Calibration procedure for solar cells exhibiting slow response and application to a dye-sensitized photovoltaic device
Source abstract
Abstract
Dye-sensitized Solar Cells are generally known to possess a slow response to changes in photocurrent generation by incident light. Electrical power measurements of photovoltaic (PV) devices can only be accurately made if sufficient time is allowed for complete photocurrent generation. The generation time increases from typically a few milliseconds in the case of c-Si devices, over tens to hundreds of milliseconds for technologies like backcontact and hetero-junction solar cells, to even longer times for dye-sensitized and some types of perovskite solar cells. In this work we propose a procedure for calibration of slow responding PV devices based on an accurate evaluation of their response time. Starting from a quantitative analysis of the photocurrent signal versus chopping frequency on the spectral responsivity set-up, the measurement of a dye-sensitized solar cell was performed at 1 Hz chopping frequency. Then current-voltage (I-V) measurements were performed at different sweep-times and directions, in order to determine the correct parameters for I-V characterization. Combining appropriate spectral responsivity (for determination and correction of spectral mismatch) and I-V measurements yielded a reliable calibration of the device including measurement uncertainty estimation. Based on this work criteria for a reliable calibration of slow responding PV devices are formulated, fulfilling all requirements specified in the standards (IEC 60904 series and IEC 60891).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · solar cell performance optimization · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Recent Advances of Dye-Sensitized Solar Cells and Integrated Modules at SHARP10.1557/PROC-1211-R12-02 ↗
3. Solar cell efficiency tables (version 47)10.1002/pip.2728 ↗
4. P.M. Sommeling, H.C. Rieffe, J.M. Kroon, J. A. M. van Roosmalen, A. Schönecker and W.C. Sinke, Spectral response and response time of nanocrystalline dye-sensitized TiO2 solar cells, Proceeding of the 14th EUPVSEC Barcelona, Spain, 1997, pp. 1816–1819.
5. Influence of trap filling on photocurrent transients in polycrystalline TiO210.1063/1.104839 ↗
6. Measurements and evaluation of dye-sensitized solar cell performance10.1016/j.jphotochemrev.2012.08.003 ↗
7. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
8. Spectral responsivity measurements of DSSC devices at low chopping frequency (1Hz)10.1002/pip.2558 ↗
9. IEC 60904-1 (Ed. 2) Photovoltaic devices – Part 1: Measurement of photovoltaic current-voltage characteristics 2006.
10. Y.Hishikawa, M.Yanagida, N.Koide, Performance characterization of the Dye-sensitized Solar Cells, Conference record, in: Proceedings of the 31st IEEE Photovoltaic Specialists Conference Orlando, Florida 67-70, 2005.10.1109/PVSC.2005.1488070 ↗
11. Precise performance characterization of perovskite solar cells10.1016/j.cap.2016.05.002 ↗
12. IEC 60904-8 (Ed. 3) Photovoltaic devices – Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device 2014.
13. IEC 60904-7 (Ed. 3) Photovoltaic devices – Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices 2008.
14. IEC 60904-3 (Ed. 2) Photovoltaic devices – Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data 2008.
15. Spectral mismatch in calibration of photovoltaic reference devices by global sunlight method10.1088/0957-0233/16/6/002 ↗
16. Automated absolute spectral response characterization for calibration of secondary standards
17. Y. Hishikawa, Y. Tsuno, K. Kurokawa, Spectral response measurements of PV modules and multi-junction devices, Proceedings of the 22th EUPVSEC Milano, Italy, 2007, pp. 2765–2769.
18. An alternative method for spectral response measurements of large‐area thin‐film photovoltaic modules
19. IEC 60904-9 (Ed. 2) Photovoltaic devices – Part 9: Solar simulator performance requirements 2007.
20. Analysis and mitigation of measurement uncertainties in the traceability chain for the calibration of photovoltaic devices10.1088/0957-0233/20/7/075101 ↗
21. Characterization of perovskite solar cells: towards a reliable measurement protocol10.1063/1.4960759 ↗
22. Best practices in perovskite solar cell efficiency measurements. Avoiding the error of making bad cells look good10.1021/acs.jpclett.5b00289 ↗