How the selenium is affecting the physical and electrical properties of ultra-thin CdSeTe/CdTe solar cells
Source abstract
Abstract
The incorporation of selenium into the CdTe has recently enhanced the performance of the solar cells to 23.1 %. The narrower band gap of the CdSeTe/CdTe absorber boosts the short-circuit current density; also, Se introduction increases the carrier's lifetime. Optimizing CdSe x Te 1-x band-grading is crucial for achieving high-performance CdTe photovoltaics. Another current goal is to reduce the thickness of the absorber to further reduce production costs and environmental impact. Thus, studying the effects of Se introduction in ultra-thin CdTe absorbers is essential. To investigate Se concentration's impact on ultra-thin CdTe, we fabricated CdSeTe/CdTe devices with an absorber thickness of 0.8 μm by depositing different CdSe/CdTe ratios. Our 0.8 μm thick cells have currently achieved an efficiency of 12.8 %, but most important this study shows that Se introduction in ultra-thin CdTe results in structural properties different from those of thicker absorbers, impacting the device performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Solar cell efficiency tables (version 66)
2. Lingg · 2019
3. Solar cell efficiency tables (version 56)10.1002/pip.3303 ↗
4. Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells10.1038/s41560-019-0389-z ↗
5. Study of ultra-thin cadmium telluride solar cells
6. High-performance ultra-thin CdTe solar cells with CuxByO back-buffer layer by a low-temperature solution processing10.1016/j.solmat.2025.113447 ↗
7. Research on ultra-thin cadmium telluride heterojunction thin film solar cells10.1016/j.rser.2024.114996 ↗
8. The history of photovoltaics with emphasis on CdTe solar cells and modules10.3390/coatings10040344 ↗
9. Influence of CdTe thickness on structural and electrical properties of CdTe/CdS solar cells10.1016/j.tsf.2012.11.121 ↗
10. Scarpulla · 2023
11. Roadmap on energy harvesting materials
12. Low substrate temperature CdTe solar cells: a review
13. How the selenium distribution in CdTe affects the carrier properties of CdSeTe/CdTe solar cells10.1016/j.solener.2023.05.058 ↗
14. A new method for CdSexTe1-x band grading for high efficiency thin-absorber CdTe solar cells
15. Improved stability of CdTe solar cells by absorber surface etching10.1016/j.solmat.2016.12.044 ↗
16. Co-sublimation of CdSexTe1−x layers for CdTe solar cells10.1016/j.solmat.2016.09.025 ↗
17. Microstructural parameters from X-ray diffraction peak broadening10.1016/j.scriptamat.2004.05.007 ↗
18. Absorber texture and the efficiency of polycrystalline thin film CdTe solar cells10.1016/j.tsf.2024.140277 ↗
19. Recombination and bandgap engineering in CdSeTe/CdTe solar cells10.1063/1.5098459 ↗
20. Correlation of surface phases with electrical behavior in thin-film CdTe devices10.1016/S0040-6090(03)00266-9 ↗
21. Enhancing the photo-currents of CdTe thin-film solar cells in both short and long wavelength regions10.1063/1.4901532 ↗
22. The effect of remnant CdSe layers on the performance of CdSeTe/CdTe photovoltaic devices10.1016/j.solmat.2024.112717 ↗
23. Raguse · 2015
24. Understanding the copassivation effect of Cl and Se for CdTe grain boundaries10.1021/acsami.1c06587 ↗
25. Bulk and metastable defects in CuIn1-xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
26. Strategies to increase CdTe solar-cell voltage10.1016/j.tsf.2006.12.147 ↗
27. Theoretical analysis of effects of deep level, back contact, and absorber thickness on capacitance-voltage profiling of CdTe thin-film solar cells10.1016/j.solmat.2012.01.003 ↗
28. Quantification of losses in thin-film CdS/CdTe solar cells
29. Cadmium selective etching in CdTe solar cells produces detrimental narrow-gap Te in grain boundaries10.1021/acsaem.9b02224 ↗
30. How the amount of copper influences the formation and stability of defects in CdTe solar cells10.1016/j.solmat.2019.110228 ↗
31. Back contact formation in thin cadmium telluride solar cells10.1016/j.tsf.2010.12.144 ↗