Effect of oligothiophene spacer length on photogenerated charge transfer from perylene diimide to boron-doped diamond electrodes
Source abstract
Abstract
Organic-based photovoltaic devices emerged as a complementary technology to silicon solar cells with specific advantages in terms of cost, ease of deployment, semi-transparency, and performance under low and diffuse light conditions. In this work, thin-film boron-doped diamond (B:NCD) electrodes are employed for their useful op-tical, electronic, and chemical properties, as well as stability and environmental safety. A set of oligothiophene perylene diimide (nT-PDI) donor-acceptor chromophores is designed and synthesized in order to investigate the influence of the oligothiophene spacer length when the nT-PDI molecule is attached to a B:NCD electrode. The chromophores are anchored to the diamond surface via diazonium grafting followed by Sonogashira cross -coupling. X-ray photoelectron spectroscopy shows that the surface coverage decreases with increasing oligo-thiophene length. Density functional theory (DFT/TDDFT) calculations reveal the upright nT-PDI orientation and the most efficient photogenerated charge separation and injection to diamond for elongated oligothiophene chains (8T-PDI). Yet, the maximum photovoltage is obtained for an intermediate oligothiophene length (3T-PDI), providing an optimum between decreasing transport efficiency and increasing efficiency of charge separation and reduced recombination with increasing oligothiophene length. Holes transferred from nT-PDI to diamond persist there even after the illumination is switched off. Such features may be beneficial for application in solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Molecular Junctions and Nanostructures · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Review on dye-sensitized solar cells (DSSCs): advanced techniques and research trends10.1016/j.rser.2016.09.097 ↗
2. Recent progress and utilization of natural pigments in dye sensitized solar cells: a review10.1016/j.rser.2017.04.075 ↗
3. Recent advances in single‐junction organic solar cells
4. Cation effects in p-type dye sensitized solar cells10.1021/acsaem.9b01955 ↗
5. Enhanced photocurrent via π-bridge extension of perylenemonoimide-based dyes for p-type dye-sensitized solar cells and photoelectrochemical cells10.1021/acsomega.8b01910 ↗
6. Growth of diamond particles from methane-hydrogen gas10.1007/BF01203472 ↗
7. Diamond synthesis from gas phase in microwave plasma10.1016/0022-0248(83)90411-6 ↗
8. Synthesis of diamond films in a rf induction thermal plasma10.1063/1.98851 ↗
9. Growth of boron doped diamond films on gold coated substrates with and without gold nanoparticle formation10.1021/acs.cgd.9b00488 ↗
10. The versatility of hot-filament activated chemical vapor deposition10.1016/j.tsf.2006.07.073 ↗
11. Photogenerated charge collection on diamond electrodes with covalently linked chromophore monolayers10.1016/j.electacta.2020.135762 ↗
12. Functionalization of boron-doped diamond with a push–pull chromophore via Sonogashira and CuAAC chemistry10.1039/C8RA07545J ↗
13. Expanding the scope of diamond surface chemistry: Stille and Sonogashira cross-coupling reactions10.1021/acs.jpcc.7b06426 ↗
14. Novel aspects of diamond
15. Thermal properties of diamond/copper composite material10.1016/S0026-2714(03)00215-4 ↗
16. Ultrahard polycrystalline diamond from graphite10.1038/421599b ↗
17. High hole mobility in boron doped diamond for power device applications10.1063/1.3086397 ↗
18. Oxygen-terminated nanocrystalline diamond film as an efficient anode in photovoltaics10.1002/adfm.200902204 ↗
19. Development and application of a labmade apparatus using open-source “arduino” hardware for the electrochemical pretreatment of boron-doped diamond electrodes10.1016/j.electacta.2017.01.180 ↗
20. Diamond thin films: giving biomedical applications a new shine10.1098/rsif.2017.0382 ↗
21. Electron affinity of the bare and hydrogen covered single crystal diamond (111) surface10.1103/PhysRevLett.81.429 ↗
22. Photochemical functionalization of diamond films10.1021/la0112561 ↗
23. Electrochemical modification of boron-doped chemical vapor deposited diamond surfaces with covalently bonded monolayers10.1149/1.1390813 ↗
24. Use of organic materials in dye-sensitized solar cells10.1016/j.mattod.2017.01.012 ↗
25. Phenyl layers on H–Si(111) by electrochemical reduction of diazonium salts: monolayer versus multilayer formation10.1016/S0022-0728(03)00076-7 ↗
26. Suzuki coupling of aryl organics on diamond10.1021/cm703686w ↗
27. Rates of interfacial electron transfer through π-conjugated spacers10.1021/ja972244y ↗
28. Synthesis, electronic structure, molecular packing/morphology evolution, and carrier mobilities of pure oligo-/Poly(alkylthiophenes)10.1021/ja3104796 ↗
29. Oligothiophene semiconductors: synthesis, characterization, and applications for organic devices10.1021/am4060468 ↗
30. New molecular donors with dithienopyrrole as the electron-donating group for efficient small-molecule organic solar cells10.1021/cm5018147 ↗
31. Tuning the optoelectronic properties of nonfullerene electron acceptors10.1002/cphc.201402568 ↗
32. Direct correlation between work function of indium-tin-oxide electrodes and solar cell performance influenced by ultraviolet irradiation and air exposure10.1039/c2cp42448g ↗
33. Electrochemical synthesis and electronic properties of polypyrrole on intrinsic diamond10.1016/j.diamond.2009.01.035 ↗
34. Fujishima · 2005
35. Electron affinity of plasma-hydrogenated and chemically oxidized diamond (100) surfaces10.1103/PhysRevB.64.165411 ↗
36. The ORCA program system10.1002/wcms.81 ↗
37. Multiwfn: a multifunctional wavefunction analyzer10.1002/jcc.22885 ↗
38. On the metric of charge transfer molecular excitations: a simple chemical descriptor10.1021/ct400337e ↗
39. Inhomogeneous electron gas10.1103/PhysRev.136.B864 ↗
40. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
41. Ab initio description of nanodiamonds: a DFT and TDDFT benchmark10.1016/j.diamond.2020.107959 ↗
42. Density-functional exchange-energy approximation with correct asymptotic behavior10.1103/PhysRevA.38.3098 ↗
43. Development of the Colle-Salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
44. Density-functional thermochemistry. III. The role of exact exchange10.1063/1.464913 ↗
45. Efficient structure optimization with second-order many-body perturbation theory: the RIJCOSX-MP2 method10.1021/ct100199k ↗
46. Density-functional theory for time-dependent systems10.1103/PhysRevLett.52.997 ↗
47. Revisiting the electronic nature of nanodiamonds10.1016/j.diamond.2021.108627 ↗
48. The chemistry of C-H bond activation on diamond10.1002/asia.201000027 ↗
49. Heavy‐atom‐free bay‐substituted perylene diimide donor-acceptor photosensitizers10.1002/cphc.202100269 ↗