journal article·2010-03

Enhanced performance of hybrid photovoltaic devices via surface-modifying metal oxides with conjugated polymer

Hongwei Geng, Mingtai Wang, Shikui Han, Ruixiang Peng

Publisher page

Abstract

Abstract In this paper, TiO2 nanorods surface was functionalized with poly(1-methoxy-4-(2-ethylhexyloxy)-p-phenylenevinylene) (MEH-PPV), offering a hybrid nanocomposite (MEH-PPV–TiO2 NRs) that was directly applied for the preparation of active layer in hybrids photovoltaic devices. Fourier-transform infrared (FT-IR), transmission electron microscopy (TEM) and photophysical properties verified that the intimately contact between the polymer chains and TiO2 nanorods, by removing the surfactants originally on the TiO2 nanorod surfaces. The performance of the MEH-PPV–TiO2 NRs photovoltaic devices was investigated by current–voltage (J–V) characteristics and intensity modulated photovoltage spectroscopy (IMVS), in comparison to the device based on the blend (MEH-PPV/TiO2 NRs) that was prepared by a conventional mixing process. Results showed that the device performance of the MEH-PPV–TiO2 NRs composite was greatly enhanced, and the power conversion efficiency under monochromic illumination (470 nm, 15.8 mW/cm2) was improved by –30% with respect to the device based on the MEH-PPV/TiO2 NRs counterpart, giving an optimized device performance of a short-circuit current density of 0.45 mA/cm2, an open-circuit voltage of 0.65 V and a power conversion efficiency of 0.10% under simulated AM1.5 illumination (100 mW/cm2). It was also demonstrated that there was a suitable concentration (ca. 17 mg/mL) of the hybrid dispersion for the fabrication of effective devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Organic photovoltaics — Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
2. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
3. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
4. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
5. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
6. Small bandgap polymers for organic solar cells (polymer material development in the last 5 years)10.1080/15583720802231833 ↗
7. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
8. Patterns of efficiency and degradation of composite polymer solar cells10.1016/j.solmat.2004.02.028 ↗
9. Lifetimes of organic photovoltaics: photochemistry, atmosphere effects and barrier layers in ITO-MEHPPV:PCBM-aluminium devices10.1016/j.solmat.2004.09.002 ↗
10. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
11. Lifetimes of organic photovoltaics: using TOF-SIMS and 18O2 isotopic labelling to characterise chemical degradation mechanisms10.1016/j.solmat.2005.03.004 ↗
12. Hybrid solar cells based on MEH-PPV and thin film semiconductor oxides (TiO2, Nb2O5, ZnO, CeO2 and CeO2–TiO2): Performance improvement during long-time irradiation10.1016/j.solmat.2006.02.007 ↗
13. Out-door testing and long-term stability of plastic solar cells10.1051/epjap:2006159 ↗
14. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
15. Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
16. Bulk heterojunctions based on native polythiophene10.1021/cm800431s ↗
17. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
18. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating10.1016/j.solmat.2008.12.012 ↗
19. A roll-to-roll process to flexible polymer solar cells: model studies
20. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
21. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
22. Hybrid polymer-metal oxide thin films for photovoltaic applications10.1039/b706547g ↗
23. Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer10.1002/adma.200306659 ↗
24. Hybrid solar cells from regioregular polythiophene and ZnO nanoparticles10.1002/adfm.200500573 ↗
25. Nanoparticle-polymer photovoltaic cells10.1016/j.cis.2007.09.001 ↗
26. Influence of solvent on film morphology and device performance of poly(3-hexylthiophene):TiO2 nanocomposite solar cells10.1016/j.cplett.2003.12.045 ↗
27. Evaporation-induced self-assembly of nanoparticles from a sphere-on-flat geometry10.1002/anie.200604540 ↗
28. Improved charge separation and transport efficiency in poly(3-hexylthiophene)–TiO2 nanorod bulk heterojunction solar cells10.1039/b800071a ↗
29. Infiltrating semiconducting polymers into self-assembled mesoporous titania films for photovoltaic applications10.1002/adfm.200304361 ↗
30. Visible light sensitisation of titanium dioxide using a phenylene vinylene polymer10.1016/S0009-2614(98)00163-8 ↗
31. Interfacial nanostructuring on the performance of polymer/TiO2 nanorod bulk heterojunction solar cells10.1021/ja8079143 ↗
32. Surface ligand effects in MEH–PPV/TiO2 hybrid solar cells10.1016/j.solmat.2008.05.017 ↗
33. MEH-PPV: improved synthetic procedure and molecular weight control10.1021/ma991521d ↗
34. Low-temperature synthesis of soluble and processable organic-capped anatase TiO2 nanorods10.1021/ja036505h ↗
35. Correlation between the vibrational frequencies of the carboxylate group and the types of its coordination to a metal ion: an ab initio molecular orbital study10.1021/jp9615924 ↗
36. Diffuse reflectance infrared Fourier transform spectroscopic studies of the adsorption of oleate/oleic acid onto zirconia10.1021/la9603939 ↗
37. Aging of a donor conjugated polymer: photochemical studies of the degradation of poly 2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylenevinylene10.1002/pola.21815 ↗
38. Role of aggregation in the amplified spontaneous emission of [2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] in solution and films10.1016/j.jlumin.2005.08.012 ↗
39. Organic–inorganic nanocomposites via directly grafting conjugated polymers onto quantum dots10.1021/ja074133x ↗
40. Observation of solvatochromism in CdSe colloidal quantum dots10.1103/PhysRevB.63.165315 ↗
41. Photoluminescence of poly(p-phenylenevinylene)-silica nanocomposites: evidence for dual emission by Franck–Condon analysis10.1063/1.1372508 ↗
42. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗
43. Chain organization and photophysics of conjugated polymer in poor solvents: aggregates, agglomerates and collapsed coils10.1016/j.polymer.2006.12.003 ↗
44. Exciton dissociation and migration in enhanced order conjugated polymer/nanoparticle hybrid materials10.1088/0957-4484/17/5/017 ↗
45. Ultrathin films of poly(ethylene oxides) on oxidized silicon. 2. In situ study of crystallization and melting by hot stage AFM10.1021/ma020686a ↗
46. Observation of enhanced energy transfer in individual quantum dot-oligophenylene vinylene nanostructures10.1021/ja058429j ↗
47. Hybrid organic–inorganic nanomaterials based on polythiophene dendronized nanoparticles10.1039/B517601H ↗
48. Band edge movement and recombination kinetics in dye-sensitized nanocrystalline TiO2 solar cells: a study by intensity modulated photovoltage spectroscopy10.1021/jp9714126 ↗
49. Charge transport and back reaction in solid-state dye-sensitized solar cells: a study using intensity-modulated photovoltage and photocurrent spectroscopy10.1021/jp0348777 ↗
50. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
51. Photonic crystal geometry for organic solar cells10.1021/nl901232p ↗
52. Efficiency enhancements in solid-state hybrid solar cells via reduced charge recombination and increased light capture10.1021/nl071656u ↗
53. High open-circuit voltage solid-state dye-sensitized solar cells with organic dye10.1021/nl901246g ↗
54. A large interconnecting network within hybrid MEH-PPV/TiO2 nanorod photovoltaic devices10.1088/0957-4484/17/21/017 ↗