journal article·2011-01

Performance of low series-resistance interconnections on the polycrystalline solar cells

Hsin-Hsin Hsieh, Fu-Ming Lin, Shan-Pu Yu

Publisher page

Abstract

The performance of four ribbons of lead SnAgPb (SAP) and lead-free SnAgCu (SAC) photovoltaic (PV) ribbons in patterned (pat-) and high-conductivity (con-) types soldered on silicon solar cells are investigated by electron characteristics and microstructure analyses. The electrical performances of the solar strings were characterized before and after the soldering process by a solar flasher, and strings with commercial ribbons of lead and lead-free are compared. In general, lead ribbon solar strings show lower power loss value than lead-free counterparts. And the commercial lead and lead-free ribbon strings show highest power loss around 6.66%–10.65% of all the solar strings. Furthermore, the power losses for patterned lead (pat-SAP) and lead-free (pat-SAC) solar string are 3.93% and 5.51%, respectively, implying that a patterned structure should improve the soldering process and result in lower power loss. Yet, significant low output power loss values are detected in the solar strings which are soldered with high-conductivity ribbons. It is estimated that the power loss for high-conductivity lead (con-SAP) and lead-free (con-SAC) solar strings are 3.89% and 4.43%, respectively. And a similar condition was revealed when the solder materials were practically interconnected the solar cells in PV modules. According to the microstructure analyses, the low power loss of con-SAP solar string should be due to the good electrical performance in low series resistance (Rs) and high shunt resistance (Rsh), thus resulting in a high fill factor of the solar device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Silicon and Solar Cell Technologies · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Tensile behavior of Pb–Sn solder/Cu joints10.1007/BF02655488 ↗
2. Constant strain rate tensile properties of various lead based solder alloys at 0, 50 and 100°C10.1016/0956-716X(92)90414-A ↗
3. The role of Cu–Sn intermetallics in wettability degradation10.1007/BF02655460 ↗
4. Intermetallic growth and mechanical behavior of low and high melting temperature solder alloys10.1007/BF02665483 ↗
5. Directive 2002/95/ec of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment EC, 2003.
6. Lead-free solders in microelectronics10.1016/S0927-796X(00)00010-3 ↗
7. Advances in lead-free electronics soldering10.1016/S1359-0286(00)00036-X ↗
8. Y. Zheng, C. Hillman, P. McCluskey, Intermetallic growth on PWBs soldered with Sn3.8Ag0.7Cu, in:Proceedings of the 52nd Electronic Components & Technology Conference, 2002, pp. 1226–1231.10.1109/ECTC.2002.1008263 ↗
9. S. Ransome, J. Wohlgemuth, An overview of 4 years of kWh/kWp monitoring at 67 Sites worldwide, 3rd World Conference on Photovoltaic Energy Conference, 7P-B3-03, Osaka, Japan, 2003, pp. 2206–2209.
10. Effect of intermetallic compounds on the thermal fatigue of surface mount solder joints10.1109/96.554534 ↗
11. Development of Cu–Sn intermetallic compound at Pb-free solder/Cu joint interface10.1016/S0167-577X(03)00075-2 ↗
12. The effect of temperature and solders on the wettability between ribbon and solar cell10.1016/j.solmat.2008.10.005 ↗
13. Massalski · 1990
14. Phase equilibria of the Ag–Sn–Cu ternary system10.1557/JMR.2004.0296 ↗
15. IEC, Photovoltaic Devices—Solar Simulator Performance Requirements, IEC 60904-9, ed. 2, 2007.
16. E.M. Sachs, J. Serdy, A.M. Gabor, and F. Van Mierlo, Light – capturing interconnect wire for 2% module power gain, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference and Exhibition, 4CO.2.1, Hamburg, Germany, 2009.
17. T.C. Wei, and A.R. Daud,The effects of aged Cu–Al intermetallics to electrical resistance in microelectronics packaging, Microelec. Int. 19(2) (2002) 38-43.10.1108/13565360210427889 ↗
18. Co–Sn (cobalt–tin)10.1361/154770306X109999 ↗