A holistic review of mismatch loss: From manufacturing decision making to losses in fielded arrays
Source abstract
Abstract
Abstract Mismatch loss relating to difference in as-manufactured cell performance is known to be nearly non-existent in a modern, undamaged, photovoltaic module. At a system level, potential contributors to this loss can include manufacturing variance, uncertainties in cell and module performance measurements and variation in operating conditions in the field. While some of these aspects have been individually studied, often using idealised performance models, there lacks a holistic treatment that assesses all the contributing effects in the same context. This is particularly important given the potential for trade-off among some of the underlying loss mechanisms in the way cells and modules are grouped and installed. This study shows, using a hybridised approach of published studies, manufacturing data, field performance data, and performance and variance modeling, that mismatch loss remains a potentially important performance loss mechanism in many photovoltaic installation. The decisions made in manufacturing pertaining to mismatch loss are found to often have only a small impact, despite potentially adding cost and complexity to the process. Conversely, field installation issues are shown to be of dominant importance in the final mismatch loss estimate. Understanding the individual contributing mechanisms, all together, will allow for the development of a realistic and least cost approach to mitigating the loss right from the decisions made in manufacturing through to how the modules are installed in the field.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · solar cell performance optimization · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. A survey on mismatching and aging of PV modules: the closed loop10.1109/TIE.2015.2418731 ↗
2. Power loss in photovoltaic arrays due to mismatch in cell characteristics10.1016/0038-092X(79)90121-X ↗
3. Simplified technique for calculating mismatch loss in mass production10.1016/j.solmat.2014.11.036 ↗
4. An investigation of mismatch losses in solar photovoltaic cell networks10.1016/j.energy.2006.06.017 ↗
5. Experimental study of mismatch and shading effects in the I-V characteristic of a photovoltaic module10.1016/j.solmat.2005.04.022 ↗
6. Analysis and control of mismatch power loss in photovoltaic arrays10.1002/pip.4670030204 ↗
7. Numerical analysis of si-based photovoltaic modules with different interconnection methods10.4313/TEEM.2014.15.2.103 ↗
8. Partial shadowing of photovoltaic arrays with different system configurations: literature review and field test results10.1016/S0038-092X(03)00155-5 ↗
9. Output characteristics of PV module considering partially reverse biased conditions10.1016/j.solener.2013.03.015 ↗
10. R. Janoch, Analysis of solar cell mismatch losses at standard and non-standard conditions., in: Conference Record of the IEEE Photovoltaic Specialists Conference, 1984, pp. 558–562.
11. Computer simulation of the effects of electrical mismatches in photovoltaic cell interconnection circuits10.1016/0379-6787(88)90059-2 ↗
12. T.J. Lambarski, D.L. Kadlec, C.B. Rogers, Effects of cell sorting and module matching on array output., in: Conference Record of the IEEE Photovoltaic Specialists Conference, 1981, pp. 841–844.
13. Mismatch losses in series combinations of silicon solar cell modules10.1016/0379-6787(88)90018-X ↗
14. The influence of mismatch of solar cells on relative power loss of photovoltaic modules10.1016/j.solener.2013.08.004 ↗
15. Effects of mismatch losses in photovoltaic arrays10.1016/0038-092X(94)00120-3 ↗
16. A study on the mismatch effect due to the use of different photovoltaic modules classes in large-scale solar parks10.1002/pip.2266 ↗
17. Monte Carlo techniques to analyse the electrical mismatch losses in large-scale photovoltaic generators10.1016/S0038-092X(97)00085-6 ↗
18. Unified methodology for determining CTM ratios: systematic prediction of module power10.1016/j.solmat.2014.06.025 ↗
19. A fill factor loss analysis method for silicon wafer solar cells10.1109/JPHOTOV.2013.2270348 ↗
20. International Electrotechnical Commission, IEC 60904-9 edition 2.0 2007-10 international standard, photovoltaic devices part 9. solar simulator performance requirements (2010).
21. The effect of manufacturing mismatch on energy production for large-scale photovoltaic plants10.1016/j.solener.2015.05.003 ↗
22. Are manufacturing I-V mismatch and reverse currents key factors in large photovoltaic arrays?10.1109/TIE.2009.2025712 ↗
23. Tigo Energy, Tigo public portal, (accessed 8 December 2015), 2015. URL 〈https://installations.tigoenergy.com〉.
24. Hilton Manufacturing, 〈https://www.hiltonmanufacturing.com.au〉. (Accessed 10 December 2015), 2015.
25. Tigo Energy, Mismatch in unshaded photovoltaic commercial arrays, (accessed 15 March 2017), 2012. URL 〈https://www.tigoenergy.com/downloads/whitepapers/〉.
26. J. Routledge, Panel level power electronics: From vision to commercial reality, UNSW School of Photovoltaic & Renewable Energy Engineering Public Seminar, 〈http://www2.pv.unsw.edu.au/videos/Jeff-Routledge-05November 2015/seminar.php〉. (Accessed 15 March 2017).
27. R. Evans, A. Sugianto, W. Mao, Interpreting module EL images for quality control, in: Conference Proceedings - Solar2014: The 52nd Annual Conference of the Australian Solar Council, 2014.