journal article·2016-01

A study for degradation of flexible organic photovoltaic modules via damp-heat test: By accessing individual layers of the module

Sung Hyun Kim, Hyoung Jin Son, Sung Hwak Park, Jung Seok Hahn, Dong Hwan Kim

Publisher page

Abstract

Abstract The stability of slot-die coated flexible organic photovoltaic (OPV) modules with inverted structures of indium tin oxide (ITO)/ZnO/photoactive layer/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/Ag was analyzed under damp heat conditions. The work primarily focused on the understanding of the degradation mechanism of organic photovoltaic modules in very severe operating conditions (85 °C/85% relative humidity [rh]). The electrical change of the OPV module was measured as a function of the aging time under damp heat. A rapid drop in the efficiency of the module was observed, mainly caused by the decline of the open-circuit voltage (Voc) and fill factor (FF). We supposed that the degradation of the modules mainly progressed by the oxygen and moisture penetrating the terminals or at the edges of the barrier films. The physical modification of the layers composing the device by degradation was observed; hence, morphological and chemical analyses were conducted. The analyses revealed that Ag atoms migrated to the interlayers of the cell, resulting in the increase of shunt paths; this was the main reason underlying the reduction of Voc and FF of the OPV module under damp heat. The ZnO layer was also etched by the acidic molecules from the diffused PEDOT:PSS polymer. In addition, the performance parameters of several OPV modules were evaluated simultaneously under damp heat conditions for 1000 h. The same lifetime patterns were observed although the initial efficiencies of the modules were diverse. The interpretation of the lifetime patterns and a suggestion for an objective comparison between the modules showing different initial efficiencies were also addressed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
2. Bulk hetero junction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
3. Research progress on polymer hetero junction solar cells10.1016/j.solmat.2011.10.003 ↗
4. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
5. Performance analysis of printed bulk heterojunctions solar cells10.1002/adfm.200500581 ↗
6. Stability of polymer solar cells10.1002/adma.201104187 ↗
7. Photochemical stability of π-conjugated polymers for polymer solar cells : a rule of thumb10.1039/c0jm03105d ↗
8. Morphology and thermal stability of the active layer in poly(p-phenylenevinylene)/methano-fullerene plastic photovoltaic devices10.1021/ma035620+ ↗
9. Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: Stability over 10,000h10.1016/j.solmat.2013.04.024 ↗
10. , Semitransparent OPV modules pass environmental chamber test requirements10.1016/j.solmat.2012.09.031 ↗
11. Promising long-term stability of encapsulated ITO-free bulk-heterojunction organic solar cells under different aging conditions10.1016/j.solmat.2014.07.004 ↗
12. Outdoor operational stability of indium-free flexible polymer solar modules over 1 year studied in India, Holland, and Denmark
13. Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules10.1016/j.orgel.2012.12.033 ↗
14. Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules10.1016/j.solmat.2011.09.064 ↗
15. Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration10.1039/c2ee03508a ↗
16. Accelerated lifetime measurements of P3HT:PCBM solar cells10.1016/j.synthmet.2005.06.016 ↗
17. Promising long-term stability of encapsulated ITO-free bulk-heterojunction organic solar cells under different aging conditions10.1016/j.solmat.2014.07.004 ↗
18. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
19. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
20. Room-temperature indium-free Ga:ZnO/Ag/Ga:ZnO multilayer electrode for organic solar cell applications10.1149/1.3149537 ↗
21. Thermal degradation mechanisms of PEDOT:PSS10.1016/j.orgel.2008.10.008 ↗
22. Photoelectron spectroscopy of thin films of PEDOT–PSS conjugated polymer blend: a mini-review and some new results10.1016/S0368-2048(01)00323-1 ↗
23. Quality control of roll-to-roll processed polymer solar modules by complementary imaging methods10.1016/j.solmat.2011.10.005 ↗
24. The impact of water vapor transmission rate on the lifetime of flexible polymer solar cells10.1063/1.2975185 ↗