Interface-engineering additives for inverted BHJ polymer solar cells
Source abstract
Abstract
Abstract We report on the photovoltaic (PV) effect of inverted polymer solar cells (PSCs) with a bulk-heterojunction (BHJ) PV layer consisting of a donor-conjugated polymer of poly(3-hexylthiophene) (P3HT) and an acceptor of [6,6]-phenyl C 61 butyric acid methyl ester (PCBM) mixed with an interface-engineering additive of poly(oxyethylene tridecyl ether) (PTE). The electron-selective layer used is sol–gel processed zinc oxide (ZnO), and the anode layer is silver (Ag). Improved performance was achieved using the PTE additive in the BHJ PV layer of the inverted PSCs. A 1.77 wt% mixing level of PTE into a blended P3HT:PCBM PV layer with a ratio of 1.00:0.73 produces a power conversion efficiency (PCE) of 3.14%, which was much higher than the reference device (2.77%) without PTE. This improvement can be attributed to not only the improved carrier transport due to the PTEs at the interfaces between the BHJ PV layer and the electrodes, but also the increased carrier lifetime due to the PTE molecules at the interfaces between the phase-separated BHJ domains. These results suggest that the BHJ PV layer mixed with the PTE interface-engineering additive is a promising functional composite material system for use in efficient inverted polymer PV cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
2. Polymer photovoltaic cells10.1126/science.270.5243.1789 ↗
3. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗
4. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)
5. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
6. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%
7. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
8. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
9. Recent progress in polymer solar cells10.1002/adma.200802854 ↗
10. Stability of polymer solar cells10.1002/adma.201104187 ↗
11. High-efficiency inverted polymer solar cells with transparent and work-function tunable MoO3–Al composite film as cathode buffer layer10.1002/adma.201200238 ↗
12. Double interfacial layers for highly efficient organic light-emitting devices10.1063/1.2721872 ↗
13. Improved photovoltaic effect of polymer solar cells with nanoscale interfacial layers10.1016/j.solmat.2010.02.045 ↗
14. Surfactant additives for improved photovoltaic effect of polymer solar cells10.1039/c0jm02091e ↗
15. Effects of doping concentration and annealing temperature on properties of highly-oriented Al-doped ZnO films10.1016/j.jcrysgro.2005.10.047 ↗
16. Efficient single-layer polymer light-emitting diodes10.1002/adma.201000317 ↗
17. Reappraising the need for bulk heterojunctions in polymer-fullerene photovoltaics10.1021/jp9050897 ↗
18. Discotic materials for organic solar cells10.1016/j.solmat.2009.11.024 ↗
19. Charge extraction analysis of charge carrier densities in a polythiophene/fullerene solar cell10.1063/1.3006316 ↗
20. Sequestering gold nanorods by polymer microgels
21. Morphology of all-solution-processed “Bilayer” organic solar cells10.1002/adma.201003545 ↗
22. Discriminating between bilayer and bulk heterojunction polymer10.1021/am200755m ↗
23. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
24. Tuning the energy level offset between donor and acceptor with ferroelectric dipole layers for increased efficiency in bilayer organic photovoltaic cells10.1002/adma.201104509 ↗
25. Role of tungsten oxide in inverted polymer solar cells10.1063/1.3076134 ↗
26. Carrier recombination losses in inverted polymer10.1063/1.3561437 ↗
27. Spectroscopy and time-resolved photocurrent response in ordered porphyrin thin films10.1021/j100029a034 ↗
28. Lifetimes of organic photovoltaics10.1016/j.solmat.2005.03.004 ↗