UV-ozone induced surface passivation to enhance the performance of Cu2ZnSnS4 solar cells
Source abstract
Abstract
Interface property has been considered one of the most critical factors affecting the performance of semiconductor devices. In this work, we demonstrate an efficient surface passivation for the interface between Cu2ZnSnS4 (CZTS) and CdS buffer layer by using UV-ozone treatment at room temperature. The passivation led to a significant enhancement of short circuit current density (Jsc) of the device from 11.70 mA/cm2 to 18.34 mA/cm2 and thus efficiency of the CZTS solar cells from 3.18% to 5.55%. The study of surface chemistry has revealed that the UV-ozone exposure led to formation of a Sn–O rich surface on CZTS, which passivates the dangling bonds and forms an ultra-thin energy barrier layer at the interface of CZTS/CdS. The barrier is considered to be responsible for the reduction of non-radiative recombination loss in the solar cells as confirmed by photoluminescence (PL) measurement. The elongated lifetime of minority carriers in the CZTS solar cells by time-resolved PL has further verified the interface passivation effect induced by UV-ozone treatment. This work provides a fast, simple yet very effective approach for surface passivation of CZTS film to boost the performance of CZTS solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Cation substitution in earth-abundant kesterite photovoltaic materials10.1002/advs.201700744 ↗
2. Interfaces of high-efficiency kesterite Cu2ZnSnS(e)4 thin film solar cells10.1088/1674-1056/27/1/018803 ↗
3. Analysis for efficiency potential of high-efficiency and next-generation solar cells10.1002/pip.2955 ↗
4. Progress in thin film solar cells based on Cu2ZnSnS410.1155/2011/801292 ↗
5. High voltage, please!10.1038/s41560-017-0031-x ↗
6. Critical review on sputter-deposited Cu2ZnSnS4 (CZTS) based thin film photovoltaic technology focusing on device architecture and absorber quality on the solar cells performance10.1016/j.solmat.2017.05.064 ↗
7. Determining and controlling the stoichiometry of Cu2ZnSnS4 photovoltaics: the physics and its implications10.1021/acs.chemmater.6b01612 ↗
8. The current status and future prospects of kesterite solar cells: a brief review10.1002/pip.2741 ↗
9. Strategic review of interface carrier recombination in earth abundant Cu–Zn–Sn–S-Se solar cells: current challenges and future prospects10.1039/C6TA10543B ↗
10. Solar cell efficiency tables (version 52)10.1002/pip.3040 ↗
11. Defect formation and phase stability of Cu2ZnSnS4 photovoltaic material10.1103/PhysRevB.81.113202 ↗
12. Intrinsic point defects and complexes in the quaternary kesterite semiconductorCu2ZnSnS410.1103/PhysRevB.81.245204 ↗
13. Development of a selective chemical etch to improve the conversion efficiency of Zn-rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
14. KCN chemical etch for interface engineering in Cu2ZnSnSe4 solar cells10.1021/acsami.5b02122 ↗
15. Interplay between surface preparation and device performance in CZTSSe solar cells: effects of KCN and NH4OH etching10.1016/j.solmat.2015.01.006 ↗
16. Optical and surface probe investigation of secondary phases in Cu2ZnSnS4 films grown by electrochemical deposition10.1016/j.solmat.2015.03.003 ↗
17. Facile, noncyanide based etching of spray deposited Cu2ZnSnS4 thin films for secondary phase removal10.1021/acssuschemeng.5b01746 ↗
18. Evolution of Na-S(-O) compounds on the Cu2ZnSnS4 absorber surface and their effects on CdS thin film growth10.1021/acsami.6b04978 ↗
19. Atomic-scale observation of oxygen substitution and its correlation with hole-transport barriers in Cu2ZnSnSe4 thin-film solar cells10.1002/aenm.201501902 ↗
20. Nanoscale microstructure and chemistry of Cu2ZnSnS4/CdS interface in kesterite Cu2ZnSnS4 solar cells10.1002/aenm.201600706 ↗
21. A low-temperature order-disorder transition in Cu2ZnSnS4 thin films10.1063/1.4863685 ↗
22. Is the Cu/Zn disorder the main culprit for the voltage deficit in kesterite solar cells?10.1002/aenm.201502276 ↗
23. Thermal effect on CZTS solar cells in different process of ZnO/ITO window layer fabrication
24. Effect of different thermo-treatment at relatively low temperatures on the properties of indium tin-oxide thin films10.1016/j.tsf.2017.07.022 ↗
25. Low-temperature UV ozone-treated high efficiency radial p-n junction solar cells: N-Si NW arrays embedded in a p-Si matrix10.1016/j.nanoen.2014.10.028 ↗
26. Simple and versatile UV-ozone oxide for silicon solar cell applications10.1016/j.solmat.2018.06.006 ↗
27. Enhanced performance of perovskite solar cells by ultraviolet-ozone treatment of mesoporous TiO210.1016/j.apsusc.2017.12.085 ↗
28. Octadecylamine-functionalized single-walled carbon nanotubes for facilitating the formation of a monolithic perovskite layer and stable solar cells10.1002/adfm.201705545 ↗
29. A precursor stacking strategy to boost open-circuit voltage of Cu2ZnSnS4 thin-film solar cells10.1109/JPHOTOV.2018.2813264 ↗
30. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
31. Carbon concentration dependent grain growth of Cu2ZnSnS4 thin films10.1039/C4RA16447D ↗
32. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
33. On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks10.1016/j.solmat.2013.01.015 ↗
34. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
35. Incorporation of alkali metals in chalcogenide solar cells10.1016/j.solmat.2015.06.011 ↗
36. Synthesis of porous ZnS, ZnO and ZnS/ZnO nanosheets and their photocatalytic properties10.1039/C7RA03243A ↗
37. Efficiency enhancement of kesterite Cu2ZnSnS4 solar cells via solution-processed ultrathin tin oxide intermediate layer at absorber/buffer interface10.1021/acsaem.7b00044 ↗
38. What is the band alignment of Cu2ZnSn(S,Se)4 solar cells?10.1016/j.solmat.2017.05.008 ↗
39. Cliff-like conduction band offset and KCN-induced recombination barrier enhancement at the CdS/Cu2ZnSnS4 thin-film solar cell heterojunction10.1063/1.3663327 ↗
40. Impact of minor phases on the performances of CZTSSe thin-film solar cells10.1021/acs.chemmater.6b00069 ↗
41. The effect of ZnS segregation on Zn-rich CZTS thin film solar cells10.1016/j.jallcom.2015.01.205 ↗
42. Characterisation and modelling of chalcopyrite solar cells10.1016/S0040-6090(00)01736-3 ↗
43. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
44. Enhancement of open-circuit voltage of solution-processed Cu2ZnSnS4 solar cells with 7.2% efficiency by incorporation of silver10.1021/acsenergylett.6b00509 ↗
45. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
46. Atomic layer deposited aluminum oxide for interface passivation of Cu2ZnSn(S,Se)4 thin-film solar cells10.1002/aenm.201600198 ↗
47. Long lifetimes in high-efficiency Cu(In,Ga)Se2 solar cells10.1063/1.2957983 ↗
48. Time-resolved photoluminescence in Cu(In,Ga)Se2 thin films and solar cells10.1016/j.tsf.2006.12.040 ↗
49. Tabulated values of the Shockley–Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗