Synchronous spectral management and UV tolerance in carbon-based perovskite solar cells by Eu3+ doped BaTiO3/TiO2 nanocomposite ETL
Source abstract
Abstract
Down-conversion, a Stokes emission, is a solution for overcoming UV-driven deterioration and maximizing current collection in the perovskite solar cells. Down-conversion nanophosphor plays a crucial role in converting a single high-energy UV photon into multiple low-energy visible photons; thus, it aids the perovskite layer to absorb multiple photons, resulting in increased carrier generation. For the first time, Eu 3+ :BaTiO 3 /TiO 2 nanocomposite was used as the electron transport layer in the carbon electrode-based perovskite solar cells. This Eu 3+ :BaTiO 3 owns unique benefits possessed by the Lanthanide doping onto the perovskite oxide host matrix. The optimization of nanophosphor involved varying the concentrations of the Eu dopant (0, 1, 3, 5, 7 & 9 mol%). Based on the performance, 5 % Eu concentration was selected as the optimal version, corroborated by suitable material characterizations. On compositing this 5 mol% Eu 3+ :BaTiO 3 with TiO 2 in different wt% (0, 20, 40, 60, 80 and 100), the superior variant (40 %Eu-BTO-based-device) produced the highest efficiency (η) = 11.4 %, J sc = 22.28 mA/cm 2 and FF = 53.5 % among others. This champion device retained 83 % of its initial efficiency after 40 days under ambient conditions (relative humidity ∼50 %) and 72 % of its initial efficiency after 48 h under continuous UV illumination. The reproducibility and the cell performances were examined by adequate studies and the evidence supporting the results was discussed. This research demonstrated that the remarkable Eu-BTO/TiO 2 nanocomposite, used for electron transportation in the economical perovskite solar cell, enhanced device stability by reducing degradation caused by environmental moisture and UV irradiation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · TiO2 Photocatalysis and Solar Cells · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Downconversion materials for perovskite solar cells10.1002/solr.202200266 ↗
2. Enhanced electron harvesting in next generation solar cells by employing TiO2 nanoparticles prepared through hydrolysis catalytic process10.1016/j.ceramint.2021.04.131 ↗
3. An overview of the decompositions in organo-metal halide perovskites and shielding with 2-dimensional perovskites10.1016/j.rser.2019.04.022 ↗
4. Synergistic effect of In2O3 nanocuboids and TiO2 nanocubes in electron transport bilayer for carbon-based perovskite solar cells10.1016/j.ceramint.2024.06.330 ↗
5. Recent advances and challenges in solar photovoltaic and energy storage materials: future directions in Indian perspective
6. Poly(vinylidene fluoride‐co‐hexafluoropropylene) additive in perovskite for stable performance of carbon‐based perovskite solar cells10.1002/er.7270 ↗
7. Perovskite/polymer hybrid thin films for high external quantum efficiency photodetectors with wide spectral response from visible to near‐infrared wavelengths10.1002/adom.201700213 ↗
8. Mechanisms and suppression of photoinduced degradation in perovskite solar cells10.1002/aenm.202002326 ↗
9. Recent advances of rare-earth ion doped luminescent nanomaterials in perovskite solar cells10.3390/nano8010043 ↗
10. Mn doped and undoped ZnO films: a comparative structural, optical and electrical properties study10.1016/j.matchemphys.2005.07.045 ↗
11. Efficient rare Earth co-doped TiO2 electron transport layer for high-performance perovskite solar cells10.1016/j.jcis.2019.06.003 ↗
12. Reduced ultraviolet light induced degradation and enhanced light harvesting using YVO4:Eu3+ down-shifting nano-phosphor layer in organometal halide perovskite solar cells10.1063/1.4891181 ↗
13. Effects of down-conversion CeO2:Eu3+ nanophosphors in perovskite solar cells10.1007/s10854-017-6928-0 ↗
14. Down-conversion Ce-doped TiO2 nanorod arrays and commercial available carbon based perovskite solar cells: improved performance and UV photostability10.1016/j.ijhydene.2020.11.074 ↗
15. Synthesis and luminescence properties of BaTiO3:RE (RE = Gd3+, Dy3+, Tb3+, Lu3+) phosphors10.1007/s12034-012-0394-3 ↗
16. Preparation and luminescent properties of Eu-doped BaTiO3 thin films by sol–gel process10.1016/S1468-6996(03)00027-5 ↗
17. Synthesis condition and structural/luminescent properties of CaTiO3:Eu3+ red phosphor10.1016/j.jallcom.2015.06.200 ↗
18. Improvement of the luminescence properties of CaTiO3:Pr obtained by modified solid-state reaction10.1016/j.powtec.2009.05.005 ↗
19. Combustion synthesis and luminescent properties of CaTiO3: pr, Al persistent phosphors10.1016/j.jallcom.2006.09.120 ↗
20. Chemical structures and performance of perovskite oxides10.1021/cr980129f ↗
21. Thermal stability of the perovskite BaBiO310.1006/jssc.1999.8390 ↗
22. Perovskite oxides – a review on a versatile material class for solar-to-fuel conversion processes10.1039/C7TA00987A ↗
23. Perovskite oxides: preparation, characterizations, and applications in heterogeneous catalysis10.1021/cs500606g ↗
24. Perovskite oxides as transparent semiconductors: a review10.1186/s40580-020-00242-7 ↗
25. Perovskite oxides: syntheses and perspectives on their application for nitrate reduction10.1021/acsomega.4c01487 ↗
26. Dye-sensitized solar cells made from BaTiO3-coated TiO2 nanoporous electrodes10.1016/j.jphotochem.2008.01.002 ↗
27. Generalized large-scale synthesis of MTiO3 (M=Ba, Sr, Pb) nanocrystals10.1016/j.materresbull.2007.04.034 ↗
28. Effects of nematic liquid crystal additives on the performance of polymer solar cells: effects of nematic liquid crystal additives on the performance …, Macromol
29. Dual mode luminescence from lanthanum orthovanadate nanoparticles10.1016/j.jlumin.2019.116761 ↗
30. Photoluminescence properties and energy transfer in the color tunable Ba2CaZn2Si6O17:Bi3+, Tb3+, Eu3+ silicate phosphor for white LED applications10.1016/j.inoche.2020.108308 ↗
31. Theoretical calculation and analysis of ZrO2 spherical nanometer powders10.1007/s40145-013-0036-2 ↗
32. Catalyzing the affordability of perovskite solar cells with aluminum-modified cubic titania10.1021/acsaom.3c00410 ↗
33. Improved photon to current conversion in nanostructured TiO2 dye-sensitized solar cells by incorporating cubic BaTiO3 particles deliting incident10.1016/j.solener.2016.02.026 ↗
34. Cubic CeO2 nanoparticles as mirror-like scattering layers for efficient light harvesting in dye-sensitized solar cells10.1039/c2cc32239k ↗
35. Effect of parasitic absorption of the plasmonic cubic nanoparticles on the performance of a plasmonic assisted halide thin-film perovskite solar cell10.1016/j.solener.2021.05.081 ↗
36. Tuning the structural, optical, and dielectric properties of europium-doped barium titanate ceramics10.1007/s10854-024-12984-9 ↗
37. Structural and photoluminescence properties of Eu3+-activated BaTiO3 phosphors10.1016/j.molstruc.2021.131609 ↗
38. Luminescent properties and energy transfer of Gd3+/Eu3+ co-doped cubic CaCO310.1016/j.jlumin.2016.06.009 ↗
39. Visible quantum cutting through downconversion in KLiGdF5:Eu3+ crystals10.1063/1.2135893 ↗
40. Highly stable MAPbI3 microcrystals: a single precursor derived from low-grade PbI2 using sono-chemical method for economical and efficient perovskite solar cells10.1007/s10854-022-08944-w ↗
41. Multi-dynamics and emission tailored fluoroperovskite-based down-conversion phosphors for enhancing the current density and stability of the perovskite solar cells10.1039/D3SE00354J ↗
42. Reporting solar cell efficiencies in solar energy materials and solar cells10.1016/j.solmat.2008.01.003 ↗
43. Interfacial passivation towards attainment of efficient and stable carbon-based CsPbIBr2 perovskite solar cells at ambient air10.1016/j.mssp.2024.108134 ↗
44. Cu-doped nickel oxide interface layer with nanoscale thickness for efficient and highly stable printable carbon-based perovskite solar cell10.1016/j.solener.2019.02.056 ↗