journal article·2025-01

Interface-enhanced germanium selenide solar cells comprising an ultrathin and uniform antimony selenide buffer layer via hydrothermal approach

Jing Zhou, Shengwen Yang, Li Gao, Zhenming Qu, Yu Cao, Xiaoming Yu, Xuan Yu, Jian Ni, Jianjun Zhang

Publisher page

Abstract

Germanium selenide (GeSe) is a promising thin film photovoltaic absorber material owing to its excellent optoelectronic properties, high stability, and low toxicity. Interface engineering by introducing an ultrathin antimony selenide (Sb 2Se 3) buffer layer between the CdS electron transport layer and GeSe absorber layer is an effective technique for enhancing solar cell performance. However, the key to this technique is the fabrication of a uniform and smooth Sb 2Se 3 buffer layer with minimal thickness. In this study, instead of the conventional closed-space sublimation method, a hydrothermal method was employed to slowly grow an Sb 2Se 3 buffer layer with a thickness of approximately 8 nm. The Se/Na 2SO 3 molar ratio in the selenium source during the hydrothermal synthesis was adjusted; a molar ratio of 1:2 led to an uneven Sb 2Se 3 buffer layer thickness, whereas a molar ratio of 1:10 resulted in the formation of Sb 2O 3 particles on the buffer layer surface. When the Se/Na 2SO 3 molar ratio was 1:6, a smooth, uniform, dense, and impurity-free Sb 2Se 3 buffer layer was obtained, achieving the highest efficiency of 3.33 % in a GeSe solar cell. Moreover, GeSe solar cells with hydrothermally grown Sb 2Se 3 buffer layers demonstrated superior device interface properties and efficiency comparable with those using Sb 2Se 3 buffer layers deposited via closed-space sublimation. This technique offers an effective method for steadily improving the performance of GeSe solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. High-concentration silver alloying and steep back-contact gallium grading enabling copper indium gallium selenide solar cell with 23.6% efficiency10.1038/s41560-024-01472-3 ↗
2. Consequences of grain boundary barriers on electrical characteristics of CIGS solar cells10.1016/j.solmat.2023.112252 ↗
3. Effects of different Cs distribution in the film on the performance of CIGS thin film solar cells10.1016/j.solmat.2020.110917 ↗
4. CdTe thin film solar cells with a SnTe buffer layer in back contact10.1016/j.solmat.2017.12.018 ↗
5. Copper iodide nanoparticles as a hole transport layer to CdTe photovoltaics: 5.5% efficient back-illuminated bifacial CdTe solar cells10.1016/j.solmat.2021.111451 ↗
6. Achieving 21.4% efficient CdSeTe/CdTe solar cells using highly resistive intrinsic ZnO buffer layers10.1002/adfm.202312528 ↗
7. Rotational design of charge carrier transport layers for optimal antimony trisulfide solar cells and its integration in tandem devices10.1016/j.solmat.2019.110279 ↗
8. Towards high efficiency inverted Sb2Se3 thin film solar cells10.1016/j.solmat.2019.109945 ↗
9. Boosting conversion efficiency by bandgap engineering of ecofriendly antimony trisulfide indoor photovoltaics via a modeling approach10.1016/j.solmat.2024.112961 ↗
10. Hydrothermally deposited Sb2S3 absorber, and a Sb2S3/CdS solar cell with VOC approaching 800 mV10.1016/j.solmat.2024.112995 ↗
11. Lowest open-circuit voltage deficit achievement to attain high efficient antimony selenosulfide solar cells10.1002/adfm.202309764 ↗
12. Quasiepitaxy strategy for efficient full-inorganic Sb2S3 solar cells10.1002/adfm.201901720 ↗
13. Improving performance of ZnO Schottky photodetector by inserting MXenes modified-layer10.1016/j.cclet.2022.107881 ↗
14. Additive-assisted hydrothermal growth enabling defect passivation and void remedy in antimony selenosulfide solar cells
15. Recent advances in antimony selenide photodetectors
16. GeSe/MoTe2 vdW heterostructure for UV-VIS-NIR photodetector with fast response
17. Large-area GeSe realized using pulsed laser deposition for ultralow-noise and ultrafast broadband phototransistors10.1021/acsami.3c02522 ↗
18. Investigation of physical and electronic properties of GeSe for photovoltaic applications10.1002/aelm.201700141 ↗
19. GeSe thin-film solar cells fabricated by self-regulated rapid thermal sublimation10.1021/jacs.6b11705 ↗
20. Boosting the efficiency of GeSe solar cells by low-temperature treatment of p-n junction10.1007/s40843-020-1617-x ↗
21. An antibonding valence band maximum enables defect-tolerant and stable GeSe photovoltaics10.1038/s41467-021-20955-5 ↗
22. Antimony selenide as a buffer layer for high-efficiency and highly crystalline germanium monoselenide thin-film solar cells10.1016/j.matlet.2022.133584 ↗
23. Dualfunction of CdCl2 treated SnO2 in Sb2Se3 solar cells10.1016/j.apsusc.2020.147632 ↗
24. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
25. Selective preferred orientation for high-performance antimony selenide thin-film solar cells via substrate surface modulation10.1016/j.jallcom.2022.168593 ↗
26. GeSe photovoltaics: doping, interfacial layer and devices10.1039/D2FD00048B ↗
27. Mechanistic study of the transition from antimony oxide to antimony sulfide in the hydrothermal process to obtain highly efficient solar cells10.1002/cssc.202202049 ↗
28. Efficient Sb2S3 solar cells employing favorable (Sb4S6)n ribbon orientation via hydrothermal method10.1016/j.matlet.2022.132032 ↗
29. Temperature-Gradient solution deposition amends unfavorable band structure of Sb2(S,Se)3 film for highly efficient solar cells10.1002/anie.202406512 ↗
30. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency10.1038/s41560-020-0652-3 ↗
31. Regulating deposition kinetics via a novel additive-assisted chemical bath deposition technology enables fabrication of 10.57%-efficiency Sb2Se3 solar cells10.1039/D2EE02261C ↗
32. Improved stability and efficiency of CdSe/Sb2Se3 thin-film solar cells10.1016/j.solener.2019.06.042 ↗
33. Direct hydrothermal deposition of antimony triselenide films for efficient planar heterojunction solar cells10.1021/acsami.1c02393 ↗
34. Efficiency enhancement of Sb2Se3 solar cells based on electron beam evaporation CdS film with variable deposition temperature10.1016/j.solener.2021.05.047 ↗
35. Molecular induced patching process improving film quality for high-efficiency Cd-free antimony selenosulfide solar cells
36. Fabrication of Sb2Se3 thin film solar cells by Co- sputtering of Sb2Se3 and Se targets10.1016/j.solener.2019.09.046 ↗
37. Optical properties of amorphous and polycrystalline Sb2Se3 thin films prepared by thermal evaporation
38. Efficiency improvement of flexible Sb2Se3 solar cells with non-toxic buffer layer via interface engineering10.1016/j.nanoen.2020.104577 ↗
39. Crystal growth promotion and defect passivation by hydrothermal and selenized deposition for substrate-structured antimony selenosulfide solar cells10.1021/acsami.2c06805 ↗
40. Gram-scale synthesis and optical properties of Sb2O3 octahedron microcrystals10.1016/j.matlet.2012.01.119 ↗
41. Large-scale growth of wire-like Sb2Se3 microcrystallines via PEG-400 polymer chain-assisted route10.1016/j.jcrysgro.2003.11.004 ↗
42. Polyvinylcarbazole as an efficient interfacial modifier for low-cost perovskite solar cells with CuInS2/carbon hole-collecting electrode10.1002/solr.202100074 ↗
43. Synergistic effect of defects passivation and energy level alignment realizing P3HT-based high-efficiency CsPbI3 perovskite solar cells
44. Enhanced performance of GeSe thin-film solar cells via bifacial charge transport materials design10.1016/j.vacuum.2022.111119 ↗
45. Solvent-assisted hydrothermal deposition approach for highly-efficient Sb2(S,Se)3 thin-film solar cells10.1002/aenm.202300391 ↗
46. Interfacial engineering by self-assembled monolayer for high-performance Sb2S3 solar cells10.1002/aenm.202400441 ↗
47. Solvent-additive engineering-assisted improvement of interface contact for producing highly efficient inverted perovskite solar cells10.1002/solr.202100190 ↗
48. Defect engineering in wide-bandgap perovskites for efcient perovskite–silicon tandem solar cells10.1038/s41566-022-01033-8 ↗
49. Dipole field-driven organic-inorganic heterojunction for highly sensitive ultraviolet photodetector10.1021/acsami.3c16985 ↗
50. Distinctive deep-level defects in non-stoichiometric Sb2Se3 photovoltaic materials10.1002/advs.202105268 ↗
51. Chemical etching induced surface modification and gentle gradient bandgap for highly efficient Sb2(S,Se)3 solar cell10.1016/j.apsusc.2021.152193 ↗
52. Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV10.1016/j.nanoen.2020.104806 ↗
53. Highly efficient solar cells based on Cl incorporated tri-cation perovskite materials10.1039/C8TA03953D ↗
54. High-purity inorganic perovskite films for 9.72%-efficiency solar cells10.1002/ange.201800019 ↗
55. Manipulating the electrical properties of Sb2(S,Se)3 film for high-efficiency solar cell10.1002/aenm.202002341 ↗
56. Oxygen content modulation toward highly efficient Sb2Se3 solar cells10.1021/acsami.2c18735 ↗
57. Highly efficient flexible perovskite solar cells with vacuum-assisted low-temperature annealed SnO2 electron transport layer10.1016/j.jechem.2021.09.021 ↗
58. InCl3-modified SnO2 as an electron transporting layer for Cd-free antimony selenide solar cells10.1039/D3TA03358A ↗