Optimizing thermophotovoltaic (TPV) systems through photon fate analysis: An experimental case study based on ellipsoidal optical cavities
Source abstract
Abstract
This study presents a comprehensive photon fate framework for thermophotovoltaic (TPV) systems, integrating both numerical and experimental approaches to optimize performance through photon recycling, for different photovoltaic (PV) cells (Si, GaSb, and InGaAsSb). A quantitative analysis of optimal recycling factors reveals their strong dependence on power levels, view factor losses, and PV cell type. Results show lower emitter input power necessitates higher recycling factors for optimal performance. In an InGaAsSb-based TPV system with an emitter input power of 10 W/cm 2 , the maximum electrical output power is P elc = 2.4 W/cm 2 (for view factor loss F VF-loss = 1 %), 1.63 W/cm 2 ( F VF-loss = 5 %), and 0.87 W/cm 2 ( F VF-loss = 20 %), corresponding to optimal photon recycling factors of F rec = 92 %, 79 %, and 44 %, respectively. Experimental validation is achieved using a TPV system with a novel ellipsoidal optical cavity configuration featuring silver-coated annular rings with tunable width-to-diameter ratios ( ω/a = 0, 0.2, 0.4, 0.6, 0.8) to precisely control photon recycling factors from F rec = 0 to F rec = 0.735. The impact of temperature-dependent recycling effectiveness is analyzed, demonstrating enhancement factors up to ∼210 times at low-temperature operation and ∼80 times at higher temperatures. These results provide insights into operating temperature strategies and establish a practical design framework for optimizing TPV systems. Furthermore, the findings serve as a valuable tool for system-level trade-offs, offering guidance for maximizing efficiency based on system constraints. This work lays the foundation for next-generation TPV system designs, advancing the integration of photon management strategies for high-performance energy conversion. • Photon fate analysis used to maximize TPV system performance. • Emitter temperature increases of 300 K achieved in experiments. • Photon recycling increases TPV system output power by orders of magnitude.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Advanced Thermodynamics and Statistical Mechanics · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Present efficiencies and future opportunities in thermophotovoltaics10.1016/j.joule.2020.06.021 ↗
2. Thermophotovoltaic efficiency of 40%10.1038/s41586-022-04473-y ↗
3. High-efficiency air-bridge thermophotovoltaic cells10.1016/j.joule.2024.05.002 ↗
4. Theoretical limits of thermophotovoltaic solar energy conversion10.1088/0268-1242/18/5/303 ↗
5. Practical challenges towards 50% efficient thermophotovoltaic energy conversion
6. Evaluation of a ZrO2/ZrO2-aerogel one-dimensional photonic crystal as an optical filter for thermophotovoltaic applications
7. Two-dimensional photonic crystals as selective filters for thermophotovoltaic applications10.1364/OE.480431 ↗
8. Comparative analysis of graded-index and quarter-wave one-dimensional photonic crystal filters for GaSb TPV cells
9. Bifacial thermophotovoltaic energy conversion10.1021/acsphotonics.2c01839 ↗
10. Semitransparent thermophotovoltaics for efficient utilization of moderate temperature thermal radiation10.1073/pnas.2215977119 ↗
11. Design and global optimization of high-efficiency solar thermal systems with tungsten cermets10.1364/OE.19.00A245 ↗
12. A review of CermetBased spectrally selective solar absorbers10.1039/c3ee43825b ↗
13. Metamaterial emitter for thermophotovoltaics stable up to 1400 C10.1038/s41598-019-43640-6 ↗
14. Design of wide-angle selective absorbers/emitters with dielectric filled metallic photonic crystals for energy applications10.1364/OE.22.00A144 ↗
15. Evaluation of elliptical optical cavity for a combustion thermophotovoltaic system10.1016/j.solmat.2017.07.001 ↗
16. Fabergé optics and edge filter for a wood powder fuelled thermophotovoltaic system10.1016/S0960-1481(02)00050-2 ↗
17. Bauer · 2011 · 101
18. Optical cavity for improved performance of solar receivers in solar-thermal systems10.1016/j.solener.2014.06.023 ↗
19. Design and optimization of thermophotovoltaic system cavity with mirrors10.3390/en9090722 ↗
20. Optimum aperture size and operating temperature of a solar cavity-receiver10.1016/0038-092X(93)90004-8 ↗
21. Specular side reflectors for high efficiency thermal-to-optical energy conversion10.1364/OE.26.00A462 ↗
22. The effect of optical cavities on thermophotovoltaic systems
23. Spheroid-based optical cavities for tunable photon recycling and emitter temperature control in robust solar thermophotovoltaic systems10.1117/1.JPE.13.018501 ↗
24. Selectively harvesting nonvisible photons in hybrid solar lighting systems for power generation in buildings10.1002/ente.202200734 ↗
25. Ellipsoidal optical cavities for enhanced thermophotovoltaics10.1109/JPHOTOV.2021.3116918 ↗
26. Elliptic array luminescent solar concentrators for combined power generation and microalgae growth10.3390/en14175229 ↗
27. Elliptic paraboloid-based solar spectrum splitters for self-powered photobioreactors10.1016/j.renene.2020.10.064 ↗
28. Optical cavity for improved performance of solar receivers in solar-thermal systems10.1016/j.solener.2014.06.023 ↗