Photon-enhanced thermionic emission devices with perovskite photovoltaic anodes for conversion of concentrated sunlight
Source abstract
Abstract
Perovskite photovoltaic (PV) structures have been applied for the first time as anodes in photon-enhanced thermionic emission (PETE) devices to collect electrons as well as to photoelectrically convert the radiation emitted from high temperature silicon/diamond cathodes. Hybrid PETE-PV devices have been tested under concentrated sunlight, reaching the maximum cathode temperature of 650 °C. Experiments show that the PV anodes can operate without damage up to a cathode temperature of 560 °C, corresponding to an approximate surface anode temperature of 130 °C. The proposed converters in a 2-terminals configuration confirm an output voltage boost with respect to the mere PETE converters. Additionally, an effective reduction of the anode work function between 0.45 and 0.6 eV is achieved by depositing a 20 nm-thick scandium oxide coating. Even if the materials used for these proof-of-concept experiments are not optimized for the investigated operating temperature range, this study highlights the feasibility of using perovskites as photovoltaic anodes in PETE devices for the conversion of the concentrated solar radiation, thus opening the path for future development of the concept to large-area and low production cost perovskite PV-based structures in thermionic-based energy converters. • Perovskite photovoltaic anodes were used for hybrid thermionic-based devices. • Photon-enhanced thermionic emission was explored in the converter hybridization. • Both hybrid 2T- and 3T-configurations were fabricated with perovskite thin films. • A surface temperature <130 °C is estimated to prevent anode degradation. • A reduction of anode bandgap is necessary for future exploitation of the concept.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Perovskite Materials and Applications · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Wafer bonded four-junction GaInP/GaAs//GaInAsP/GaInAs concentrator solar cells with 44.7% efficiency10.1002/pip.2475 ↗
2. Novel concepts and nanostructured materials for thermionic-based solar and thermal energy converters10.1088/1361-6528/abba57 ↗
3. Hybrid thermionic-photovoltaic converter10.1063/1.4945712 ↗
4. Hybrid thermionic-photovoltaic converter with an In0.53Ga0.47As anode10.1016/j.solmat.2022.111588 ↗
5. Photovoltaic anodes for enhanced thermionic energy conversion10.1021/acsenergylett.0c00022 ↗
6. A three‐Terminal hybrid thermionic‐photovoltaic energy converter10.1002/aenm.202200357 ↗
7. Experimental and theoretical study on hybrid thermionic-photovoltaic energy converters with graphene/semiconductor Schottky junction
8. Hybrid thermionic-photovoltaic converter with graphene-on-semiconductor heterojunction anode for efficient electricity generation10.1016/j.isci.2022.105051 ↗
9. Photon-enhanced thermionic emission for solar concentrator systems10.1038/nmat2814 ↗
10. Hybrid photon-enhanced thermionic emission and photovoltaic converter with concentrated solar power10.1016/j.solmat.2023.112279 ↗
11. The effects of electronic and photonic coupling on the performance of a photothermionic-photovoltaic hybrid solar device10.1016/j.solmat.2022.111945 ↗
12. Present efficiencies and future opportunities in thermophotovoltaics10.1016/j.joule.2020.06.021 ↗
13. Photon-enhanced thermionic emission from heterostructures with low interface recombination10.1038/ncomms2577 ↗
14. A review of advances in thermophotovoltaics for power generation and waste heat harvesting10.1557/adv.2019.342 ↗
15. Upscaling of carbon-based perovskite solar module10.3390/nano13020313 ↗
16. Perovskite solar cell technology scaling-up: eco-efficient and industrially compatible sub-module manufacturing by fully ambient air slot-die/blade meniscus coating10.1002/pip.3741 ↗
17. Low electron affinity silicon/nanocrystalline diamond heterostructures for photon-enhanced thermionic emission10.1021/acsaem.3c02735 ↗
18. Thermally enhanced photoinduced electron emission from nitrogen-doped diamond films on silicon substrates10.1103/PhysRevB.90.121302 ↗
19. Combined visible light photo-emission and low temperature thermionic emission from nitrogen doped diamond films10.1063/1.3658638 ↗
20. Thermionic performance of nanocrystalline diamond/silicon structures under concentrated solar radiation10.1016/j.ceramint.2022.10.200 ↗
21. Si, GaAs, and InP as cathode materials for photon-enhanced thermionic emission solar cells10.1016/j.solmat.2014.12.021 ↗
22. Phase-engineering of layered nickel hydroxide for synthesizing high-quality NiOx nanocrystals for efficient inverted flexible perovskite solar cells10.1021/acsami.3c06717 ↗
23. Multi-technique approach for work function exploration of Sc(2)O(3) thin films10.3390/nano13081430 ↗
24. Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells10.1038/s41566-022-00985-1 ↗
25. A review on energy band‐gap engineering for perovskite photovoltaics10.1002/solr.201970116 ↗
26. The expanding world of hybrid perovskites: materials properties and emerging applications10.1557/mrc.2015.6 ↗
27. Thermionic emission measurement of sintered lanthanum hexaboride discs and modelling of their solar energy conversion performance10.1016/j.ceramint.2021.04.079 ↗
28. Performance evaluation and optimization of the cooling system of a hybrid thermionic-photovoltaic converter10.1016/j.enconman.2020.112717 ↗
29. Revealing unusual bandgap shifts with temperature and bandgap renormalization effect in phase-stabilized metal halide perovskite thin films10.1002/adfm.202302214 ↗
30. Temperature-dependence of the band gap in the all-inorganic perovskite CsPbI3 from room to high temperatures10.1039/D2CP00940D ↗
31. Understanding temperature-induced performance degradation in perovskite/silicon tandem solar cells10.1016/j.solmat.2024.113393 ↗
32. Temperature dependence of the band gap of perovskite semiconductor compound CsSnI310.1063/1.3638699 ↗
33. Enhanced crystal formation of methylammonium lead iodide via self-assembled monolayers and their solvation for perovskite solar cells10.1007/s10854-018-0365-6 ↗