journal article·2021-06

Aging behavior and degradation of different backsheets used in the field under various climates in China

Huili Han, Ji Xia, Hongjie Hu, Rensheng Liu, Jiangfeng Liu, Kaushik Roy Choudhury, William J. Gambogi, Thomas Felder, Marisol Rodriguez, Ethan Simon, Zongwen Zhang, Hui Shen

Publisher page

Abstract

Abstract The performance of photovoltaic (PV) modules and their component materials under outdoor environmental stresses is the most important indicator of reliability, durability, and safety of PV modules throughout their service life. In this study, fielded modules with polyamide-based back-sheets (PA/PA/PA) and Tedlar PVF-based backsheets (PVF/PET/PVF) (TPT) from arid and subtropical climates in China were collected for comparison analysis. PA and PVF back-sheet samples were removed from the fielded modules. The weatherability of the airside layer of two different types of photovoltaic back-sheets has been compared and studied. Chemical composition, mechanical performance, surface morphology and optical discoloration of these back-sheet samples were evaluated to understand the degradation of back-sheet materials in fielded modules. By a series of measurements, significant differences were found in the durability between them.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Photovoltaic Systems and Sustainability · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Moisture transport, adhesion, and corrosion protection of PV module packaging materials10.1016/j.solmat.2006.04.003 ↗
2. Aging mechanisms of polymeric films for PV encapsulation10.1016/j.solener.2005.02.008 ↗
3. Structure and basic properties of photovoltaic module backsheet films10.1016/j.solmat.2015.09.060 ↗
4. Comparison of different technologies for solar PV (Photovoltaic) outdoor performance using indoor accelerated aging tests for long term reliability10.1016/j.energy.2016.04.054 ↗
5. Analysis of the degradation of monocrystalline silicon photovoltaic modules after long-term exposure for 18 Years in a hot–humid climate in China
6. Quantitative analysis of relationship between leakage current and power loss of multi-crystalline silicon photovoltaic module during potential-induced degradation test10.7567/JJAP.56.122301 ↗
7. Measuring temperature-dependent water vapor and gas permeation through high barrier films10.1063/1.3250866 ↗
8. Study on the degradation of different types of backsheets used in PV module under accelerated conditions10.1016/j.solmat.2013.09.036 ↗
9. Degradation of mono-crystalline photovoltaic modules after 22 years of outdoor exposure in the composite climate of India10.1016/j.solener.2016.06.047 ↗
10. Reflection and durability study of different types of backsheets and their impact on c-Si PV module performance10.1016/j.solmat.2015.11.038 ↗
11. Fault detection and monitoring systems for photovoltaic installations: a review10.1016/j.rser.2017.09.101 ↗
12. Dissolution of ethylene vinyl acetate in crystalline silicon PV modules using ultrasonic irradiation and organic solvent10.1016/j.solmat.2011.11.022 ↗
13. Degradation analysis of 28 year field exposed mono-c-Si photovoltaic modules of a direct coupled solar water pumping system in western Himalayan region of India10.1016/j.renene.2015.01.015 ↗
14. Correlation study of damp heat and pressure cooker testing on backsheets10.1002/app.44230 ↗
15. Relation gloss loss to topographical feature of a PVDF coating10.1007/s11998-006-0003-8 ↗
16. Non-destructive degradation analysis of encapsulants in PV modules by Raman Spectroscopy10.1016/j.solmat.2011.01.030 ↗
17. Degradation and cracking behavior of polyamide-based backsheet subjected to sequential fragmentation test
18. Ultra-violet degradation behavior of polymeric backsheets for photovoltaic modules10.1016/j.solener.2014.06.027 ↗
19. Nondestructive estimation of strength deterioration in photovoltaic backsheets using a portable near infrared spectrometer10.1016/j.solmat.2012.01.017 ↗
20. Error analysis of aged modules with cracked polyamide backsheets
21. Aging of polyamide film materials in response to the combined action of environmental factor-raised temperature and moist air
22. Photochemistry of aliphatic polyamides 4. Mechanisms of photooxidation of polyamides 6, 11, and 12 at long wavelengths10.1021/ma00157a015 ↗
23. Impact of permeation properties and backsheet/encapsulant interaction on the reliability of PV moduels
24. Properties of polyvinylidene fluoride. Part 11. Infrared transmission of normal and thermally decomposed polymer10.1002/pol.1961.1205516213 ↗
25. A comparison of key PV backsheet and module performance from fielded module exposures and accelerated tests10.1109/JPHOTOV.2014.2305472 ↗