journal article·2024-08Open access

Outdoor evaluation of total cross-tied Si module under driving conditions

Yasuyuki Ota, Keiya Tamada, Kyotaro Nakamura, Masafumi Yamaguchi, Yoshio Ohshita, Kenji Araki, Kensuke Nishioka

Abstract

This paper presents the fabrication and evaluation of a total cross-tied (TCT) Si module designed to mitigate the partial shading effect, which is known to reduce the output performance of vehicle-integrated photovoltaic (VIPV) modules. The TCT module, consisting of 27 Si solar cells interconnected both vertically and horizontally, demonstrated an 18.8 % decrease in output power when one cell was shaded. In contrast, the output of the series-parallel (SP) Si module decreased by 31.6 % under the same shading condition. Comparative analysis of the output performances of TCT, SP, and single-string commercial modules under three driving conditions revealed that increasing the number of strings helped alleviate the impact of partial shading. Notably, the TCT module configuration showed a positive impact on mitigating the partial shading effect.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. National Greenhouse Gas Inventory Report of japan, Ministry of the Environment, Japan. Greenhouse Gas Inventory Office of Japan (GIO), CGER, NIES.
2. Solar photovoltaic capacity demand for a sustainable transport sector to fulfil the Paris Agreement by 205010.1002/pip.3114 ↗
3. PV-powered charging station for electric vehicles: power Management with integrated V2G10.3390/app10186500 ↗
4. Optimal photovoltaic/battery energy storage/electric vehicle charging station design based on multi-agent particle swarm optimization algorithm10.3390/su11071973 ↗
5. Programming pluripotent precursor cells derived from Xenopus embryos to generate specific tissues and organs10.3390/genes1030413 ↗
6. Impact of climatic conditions on prospects for integrated photovoltaics in electric vehicles10.1016/j.rser.2022.112109 ↗
7. Static concentrator photovoltaics for automotive applications10.1016/j.solener.2017.03.028 ↗
8. Development of high‐efficiency and low‐cost solar cells for PV‐powered vehicles application10.1002/pip.3343 ↗
9. Output evaluation of a world's highest efficiency flat sub module with InGaP/GaAs/InGaAs inverted triple-junction solar cell under outdoor operation10.7567/JJAP.57.08RD08 ↗
10. Facilitating vehicle-integrated photovoltaics by considering the radius of curvature of the roof surface for solar cell coverage
11. Curve correction of vehicle‐integrated photovoltaics using statistics on commercial car bodies10.1002/pip.3473 ↗
12. Evaluating the output of a car-mounted photovoltaic module under driving conditions10.1109/JPHOTOV.2021.3087748 ↗
13. Vehicle-integrated photovoltaics—a case study for berlin10.3390/wevj15030113 ↗
14. Heinrich · 2020 · 1695
15. 3D solar irradiance model for non-uniform shading environments using shading (aperture) matrix enhanced by local coordinate system10.3390/en16114414 ↗
16. A comprehensive review and analysis of solar photovoltaic array configurations under partial shaded conditions10.1155/2012/120214 ↗
17. Analysis of partially shaded PV modules using piecewise linear parallel branches model
18. An investigation on partial shading of PV modules with different connection configurations of PV cells10.1016/j.energy.2011.02.052 ↗
19. Mathematical analysis of total-cross-tied photovoltaic array under partial shading condition and its comparison with other configurations10.1016/j.solener.2016.03.058 ↗
20. Maximum power enhancement in solar PV modules through modified TCT interconnection method
21. Nakamura · 2023
22. Sky view factor calculations and its application in urban heat island studies10.1016/j.uclim.2019.100498 ↗