Copolymerisation as a way to enhance the electrochromic properties of an alkylthiophene oligomer and a pyrrole derivative: copolymer of 3,3′″ dihexyl-2,2′:5′,2″:5″,2′″-quaterthiophene with (R)-(-)-3-(1-pyrrolyl)propyl-N-(3,5-dinitrobenzoyl)-α-phenylglycinate
Source abstract
Abstract
The copolymerisation of 3,3'" Dihexyl-2,2':5',2":5",2'"-quaterthiophene (DHQT) and (R)-(-)-3-(1-pyrrolyl)propyl-N-(3,5-dinitrobenzoyl)-α-phenylglycinate (DNBP) was successfully performed electrochemically in acetonitrile (CH3CN) containing tetrabutylammonium tetrafluoroborate ((C4H9)4NBF4) by direct oxidation of monomer mixtures in different feed ratios. Copolymerisation improved the properties of the films of both polymers PDHQT and PDNBP, in respect to the adhesion of PDHQT onto ITO/glass surface and the chromatic contrast of these electrochromic materials. PDHQT, PDNBP and P(DHQT-co-DNBP) films were characterised by FTIR spectroscopy, fluorescence spectroscopy, Scanning Electron Microscopy (SEM) and spectroelectrochemical techniques. Solutions of PDHQT and its copolymers with DNBP (independently of the feed ratio) in N-methylpyrrolidone are fluorescent with emission bands at 555 and 585 nm when excited at 375 nm. Reversible changes in the hue and saturation occur in all the copolymer films from yellow or orange in the reduced state to green or blue in the oxidised state, but were dependent on the proportion of the comonomers used to prepare the copolymers. These changes are more significant for P(DHQT-co-DNBP) films deposited onto ITO/glass with 1:5 feed ratio, as shown by the track of the CIE 1931 xy chromaticity coordinates and by the electrochromic parameters in which this film (thickness 0.8±0.2 μm) presented chromatic contrast (Δ%T) at 660 nm of 62%, coloration efficiency (η) of 266 cm2 C-1 and stability to redox cycling (Δ%T=17% at the 1000th cycle). Therefore, these copolymers are potentially applicable in displays and optoelectronic devices as electrochromic and fluorescent materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Transition Metal Oxide Nanomaterials · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Organic electrochromic materials10.1016/S0013-4686(99)00046-8 ↗
2. Monk · 1995
3. Enhanced contrast dual polymer electrochromic devices10.1021/cm020050y ↗
4. In situ colorimetric analysis of electrochromic polymers and devices10.1021/cm000097o ↗
5. A multiswitchable poly(terthiophene) bearing a spiropyran functionality: understanding photo- and electrochemical control10.1021/ja1114634 ↗
6. Synthetic principles for band gap control in linear π-conjugated systems10.1021/cr950257t ↗
7. Color control in π-conjugated organic polymers for use in electrochromic devices10.1021/cr900129a ↗
8. Copolymers – a refined way to tailor intrinsically conducting polymers10.1016/j.electacta.2011.04.013 ↗
9. Thiophene: alkylthiophene copolymers from substituted dialkyl oligothiophenes10.1021/cm00058a019 ↗
10. Regiodefined substituted poly(2,5-thienylene)s10.1002/pola.1993.080311322 ↗
11. Towards functionalized poly(terthiophenes): regioselective synthesis of oligoether-substituted bis(styryl)sexithiophenes10.1039/b502791h ↗
12. Functional oligothiophenes: molecular design for multidimensional nanoarchitectures and their applications10.1021/cr8004229 ↗
13. High performance organic semiconductors for field-effect transistors10.1039/c0cc00947d ↗
14. Quatertiophene-based dimers containing an ethylene bridge: molecular design, synthesis, and optoelectronic properties10.1016/j.tet.2011.10.020 ↗
15. Alternating copolymers of thiadiazole and quaterthiophenes – synthesis, electrochemical and spectroelectrochemical characterization10.1016/j.electacta.2013.07.209 ↗
16. Effect of end-substitution of hexyl chains on the growth and electrical properties of quaterthiophene thin films10.1016/S0169-4332(03)00375-1 ↗
17. Ambipolar field-effect transistor based on α, ω-dihexylquaterthiophene and α, ω-diperfluoroquaterthiophene vertical heterojunction10.1016/j.microrel.2010.07.047 ↗
18. Solution-processable oligothiophenes with solubilizing β-alkyl groups for organic photovoltaic cells10.1016/j.solmat.2012.07.005 ↗
19. Synthesis and electrochromic properties of oligothiophene derivatives10.1016/j.synthmet.2009.11.025 ↗
20. Control of growth and charge transport properties of quaterthiophene thin films via hexyl chain substitutions10.1016/j.orgel.2003.12.006 ↗
21. New photoactive oligo- and poly-alkylthiophenes10.1016/j.polymer.2008.09.013 ↗
22. Symmetrical alkyl-substituted oligothiophenes as ligands: complexation of the [(η-C5H5)Ru]+ moiety by hexyl-substituted ter- quater- and quinque-thiophenes10.1039/a809623f ↗
23. A novel multielectrochromic copolymer based on 1-(4-nitrophenyl)-2,5-di(2-thienyl)-1H-pyrrole and EDOT10.1016/j.jelechem.2007.02.002 ↗
24. Enhancing electrochromic properties of conducting polymers via copolymerization: copolymer of 1-(4-fluorophenyl)-2,5-di(thiophen-2-yl)-1H-pyrrole with 3,4-ethylene dioxythiophene10.1002/pola.22166 ↗
25. Electrosynthesis and characterizations of a new soluble conducting copolymer of 5-cyanoindole and 3,4-ethylenedioxythiophene10.1016/j.electacta.2008.06.058 ↗
26. Electrochromism of dinitrobenzoyl-derivatised polypyrrole films deposited on ITO/glass electrodes10.1016/j.electacta.2006.01.028 ↗
27. Dual-type electrochromic device based on polypyrrole and polythiophene derivatives10.1016/j.solmat.2011.03.032 ↗
28. A multielectrochromic copolymer based on pyrrole and thiophene derivatives10.1016/j.solmat.2012.03.024 ↗
29. Synthesis of (R)-(−) and (S)-(+)-3-(1-pyrrolyl)propyl-N-(3,5-dinitrobenzoyl)-α-phenylglycinate and derivatives
30. Recommendations on reporting electrode potentials in nonaqueous solvents10.1351/pac198456040461 ↗
31. Characterisation of the topography and surface potential of electrodeposited conducting polymer films using atomic force and electric force microscopies10.1016/S0013-4686(00)00627-7 ↗
32. Electrochemical and morphological characterization of poly[(R)-(-)-3-(l-pyrrolyl)propyl-N-(3,5-dinitrobenzoyl)-α-phenylglycinate] films deposited on ITO electrodes10.1016/j.jelechem.2005.04.001 ↗
33. Wyszecki · 1982
34. Quantification of colour stimuli through the calculation of CIE chromaticity coordinates and luminance data for application to in situ colorimetry studies of electrochromic materials10.1016/j.displa.2010.10.001 ↗
35. In situ spectroelectrochemistry and colour measurement of a complementary electrochromic device based on surface-confined prussian blue and aqueous solution-phase methyl viologen10.1016/j.solmat.2011.11.052 ↗
36. Influence of the film thickness and morphology on the colorimetric properties of spray-coated electrochromic disubstituted 3,4-Propylenedioxythiophene polymers10.1021/am900431z ↗
37. Santa-Cruz · 2003
38. Electrochemical synthesis of a copolymer of poly(3-octylthiophene) and poly(paraphenylene)10.1016/S0013-4686(98)00302-8 ↗
39. The electrochemical copolymerization of pyrrole and furan in a novel binary solvent system10.1016/S0022-0728(99)00205-3 ↗
40. Copolymerization of pyrrole and thiophene by electrochemical oxidation and electrochemical behavior of the resulting copolymers10.1149/1.2096098 ↗
41. Conducting polymers from anodic coupling of some regiochemically defined dialkoxy-substituted thiophene oligomers10.1016/0379-6779(95)80019-0 ↗
42. Synthesis and characterization of porphyrin-terthiophene and oligothiophene p-conjugated copolymers for polymer solar cells10.1016/j.eurpolymj.2010.01.015 ↗
43. Reaction analysis of 3,4-ethylenedioxythiophene with potassium persulfate in aqueous solution by using a calorimeter10.1016/S0032-3861(99)00670-9 ↗
44. Building blocks for n-type molecular and polymeric electronics. Perfluoroalkyl- versus alkyl-functionalized oligothiophenes (nTs; n=2-6). Systematic synthesis, spectroscopy, electrochemistry, and solid-state organization10.1021/ja0489846 ↗
45. Solvent dependence of the charge-transfer properties of a quaterthiophene-anthraquinone dyad10.1016/j.jphotochem.2008.01.016 ↗
46. Quaterthiophene-based dimers containing an ethylene bridge: molecular design, synthesis and optoelectronic properties10.1016/j.tet.2011.10.020 ↗
47. Electrosyntheses and characterization of a fluorescent conducting polymer of benzanthrone and thiophene10.1007/s10118-010-9141-7 ↗
48. Facile electrosynthesis of poly (pyrene-1-sulfonic acid sodium salt) film: a good candidate for blue light-emitting diodes applications10.1016/j.matlet.2011.01.066 ↗
49. Facile electrosynthesis of nitro-group-substituted oligopyrene with bicolored emission10.1016/j.electacta.2008.07.075 ↗
50. Characterization by atomic force microscopy of electrodeposited films of polypyrrole dinitrobenzoyl-derivative10.1017/S143192760505110X ↗
51. Electrochemical preparation of conducting poly(3-methylthiophene): comparison with polythiophene and poly (3-ethylthiophene)10.1016/0379-6779(86)90041-X ↗
52. Charge storage in doped poly(thiophene): optical and electrochemical studies10.1103/PhysRevB.30.702 ↗
53. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
54. Electrochemical and optical studies of conjugated polymers for three primary colours
55. A fast switching, low band gap, p- and n- dopable, donor-acceptor type polymer10.1016/j.jelechem.2007.11.035 ↗
56. Electrochemical and spectroelectrochemical comparison of alternated monomers and their copolymers based on carbazole and thiophene derivatives10.1016/j.electacta.2013.11.167 ↗