Flexible polymer photovoltaic modules with incorporated organic bypass diodes to address module shading effects
Source abstract
Abstract
We present experimental results on large-area low-cost processed flexible organic photovoltaic (OPV) modules incorporating organic bypass diodes to eliminate the negative effects of shading on the module power output. A fully organic-based structure (organic solar module combined with an organic bypass diode) is essential to allow monolithic interconnection of the bypass diode during the solar module production within the same printing steps. The origin of shading losses in organic photovoltaic modules is analyzed in detail, and guidelines for the design and architecture of flexible OPV modules are derived. Inorganic and organic diodes were tested on their functionality as bypass diodes, and a set of diode specifications to minimize shading losses is summarized. Organic bypass diodes were found to efficiently reduce the adverse shading effects in OPV modules.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Analysis and modelling the reverse characteristic of photovoltaic cells10.1016/j.solmat.2005.06.006 ↗
2. Thermal and electrical effects caused by outdoor hot-spot testing in associations of photovoltaic cells10.1002/pip.490 ↗
3. Formation and impact of hot spots on the performance of organic photovoltaic cells10.1063/1.3073857 ↗
4. F.A. Blake, K.L. Hanson, The hot-spot failure mode for solar arrays, in: Proceedings of the Fourth Intersociety Energy Conversion Engineering Conference, 1969, pp. 575–581.
5. European Norm EN-61215, Crystalline silicon terrestrial photovoltaic (PV) modules—design qualification and type approval, 1995.
6. European Norm EN-61646, Thin-film terrestrial Photovoltaic (PV) modules—design qualification and type approval, 1997.
7. UL1703, UL standard for safety for flat-plate photovoltaic modules and panels, 1993.
8. IEEE 1262, IEEE recommended practice for qualification of photovoltaic (PV) modules, 1995.
9. See press release on 〈www.konarka.com〉, December 2008.
10. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
11. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
12. The impact of water vapor transmission rate on the lifetime of flexible polymer solar cells10.1063/1.2975185 ↗
13. High photovoltaic performance of inkjet printed polymer:fullerene blends10.1002/adma.200700911 ↗
14. Printing highly efficient organic solar cells10.1021/nl801365k ↗
15. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
16. E. Molenbroek, D.W. Waddington, Conference Record of the IEEE Photovoltaic Specialists Conference, vol. 1, 1992, pp. 547–552.
17. Woyte · Sol. Energy · 2003 · 74 · 21710.1016/S0038-092X(03)00155-5 ↗
18. Performance analysis of printed bulk heterojunction solar cells10.1002/adfm.200500581 ↗
19. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
20. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
21. Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells10.1016/j.solmat.2008.12.013 ↗
22. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
23. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
24. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
25. Dynamic characterization of organic bulk heterojunction photodetectors10.1063/1.2772198 ↗
26. D. Zipperer, Organische Gleichrichter, Friedrich-Alexander-Universität Erlangen-Nürnberg.
27. Fully spray coated organic photodiodes10.1021/nl803386y ↗