Accelerated constant current stress on triple cation perovskite solar cells
Source abstract
Abstract
The increasing demand for renewable and cost-effective energy sources requires not only the development of alternative solar technologies, but these new technologies must be stable enough to be used in a real-life application. For this reason, perovskite solar cells (PSCs) must be investigated not only in terms of power conversion efficiency, but also in terms of reliability. In this work, accelerated forward current stress is applied as a tool to investigate PSCs stability and degradation kinetic emulating real-life scenarios. The choice of the hole-blocking layer (HBL) plays a crucial role in PSCs intrinsic instability as well as in their degradation rate, which follows a stretched exponential law. Here, tin oxide (SnOX) and bathocuproine (BCP) are investigated as HBLs observing that for low stress currents BCP-based PSCs degrade faster than SnOX-based PSCs, whereas for large stress currents SnOX-based PSCs degrade faster than BCP-based PSCs. The results also indicated that the major cause of degradation in the devices is primarily driven by the formation of shunt paths leading to cell breakdown. Our findings offer valuable insights for improving the stability of PSCs under accelerated stress conditions and provide useful information for the design of PSC-based solar panels depending on their field of applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Organic Electronics and Photovoltaics · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Best Research-Cell Efficiency Chart | Photovoltaic Research | NREL, Available online. https://www.nrel.gov/pv/cell-efficiency.html (accessed on March 30, 2023).
2. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance10.1021/jz500279b ↗
3. High defect tolerance in lead halide perovskite CsPbBr310.1021/acs.jpclett.6b02800 ↗
4. Unravelling the role of vacancies in lead halide perovskite through electrical switching of photoluminescence
5. On the current–voltage hysteresis in perovskite solar cells: dependence on perovskite composition and methods to remove hysteresis10.1002/adma.201805214 ↗
6. Coupled ionic-electronic equivalent circuit to describe asymmetric rise and decay of photovoltage profile in perovskite solar cells
7. Understanding lead iodide perovskite hysteresis and degradation causes by extensive electrical characterization10.1016/j.solmat.2018.09.021 ↗
8. Insights into accelerated degradation of perovskite solar cells under continuous illumination driven by thermal stress and interfacial junction10.1021/acsaem.1c02037 ↗
9. Insulative phase formation and polarization resistance of PrBaCo2−xCuxO5+δ under thermal stress10.3390/app12010151 ↗
10. Effects of constant voltage and constant current stress in PCBM:P3HT solar cells10.1016/j.microrel.2015.06.082 ↗
11. Voltage bias stress effects in metal halide perovskites are strongly dependent on morphology and ion migration pathways10.1039/D0TA10371C ↗
12. Effect of bending test on the performance of CdTe solar cells on flexible ultra-thin glass produced by MOCVD10.1016/j.solmat.2020.110552 ↗
13. Analysis of mechanical stress and structural deformation on a solar photovoltaic panel through various wind loads10.1007/s00542-020-05142-8 ↗
14. Mixed cation halide perovskite under environmental and physical stress10.3390/ma14143954 ↗
15. Encapsulation strategies for highly stable perovskite solar cells under severe stress testing: damp heat, freezing, and outdoor illumination conditions10.1021/acsami.1c11628 ↗
16. Accelerated lifetime testing of organic-inorganic perovskite solar cells encapsulated by polyisobutylene10.1021/acsami.7b07625 ↗
17. In-situ measurement of power loss for crystalline silicon modules undergoing thermal cycling and mechanical loading stress testing10.3390/en14010072 ↗
18. Mesoscopic perovskite solar cells and modules
19. Highly stable and efficient perovskite solar cells passivated by a functional amorphous layer10.1039/D1TA07505E ↗
20. Revealing the correlation of light soaking effect with ion migration in perovskite solar cells
21. Light soaking effects in perovskite solar cells: mechanism, impacts, and elimination
22. Understanding the thermal degradation mechanism of perovskite solar cells via dielectric and noise measurements10.1088/1361-6528/ab97d4 ↗
23. Enhanced thermal stability of planar perovskite solar cells through triphenylphosphine interface passivation10.1002/cssc.202102189 ↗
24. Electric-field-induced degradation of methylammonium lead iodide perovskite solar cells10.1021/acs.jpclett.6b01176 ↗
25. Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures10.1038/s41560-019-0529-5 ↗
26. Upscaling inverted perovskite solar cells: optimization of laser scribing for highly efficient mini-modules10.3390/mi11121127 ↗
27. Holistic approach toward a damage-less sputtered indium tin oxide barrier layer for high-stability inverted perovskite solar cells and modules10.1021/acsami.2c10251 ↗
28. 2019
29. Effects of current stress and thermal storage on polymeric heterojunction P3HT:PCBM solar cell
30. Numerical analysis of transient photoconductivity in insulators10.1063/1.330111 ↗
31. Understanding the role of the electron-transport layer in highly efficient planar perovskite solar cells10.1002/cphc.201601245 ↗
32. Effect of BCP buffer layer on eliminating charge accumulation for high performance of inverted perovskite solar cells10.1039/C7RA06365B ↗
33. Ion migration-induced amorphization and phase segregation as a degradation mechanism in planar perovskite solar cells10.1002/aenm.202000310 ↗
34. McPherson · 2019
35. Kinetics of light-induced degradation in semi-transparent perovskite solar cells10.1016/j.solmat.2020.110776 ↗
36. Analysis of degradation kinetics of halide perovskite solar cells induced by light and heat stress10.1016/j.solmat.2022.111899 ↗
37. Intrinsic instability of perovskite solar cells: the role of a hole-blocking layer10.3390/cryst13020185 ↗