journal article·2015-07Open access

The effect of mesomorphology upon the performance of nanoparticulate organic photovoltaic devices

Henrik F. Dam, Natalie P. Holmes, Thomas R. Andersen, Thue T. Larsen-Olsen, Matthew Barr, A.L. David Kilcoyne, Xiaojing Zhou, Paul C. Dastoor, Frederik C. Krebs, Warwick J. Belcher

Abstract

Abstract Scanning transmission X-ray microscopy (STXM) compositional mapping has been used to probe the mesomorphology of nanoparticles (NPs) synthesized from two very different polymer:fullerene blends: poly(3-hexylthiophene) (P3HT): phenyl-C61-butyric acid methyl ester (PCBM) and poly[4,8-bis(2-ethylhexyloxy)benzo(1,2-b:4,5-b′)dithiophene-alt-5, 6-bis(octyloxy)-4,7-di(thiophen-2-yl)(2,1,3-benzothiadiazole)-5,5′-diyl] (PSBTBT): PCBM. The STXM data shows that both blends form core–shell NP structures with similar shell compositions, but with different polymer:fullerene ratios in the core regions. P3HT:PCBM and PSBTBT:PCBM NP organic photovoltaic (OPV) devices have been fabricated and exhibit similar device efficiencies, despite the PSBTBT being a much higher performing low band gap material. By comparing the measured NP shell and core compositions with the optimized bulk hetero-junction (BHJ) compositions, we show that the relatively higher performance of the P3HT:PCBM NP device arises from the fact that its shell composition is much closer to the optimal BHJ value than that of the PSBTBT:PCBM NP device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Potential health effects of occupational chlorinated solvent exposure10.1196/annals.1371.050 ↗
2. Research recommendations for selected IARC-classified agents10.1289/ehp.0901828 ↗
3. Scanning transmission x-ray microscopy of polymer nanoparticles: probing morphology on sub-10nm length scales10.1088/0957-4484/22/26/265710 ↗
4. Nano-domain behaviour in P3HT:PCBM nanoparticles, relating material properties to morphological changes10.1016/j.solmat.2013.06.003 ↗
5. Novel low voltage and solution processable organic thin film transistors based on water dispersed polymer semiconductor nanoparticulates10.1016/j.jcis.2013.03.052 ↗
6. Inkjet printed surface cell light-emitting devices from a water-based polymer dispersion10.1016/j.orgel.2007.10.007 ↗
7. A multilayered approach to polyfluorene water-based organic photovoltaics10.1016/j.solmat.2012.03.016 ↗
8. Roll-to-roll processed polymer tandem solar cells partially processed from water10.1016/j.solmat.2011.08.025 ↗
9. Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods10.1021/nn200933r ↗
10. Simultaneous multilayer formation of the polymer solar cell stack using roll-to-roll double slot-die coating from water10.1016/j.solmat.2011.08.026 ↗
11. The role of miscibility in polymer:fullerene nanoparticulate organic photovoltaic devices10.1016/j.nanoen.2013.03.009 ↗
12. Structural complexities in the active layers of organic electronics10.1146/annurev-chembioeng-073009-100851 ↗
13. On the morphology of polymer-based photovoltaics10.1002/polb.23063 ↗
14. P3HT:PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
15. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
16. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
17. Highly efficient tandem polymer photovoltaic cells10.1002/adma.200901624 ↗
18. Design of the solution-processed intermediate layer by engineering for inverted organic multi junction solar cells10.1002/aenm.201200659 ↗
19. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene
20. Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells10.1002/adfm.200400521 ↗
21. Influence of the bridging atom on the performance of a low-bandgap bulk heterojunction solar cell10.1002/adma.200900529 ↗
22. Nanomorphology and charge generation in bulk heterojunctions based on low-bandgap dithiophene polymers with different bridging atoms10.1002/adfm.200900931 ↗
23. Morphological characterization of a low-bandgap crystalline polymer:PCBM bulk heterojunction solar cells10.1002/aenm.201100128 ↗
24. Electrochemical control of surface wettability of poly(3-alkylthiophenes)10.1016/j.susc.2006.03.039 ↗
25. Determining the structural motif of P3HT:PCBM nanoparticulate organic photovoltaic devices10.1016/j.solmat.2012.11.015 ↗
26. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
27. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
28. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C[sub 61] blends10.1063/1.2006986 ↗
29. Binary organic photovoltaic blends: a simple rationale for optimum compositions10.1002/adma.200800963 ↗
30. Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites10.1088/0957-4484/15/9/035 ↗
31. Vertical stratification and interfacial structure in P3HT:PCBM organic solar cells10.1021/jp104695j ↗
32. Polymer crystallization of partially miscible polythiophene/fullerene mixtures controls morphology10.1021/ma200855r ↗
33. All solution processed tandem polymer solar cells based on thermocleavable materials10.1016/j.solmat.2008.05.005 ↗