journal article·2011-08

Efficiency enhancement in large-area organic photovoltaic module using theoretical power loss model

Hong-Kun Lyu, Jun Hyoung Sim, Sung-Ho Woo, Kang Pil Kim, Jang-Kyoo Shin, Yoon Soo Han

Publisher page

Abstract

Abstract For efficiency enhancement of a large-area monolithic organic photovoltaic (OPV) module, we studied the influence of the OPV cell geometry parameters using theoretical and experimental methods. For this work, a unit OPV cell as a reference device and four types of monolithic OPV module with different active cell lengths were fabricated together on a glass substrate. The characteristics of the fabricated unit OPV cell were measured and the voltage (Vmp) and current density (Jmp) at the maximum power point were extracted. The parasitic power losses were calculated from the extracted parameters and the material parameters using a theoretical power loss model, taking into consideration the series resistance, contact resistance, and shading (or dead area) losses at the calculated maximum power of the monolithic OPV module. To analyze the influence of OPV cell layout on efficiency of the large-area monolithic OPV module, the power conversion efficiency of the four type monolithic OPV modules with different active cell lengths was measured and compared with the calculated power conversion efficiency. The calculated PCE ratio of the monolithic OPV module with three cells was approximately 78%, and the measured PCE ratio of the fabricated monolithic OPV module with three cells was also approximately 78%. The measured PCE ratio of fabricated monolithic OPV modules with two, four, and five cells also exhibited this tendency for the calculated PCE ratio. Thus, a large-area monolithic OPV module with optimum electrical power loss and an appropriate number of OPV cells can be designed by extracting the parameters of the unit OPV cell and calculating the electrical power loss using the proposed theoretical power loss model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. A low band gap, solution processable oligothiophene with a dialkylated diketopyrrolopyrrole chromophore for use in bulk heterojunction solar cells10.1063/1.3086897 ↗
2. Endohedral fullerenes for organic photovoltaic devices10.1038/nmat2379 ↗
3. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
4. ITO-free wrap through organic solar cells—a module concept for cost-efficient reel-to-reel production10.1016/j.solmat.2006.10.005 ↗
5. Large-area organic photovoltaic module—fabrication and performance10.1016/j.solmat.2008.11.018 ↗
6. Organic solar cell modules for specific applications—from energy autonomous systems to large area photovoltaics10.1016/j.tsf.2007.12.093 ↗
7. The effect of the front contact sheet resistance on solar cell performance10.1016/j.solmat.2009.03.028 ↗
8. Efficiency enhancement in organic photovoltaic cells: consequences of optimizing series resistance10.1002/adfm.200901107 ↗
9. Influence of polymer solar cell geometry on series resistance and device efficiency10.1002/pssa.200925315 ↗
10. A review and comparison of different methods to determine the series resistance of solar cells10.1016/j.solmat.2007.05.026 ↗
11. Extraction of solar cell series resistance without presumed current–voltage functional form10.1016/j.solmat.2009.11.026 ↗
12. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
13. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
14. Low band gap Polymers for roll-to-roll coated polymer solar cells10.1021/ma1015903 ↗
15. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
16. H.-K. Lyu, S. Jeong, J.H. Sim, S.-H. Woo, K.-P. Kim, Y.S. Han, Electrical power loss model for large-area monolithic organic photovoltaic module, Curr. Appl. Phys., accepted for publication, doi:10.1016/j.cap. 2010.11.084.10.1016/j.cap.2010.11.084 ↗