journal article·2014-05

Improved outdoor performance of a-Si:H photovoltaic modules fabricated using a high speed two-step deposition of absorbers

Seung Yeop Myong, Sang Won Jeon

Publisher page

Abstract

Abstract We developed high throughput, high efficiency 1.43 m 2 hydrogenated amorphous silicon (a-Si:H) single-junction photovoltaic (PV) modules using a two-step deposition for the intrinsic a-Si:H absorber with the high deposition rate of 0.41 nm/s. The developed module using the two-step deposition method leads to higher initial maximum power ( P max ) due to the reduced recombination loss at the p/i interface, compared to the a-Si:H single-junction PV module fabricated by the conventional one-step deposition with the low deposition rate of 0.20 nm/s. In addition, the developed module exhibits moderate light-induced degradation ratio of 26.1% in an outdoor exposure test with accumulated solar irradiance >380 kWh/m 2 . Thus, the comparable energy output gain is confirmed via a long-term outdoor field test. Consequently, superior throughput of the developed module over the conventional module is possible with comparable stabilized performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Photovoltaic technology: the case for thin-film solar cells10.1126/science.285.5428.692 ↗
2. High quality amorphous Si solar cells for large area mass production micromorph tandem cells10.1016/j.jnoncrysol.2011.12.017 ↗
3. Reversible conductivity changes in discharge-produced amorphous Si10.1063/1.89674 ↗
4. New interpretation of the effect of hydrogen dilution of silane on glow-discharged hydrogenated amorphous silicon for stable solar cells10.1143/JJAP.35.26 ↗
5. Effect of hydrogen dilution on the structure of amorphous silicon alloys10.1063/1.119928 ↗
6. Optimization of hydrogenated amorphous silicon p–i–n solar cells with two-step i layers guided by real-time spectroscopic ellipsometry10.1063/1.122194 ↗
7. Stable protocrystalline silicon and unstable microcrystalline silicon at the onset of a microcrystalline regime10.1063/1.1561161 ↗
8. Highly stabilized protocrystalline silicon multilayer solar cell using a silicon-carbide double p-layer structure
9. Unique features of alternately hydrogen-diluted protocrystalline silicon multilayers as wide bandgap and highly stable absorbers of thin-film silicon solar cells10.1016/j.solmat.2013.04.031 ↗
10. Deposition of thin film silicon using the pulsed PECVD and HWCVD techniques10.1016/S0927-0248(02)00280-5 ↗
11. Novel aspects in thin film silicon solar cells—amorphous, microcrystalline and nanocrystalline silicon10.1016/j.tsf.2003.12.023 ↗
12. S.Y. Myong, J.H. Park, S.W. Kwon, Inferior outdoor-exposed performances of encapsulated a-Si:H photovoltaic modules deposited with a high speed, Energy Sci. Eng. 〈http://dx.doi.org/10.1002/ese3.26〉, in press10.1002/ese3.26 ↗
13. a-Si:H/a-Si:H stacked cell from VHF-deposition in a single chamber reactor with 9% stabilized efficiency10.1016/S0927-0248(97)00008-1 ↗
14. Superstrate type flexible thin-film Si solar cells using flexible glass substrates10.1016/j.tsf.2013.11.039 ↗
15. Thin-film silicon-growth process and solar cell application10.1143/JJAP.43.7909 ↗
16. Improvement of pin-type amorphous silicon solar cell performance by employing double silicon-carbide p layer structure10.1063/1.1639140 ↗
17. Natural hydrogen treatment effect during formation of double amorphous silicon-carbide p-layer structures producing high-efficiency pin-type amorphous silicon solar cells10.1063/1.1853492 ↗
18. Double amorphous silicon-carbide p-layer structures producing highly stabilized pin-type protocrystalline silicon multilayer solar cells
19. Silicon-based thin-film solar cells fabricated near phase boundary by VHF-PECVD technique10.1016/j.solmat.2008.01.010 ↗
20. Temperature dependence of the conductivity in large-grained boron-doped ZnO films10.1016/j.solmat.2007.04.022 ↗
21. High efficiency protocrystalline silicon/microcrystalline silicon tandem cell with zinc oxide intermediate layer10.1063/1.2752736 ↗
22. Outdoor testing of PV module temperature and performance under different mounting and operational conditions10.1016/j.solmat.2010.04.022 ↗
23. Long-term performance modeling of amorphous silicon photovoltaic module10.1143/JJAP.36.629 ↗
24. Long-term performance degradation of various kinds of photovoltaic modules under moderate climatic conditions10.1002/pip.1005 ↗
25. T. Ishii, K. Otani, T. Takashima, K. Ikeda, Change in I–V characteristics of thin-film photovoltaic (PV) modules induced by light soaking and thermal annealing effects, Prog. Photovolt.: Res. Appl. 10.1002/pip.2346, in press.10.1002/pip.2346 ↗
26. Deposition of thin film silicon using the pulsed PECVD and HWCVD techniques10.1016/S0927-0248(02)00280-5 ↗
27. Temperature dependence of light-induced degradation in a-Si solar cells10.1016/0379-6787(87)90052-4 ↗
28. Growth study of a-Si:H thin films by hot wire cell PECVD method
29. S. Guha, C.C. Yang, K. Lord, Method for Manufacturing High Efficiency Photovoltaic Devices at Enhanced Deposition Rates, United States Patent US 6,468,829, October 22 2002.
30. A thin-film silicon solar cell and module10.1002/pip.645 ↗
31. Temperature dependence of Si-based thin film solar cells fabricated on the phase of amorphous to microcrystalline silicon transition10.1143/JJAP.46.7212 ↗
32. Antireflective coating using A WO3–TiO2 nanopaticle photocatalytic composition for high efficiency thin-film Si photovoltaic modules10.1016/j.solmat.2013.10.038 ↗