journal article·2026-04Open access

Improved interface passivation in high-efficiency Se-alloyed CdTe solar cells using a SnO2/ZnO n-type bilayer

Xiaolei Liu, Luksa Kujovic, Zhaoxia Zhou, Stuart Robertson, Mustafa Togay, Jacques Kenyon, Luis C. Infante-Ortega, Martin Bliss, Jake W. Bowers, John M. Walls, Ciaran Llewelyn, Dan A. Lamb, Stuart J.C. Irvine, Chungho Lee, Wei Zhang, Dingyuan Lu, Gang Xiong

Abstract

Thin film cadmium telluride is the most important second-generation solar cell technology. Although the photo-absorber is polycrystalline, high conversion efficiency has been achieved by effectively passivating the grain boundaries and other bulk defects. In this paper, we report on the use of a bilayer SnO 2 /ZnO n-type buffer to improve passivation at the p–n junction interface to achieve 21.7% efficiency. We have assessed the quality of the interface with highly sensitive electrical measurements and a combination of high-resolution electron microscopy and cathodoluminescence. High-resolution cathodoluminescence has enabled the measurement of the recombination velocity to quantify the improvement in interface defect passivation. We have combined this with direct observation of the coherence of the interface at the atomic scale. The use of these techniques will revolutionize our ability to assess future passivation strategies at the front p–n junction and also at the back contact of thin film photovoltaic devices. • A novel n-type bilayer of SnO 2 /ZnO is used to improve passivation of the p–n junction in CdSeTe/CdTe solar cells. • Using the bilayer, a conversion efficiency of 21.7% is achieved for without an anti-reflection coating on the front glass surface. • High resolution transmission electron microscopy (HRTEM) is used to observe the atomic coherence of the p–n junction. • High-resolution cathodoluminescence enables the measurement of the recombination velocity to quantify the improvement in interface defect passivation. • Combining HRTEM with high-resolution CL enables direct assessment of solar cell interface quality.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Silicon and Solar Cell Technologies · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. CdTe-based thin film photovoltaics: Recent advances, current challenges and future prospects10.1016/j.solmat.2023.112289 ↗
2. First Solar · 2025
3. NREL · 2025
4. Embodied energy and carbon from the manufacture of cadmium telluride and silicon photovoltaics10.1016/j.joule.2022.06.006 ↗
5. Effect of CdCl2 passivation treatment on microstructure and performance of CdSeTe/CdTe thin-film photovoltaic devices10.1016/j.solmat.2018.06.016 ↗
6. Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells10.1038/s41560-019-0389-z ↗
7. Polycrystalline CdTe photovoltaics with efficiency over 18% through improved absorber passivation and current collection10.1016/j.solmat.2017.11.031 ↗
8. Eliminating S-Kink to maximize the performance of MgZnO/CdTe solar cells10.1021/acsaem.9b00233 ↗
9. Degradation of Mg-doped zinc oxide buffer layers in thin film CdTe solar cells10.1016/j.tsf.2019.137556 ↗
10. Transient metastable behavior caused by magnesium-doped zinc oxide emitters in CdSeTe/CdTe solar cells10.1109/JPHOTOV.2023.3243399 ↗
11. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
12. Optimising the thickness of sputtered SnO2 buffer layers for high efficiency CdSeTe/CdTe devices
13. Electrical properties and topography of SnO2 thin films prepared by reactive sputtering10.1016/S0169-4332(96)00679-4 ↗
14. Achieving 21.4% efficient CdSeTe/CdTe solar cells using highly resistive intrinsic ZnO buffer layers10.1002/adfm.202312528 ↗
15. Development of ZnO buffer layers for as-doped CdSeTe/CdTe solar cells with efficiency exceeding 20%10.1002/admt.202401364 ↗
16. The effect of annealing and CdCl2 activation on the electrical properties of thin film ZnO buffer layers for CdSeTe/CdTe solar cells
17. Thin-film solar cells with 19% efficiency by thermal evaporation of CdSe and CdTe10.1021/acsenergylett.9b02836 ↗
18. Recombination and bandgap engineering in CdSeTe/CdTe solar cells10.1063/1.5098459 ↗
19. The effect of remnant CdSe layers on the performance of CdSeTe/CdTe photovoltaic devices10.1016/j.solmat.2024.112717 ↗
20. Cathodoluminescence analysis of grain boundaries and grain interiors in thin-film CdTe10.1109/JPHOTOV.2014.2359732 ↗
21. STEM-Cathodoluminescence of SnO2 nanowires and powders10.1016/j.snb.2016.08.145 ↗
22. Characterization of ZnO nanoparticles by resonant Raman scattering and cathodoluminescence spectroscopies10.1063/1.2901159 ↗
23. Unveiling defect-mediated charge-carrier recombination at the nanometer scale in polycrystalline solar cells10.1021/acsami.9b14730 ↗
24. Selenium passivates grain boundaries in alloyed CdTe solar cells10.1016/j.solmat.2022.111595 ↗
25. A contactless method for measuring the recombination velocity of an individual grain boundary in thin-film photovoltaics10.1063/1.3486482 ↗
26. Injected current carrier transport in a semi-infinite semiconductor and the determination of lifetimes and surface recombination velocities10.1063/1.1722002 ↗
27. Limitation factors for the performance of kesterite Cu2ZnSnS4 thin film solar cells studied by defect characterization10.1039/C5RA00069F ↗
28. Arsenic-doped CdSeTe solar cells achieve world record 22.3% efficiency10.1109/JPHOTOV.2023.3282581 ↗
29. 20%-efficient polycrystalline Cd(Se, Te) thin-film solar cells with compositional gradient near the front junction10.1038/s41467-022-35442-8 ↗