journal article·2013-08

Role of zinc oxide thickness on the photovoltaic performance of laminated organic bulk-heterojunction solar cells

Anirudh Sharma, Mihail Ionescu, Gunther G. Andersson, David A. Lewis

Publisher page

Abstract

Abstract A comprehensive study of zinc oxide (ZnO) film thickness and morphology on the electronic properties of inverted cells is reported. The complete conversion of zinc acetate precursor to 3–5 nm particles of ZnO with no residual acetate is obtained after 10 min at 300 °C. The work-function determined by Ultraviolet Photoelectron Spectroscopy (UPS) was 4.3 eV. and is independent of the thickness of the ZnO layer or with the planarization of the ITO surface topology. However, the efficiency varies from 0.6% to 1.7% as the ZnO thickness varies from 17 nm to 28 nm (assuming full density for the ZnO layer) in a laminated device, with both the shunt and series resistance showing a strong variation with ZnO thickness. A relatively thick, mixed phase ZnO/bulk hetero-junction in which the bulk hetero-junction penetrates into the porous ZnO layer is proposed to explain the observed performance trends.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
2. Polymer–Fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
3. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
4. Effect of indium and tin contamination on the efficiency and electronic properties of organic bulk hetero-junction solar cells10.1016/j.solmat.2011.07.012 ↗
5. Role of humidity on indium and tin migration in organic photovoltaic devices10.1039/c0cp02203a ↗
6. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
7. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
8. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
9. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
10. Roll-to-roll fabrication of polymer solar cells—review article10.1016/S1369-7021(12)70019-6 ↗
11. Patternable brush painting process for fabrication of flexible polymer solar cells10.1016/j.solmat.2011.09.012 ↗
12. Airbrush spray-coating of polymer bulk-heterojunction solar cells10.1016/j.solmat.2011.01.047 ↗
13. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
14. Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer10.1063/1.2918983 ↗
15. Hybrid inverted bulk heterojunction solar cells with nanoimprinted TiO2 nanopores10.1016/j.solmat.2009.04.014 ↗
16. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
17. Inverted polymer solar cells integrated with a low-temperature-annealed sol–gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
18. Roll-to-roll processing of inverted polymer solar cells using hydrated vanadium(V)oxide as a PEDOT:PSS replacement10.3390/ma4010169 ↗
19. Influence of ZnO interlayer on the performance of inverted organic photovoltaic device10.1016/j.solmat.2011.03.011 ↗
20. Spontaneous formation of nanoripples on the surface of ZnO thin films as hole-blocking layer of inverted organic solar cells
21. Sol–gel processed CuOx thin film as an anode interlayer for inverted polymer solar cells10.1016/j.orgel.2010.08.009 ↗
22. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO[sub 3] hole selective layer10.1063/1.3039076 ↗
23. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
24. M. Mayer, SIMNRA, a simulation program for the analysis of NRA, RBS and ERDA, in: American Institute of Physics Conference Proceedings, 1999, pp. 541.10.1063/1.59188 ↗
25. Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitol10.1016/j.orgel.2008.05.006 ↗
26. Choice of electrode geometry for accurate measurement of organic photovoltaic cell performance10.1063/1.2895058 ↗
27. Electrical and optical properties of ZnO processed by atomic layer deposition in inverted polymer solar cells10.1021/jp106641j ↗
28. The effect of heat treatment on the physical properties of sol–gel derived ZnO thin films10.1016/j.apsusc.2009.01.010 ↗
29. Simultaneous thermogravimetric analysis and in situ thermo-Raman spectroscopic investigation of thermal decomposition of zinc acetate dihydrate forming zinc oxide nanoparticles10.1016/j.cplett.2003.09.125 ↗
30. X-ray photoelectron spectroscopy and auger electron spectroscopy studies of Al-doped ZnO films10.1016/S0169-4332(99)00601-7 ↗
31. XPS and X-ray diffraction studies of aluminum-doped zinc oxide transparent conducting films10.1016/0040-6090(95)08239-5 ↗
32. Electronic core levels of zinc chalcogenides10.1103/PhysRevB.2.4885 ↗
33. Workfunction tuning of zinc oxide films by argon sputtering and oxygen plasma: an experimental and computational study10.1088/0022-3727/45/6/065301 ↗
34. Air-processed organic photovoltaic devices fabricated with hot press lamination10.1016/j.orgel.2010.10.008 ↗
35. An extensively valid and stable method for derivation of all parameters of a solar cell from a single current–voltage characteristic10.1063/1.2895396 ↗
36. Thickness dependence of the MoO[sub 3] blocking layers on ZnO nanorod-inverted organic photovoltaic devices10.1063/1.3554381 ↗
37. Effects of the morphology of a ZnO buffer layer on the photovoltaic performance of inverted polymer solar cells10.1002/adfm.201101915 ↗