, OR, 2016, pp. 1287–1291.10.1109/PVSC.2016.7749822 ↗
13. O. Lundberg, E. Wallin, V. Gusak, S. Södergren, S. Chen, S. Lotfi, F. Chalvet, U. Malm, N. Kaihovirta, P. Mende, G. Jaschke, P. Kratzert, J. Joel, M. Skupinski, P. Lindberg, T. Jarmar, J. Lundberg, J. Mathiasson, L. Stolt, Improved CIGS Modules by KF Post Deposition Treatment and Reduced Cell-to-Module Losses, in: Proceedings of the 43rd IEEE Photovoltaic Specialists Conference, Portland, OR, 2016, pp. 1–4.10.1109/PVSC.2016.7749824 ↗
14. Lepetit · 2015 · 132
15. Effect of potassium fluoride post-deposition treatment on Cu(In,Ga)Se2 thin films and solar cells fabricated onto sodalime glass substrates10.1016/j.solmat.2016.06.023 ↗
16. Revealing Surface Modifications Of Potassium-fluoride-treated Cu(In,Ga)Se2: a study of material structure, chemistry, and photovoltaic performance10.1002/admi.201600013 ↗
17. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
18. High-efficiency Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2016.08.021 ↗
19. Beneficial effect of post-deposition treatment in high-efficiency Cu(In,Ga)Se2 solar cells through reduced potential fluctuations10.1063/1.4960344 ↗
20. Effects of the incorporation of alkali elements on Cu(In,Ga)Se2 thin film solar cells10.1016/j.solmat.2016.07.015 ↗
21. Mezher · 2016 · 164
22. NREL, Best Research-Cell Efficiencies, in, NCPV, Golden, CO, 2016.
23. D. Hariskos, P. Jackson, W. Hempel, S. Paetel, S. Spiering, R. Menner, W. Wischmann, M. Powalla, Method for a high-rate solution deposition of Zn(O,S) buffer layer for high efficiency Cu(In,Ga)Se2-based solar cells, in: Proceedings of the 43rd IEEE Photovoltaic Specialists Conference, Portland, OR, 2016, pp. 1–6.10.1109/PVSC.2017.8366184 ↗
24. M.A. Contreras, B. Egaas, P. Dippo, J. Webb, J. Granata, K. Ramanathan, S. Asher, A. Swartzlander, R. Noufi, On the role of Na and modifications to Cu(In,Ga)Se2 absorber materials using thin-MF (M=Na, K, Cs) precursor layers, in: Photovoltaic Specialists Conference, 1997, Conference Record of the Twenty-Sixth IEEE, 1997, pp. 359–362.10.1109/PVSC.1997.654102 ↗
25. Effect of KF treatment of Cu(In,Ga)Se2 thin films on the photovoltaic properties of CIGS solar cells
26. KF post deposition treatment process of Cu(In,Ga)Se2 thin film effect of the Na element present in the solar cell performance
27. Na-diffusion enhanced p-type conductivity in Cu(In,Ga)Se2: a new mechanism for efficient doping in semiconductors10.1002/aenm.201601191 ↗
28. E. Ghorbani, J. Kiss, H. Mirhosseini, T.D. Kühne, C. Felser, Hybrid functional investigation of the incorporation of sodium and potassium in CuInSe2 and Cu2ZnSnSe4, in: Proceedings of the 31st European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2015, pp. 1271–1273.
29. Hybrid-functional calculations on the incorporation of Na and K impurities into the CuInSe2 and CuIn5Se8 solar-cell materials10.1021/acs.jpcc.5b07639 ↗
30. C.S. Jiang, B. To, S. Glynn, H. Mahabaduge, T. Barnes, M.M. Al-Jassim, Recent progress in nanoelectrical characterizations of CdTe and Cu(In, Ga)Se2, in: 2016 IEEE Proceedings of the 43rd Photovoltaic Specialists Conference (PVSC), 2016, pp. 3675–3680.10.1109/PVSC.2016.7750361 ↗
31. S. Karki, P. Paul, G. Rajan, T. Ashrafee, K. Aryal, P. Pradhan, R.W. Collins, A.A. Rockett, T.J. Grassman, S.A. Ringel, A.R. Arehart, S. Marsillac, In-situ and ex-situ characterizations of CIGS solar cells with KF post deposition treatment, in: Proceedings of the 43rd IEEE Photovoltaic Specialists Conference, Portland, OR, 2016, pp. 1–6.10.1109/PVSC.2017.8366044 ↗
32. C.P. Muzzillo, H.M. Tong, T.J. Anderson, The effect of Na on Cu-K-In-Se thin film growth, 〈https://arxiv.org/abs/1703.06365〉, 2017 (Submitted for pulication).
33. First-principles study on alkali-metal effect of Li, Na, and K in CuInSe2 and CuGaSe210.7567/JJAP.54.08KC20 ↗
34. E. Handick, P. Reinhard, R.G. Wilks, F. Pianezzi, R. Félix, M. Gorgoi, T. Kunze, S. Buecheler, A.N. Tiwari, M. Bär, NaF/KF post-deposition treatments and their influence on the structure of Cu(In,Ga)Se2 absorber surfaces, in: Proceedings of the 43rd IEEE Photovoltaic Specialists Conference, Portland, OR, 2016, pp. 1–15.10.1109/PVSC.2016.7749400 ↗
35. Potassium post-deposition treatment-induced band gap widening at Cu(In,Ga)Se2 surfaces – Reason for performance leap?10.1021/acsami.5b09231 ↗
36. Investigation of the potassium fluoride post deposition treatment on the CIGSe/CdS interface using hard x-ray photoemission spectroscopy – a comparative study10.1039/C6CP00260A ↗
37. Experimental indication for band gap widening of chalcopyrite solar cell absorbers after potassium fluoride treatment10.1063/1.4892882 ↗
38. D. Sommer, D. Mutter, S.T. Dunham, First-principles calculations of Na and K impurities in CuInSe2 and their effect on Cd incorporation, in: Proceeedings of the IEEE 43rd Photovoltaic Specialists Conference (PVSC), 2016, pp. 2274–2278.10.1109/PVSC.2016.7750041 ↗
39. T.M. Friedlmeier, P. Jackson, D. Kreikemeyer-Lorenzo, D. Hauschild, O. Kiowski, D. Hariskos, L. Weinhardt, C. Heske, M. Powalla, A closer look at Initial CdS growth on high-efficiency Cu(In,Ga)Se2 absorbers using surface-sensitive methods, in: Proceedings of the 43rd IEEE Photovoltaic Specialists Conference, Portland, OR, 2016, pp. 1–5.10.1109/PVSC.2016.7749634 ↗
40. Alternative to KF postdeposition treatment in high-efficiency Cu(In,Ga)Se2 thin film solar cells
41. Alkali-templated surface nanopatterning of chalcogenide thin films: a novel approach toward solar cells with enhanced efficiency10.1021/acs.nanolett.5b00584 ↗
42. T. Lepetit, S. Harel, L. Arzel, G. Ouvrard, N. Barreau, Co-evaporated KInSe2: a fast alternative to KF post-deposition treatment in high efficiency Cu(In,Ga)Se2 thin film solar cells, in: Proceedings of the 43rd IEEE Photovoltaic Specialists Conference, Portland, OR, 2016, pp. 1–4.10.1109/PVSC.2017.8366832 ↗
43. CIGS thin-film solar cells and modules on enamelled steel substrates10.1016/j.solmat.2012.01.004 ↗
44. Interfacial alkali diffusion control in chalcopyrite thin-film solar cells10.1021/am503480m ↗
45. Influence of post-deposition selenium supply on Cu(In,Ga)Se2-based solar cell properties10.1016/j.tsf.2014.10.090 ↗
46. Surface modification of CIGS film by annealing and its effect on the band structure and photovoltaic properties of CIGS solar cells10.1016/j.cap.2014.09.023 ↗
47. The impact of alkali elements on the degradation of CIGS solar cells10.1002/pip.2610 ↗
48. Properties of Cu1−xKxInSe2 alloys10.1007/s10853-016-9969-5 ↗
49. Chalcopyrites for solar cells: chemical vapor deposition, selenization, and alloying
50. Chemistry of K in Cu(In,Ga)Se2 photovoltaic absorbers: effects of temperature on Cu-K-In-Se films10.1016/j.jallcom.2017.08.019 ↗
51. C.P. Muzzillo, J.V. Li, L.M. Mansfield, K. Ramanathan, T.J. Anderson, Surface and bulk effects of K in highly efficient Cu1-xKxInSe2 solar cells, 〈https://arxiv.org/abs/1704.01560〉 2017 (Submitted for publication).10.1016/j.solmat.2018.05.013 ↗
52. Synthesis and structures of ternary chalcogenides of aluminum and gallium with stacking faults: KMQ2 (M=Al, Ga; Q=Se, Te)10.1006/jssc.1999.8523 ↗
53. Crystal data for CuGaSe210.1107/S0021889877013065 ↗
54. C.P. Muzzillo, L.M. Mansfield, C. Dehart, K. Bowers, R.C. Reedy, B. To, R. Noufi, K. Ramanathan, T.J. Anderson, The effect of Ga content on the selenization of co-evaporated CuGa/In films and their photovoltaic performance, in: Proceedings of the IEEE 40th Photovoltaic Specialist Conference (PVSC), Denver, CO, 2014, pp. 1649–1654.10.1109/PVSC.2014.6925236 ↗
55. C.P. Muzzillo, L.M. Mansfield, C. DeHart, K. Bowers, R.C. Reedy, B. To, K. Ramanathan, T.J. Anderson, Differences between CuGa/In and Cu/Ga/In films for selenization, in: Proceedings of the IEEE 42nd Photovoltaic Specialist Conference (PVSC), New Orleans, LA, 2015, pp. 1–6.10.1109/PVSC.2015.7356374 ↗
56. Review of grain interior, grain boundary, and interface effects of K in CIGS solar cells: mechanisms for performance enhancement10.1016/j.solmat.2017.07.006 ↗
57. Preparation and characterization of copper gallium diselenide thin films from the solgel-derived precursors10.1111/ijac.12059 ↗
58. The effect of composition on structural and electronic properties in polycrystalline CuGaSe2 thin film
59. Recrystallization of Cu(In,Ga)Se2 thin films studied by X-ray diffraction10.1016/j.actamat.2013.04.006 ↗
60. H.A. Al-Thani, M.M. Abdullah, F.S. Hasoon, XPS investigation of surface Proceedings of the secondary phase segregation in CIGS thin film, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference, 2011, pp. 000315–000319.10.1109/PVSC.2011.6185908 ↗
61. Control of secondary phase segregations during CuGaSe2 thin-film growth10.1116/1.1481039 ↗
62. Sodium induced secondary phase segregations in CuGaSe2 thin films10.1016/S0022-0248(01)01554-8 ↗
63. Na incorporation into Cu(In,Ga)Se2 thin-film solar cell absorbers deposited on polyimide: impact on the chemical and electronic surface structure10.1063/1.3679604 ↗
64. B.J. Stanbery, E.S. Lambers, T.J. Anderson, XPS studies of sodium compound formation and surface segregation in CIGS thin films, in: Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997, 1997, pp. 499–502.10.1109/PVSC.1997.654137 ↗
65. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
66. Optical functions and electronic structure of CuInSe2, CuGaSe2, CuInS2, and CuGaS210.1103/PhysRevB.63.075203 ↗
67. K2MM‘3Se6 (M = Cu, Ag; M‘ = Ga, In), a new series of metal chalcogenides with chain−sublayer−chain slabs: ∞1[M'Se4]−∞2[(MSe4)(M'Se4)]−∞1[M'Se4]10.1021/ic025936i ↗
68. Synthesis, structure, physical properties, and electronic structure of KGaSe210.1016/j.solidstatesciences.2012.05.028 ↗
69. Compounds in In2Se3-K2Se
70. Solid state synthesis at intermediate temperature and structural characterization of KInSe2
71. Crystal structure of pentapotassium tetraselenidogallate(III), K5GaSe410.1524/zkri.1991.197.1-2.163 ↗
72. Crystal structure of hexapotassium di-μ-selenido-bis(diselenidogallate), K6Ga2Se610.1524/zkri.1991.197.1-2.153 ↗
73. Record 1.0 V open-circuit voltage in wide band gap chalcopyrite solar cells10.1002/pip.2914 ↗