journal article·2025-04Open access

Solution-processed tungsten diselenide as an inorganic hole transport material for moisture-stable perovskite solar cells in the n-i-p architecture

Sujan Aryal, Anand B. Puthirath, Brendan Jones, Abdulaziz S.R. Bati, Bin Chen, Thomas Mather, Pulickel M. Ajayan, Edward H. Sargent, Anupama B. Kaul

Abstract

Some of the obstacles to the commercialization of perovskite solar cells (PSCs) are their long-term moisture stability and material cost of the constituent layers, such as the commonly used spiro-OMeTAD hole transport layer (HTL). Replacing the spiro-OMeTAD with low-cost inorganic hole transport materials (HTMs) are important to further elevate the attractiveness of PSCs for commercialization. Perovskite-compatible, solution-exfoliated two-dimensional (2D) transition metal dichalcogenides (TMDCs) are being considered as viable candidates for inorganic HTMs. We consider one such TMDC, WSe 2 which was chemically exfoliated using dichlorobenzene (DCB), a perovskite-compatible solvent, as it was integrated with triple cation perovskite absorbers within the solar cell stack. The WSe 2 HTL required heat treatment processes to be maintained below 100 °C in order to preserve the integrity of the underlying perovskite; despite this lower temperature post treatment process, the structural morphology of the film revealed its dense and pinhole-free nature. Temperature-dependent transport studies conducted on the WSe 2 film provided evidence of its semiconducting character and its ability to extract holes well from the underlying triple-cation Cs 0.05FA 0.79MA 0.16PbI 2.45Br 0.55 absorber. The inorganic HTL offered better environmental stability in moisture-rich environments of up to 60 % relative humidity, in comparison to spiro-OMeTAD HTL-based devices which degraded faster as a result of pinholes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Il. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
2. Perovskite-perovskite tandem photovoltaics with optimized band gaps10.1126/science.aaf9717 ↗
3. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
4. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
5. Electro-optics of perovskite solar cells10.1038/nphoton.2014.284 ↗
6. High charge carrier mobilities and lifetimes in organolead trihalide perovskites10.1002/adma.201305172 ↗
7. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
8. The rapid evolution of highly efficient perovskite solar cells10.1039/C6EE03397K ↗
9. Organometal halide perovskite solar cells: degradation and stability10.1039/C5EE02733K ↗
10. Toxicity of organometal halide perovskite solar cells10.1038/nmat4572 ↗
11. Toward lead-free perovskite solar cells10.1021/acsenergylett.6b00499 ↗
12. Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells10.1038/s41467-019-08455-z ↗
13. Dopant-free crossconjugated hole-transporting polymers for highly efficient perovskite solar cells10.1002/advs.201903331 ↗
14. A polymerization-assisted grain growth strategy for efficient and stable perovskite solar cells10.1002/adma.201907769 ↗
15. Metal oxide alternatives for efficient electron transport in perovskite solar cells: beyond TiO2 and SnO210.1039/D0TA07282F ↗
16. Highly stable and efficient planar perovskite solar cells using ternary metal oxide electron transport layers10.1016/j.jpowsour.2019.227362 ↗
17. Functional metal oxides in perovskite solar cells10.1002/cphc.201900447 ↗
18. Highly efficient and stable inverted perovskite solar cell obtained via treatment by semiconducting chemical additive10.1002/adma.201805554 ↗
19. Bifunctional stabilization of all-inorganic α-CsPbI3 perovskite for 17% efficiency photovoltaics10.1021/jacs.8b07927 ↗
20. Thermodynamically stabilized β-CsPbI3–based perovskite solar cells with efficiencies >18%10.1126/science.aav8680 ↗
21. Air-stable n–i–p planar perovskite solar cells using nickel oxide nanocrystals as sole hole-transporting material10.1021/acsaem.9b00603 ↗
22. Molecular engineering of face-on oriented dopant-free hole transporting material for perovskite solar cells with 19% PCE10.1039/C7TA01718A ↗
23. Hole transport materials in conventional structural (n–i–p) perovskite solar cells: from past to the future10.1002/aenm.201903403 ↗
24. Breakthroughs in NiOx-HTMs towards stable, low-cost and efficient perovskite solar cells10.1016/j.nanoen.2018.06.082 ↗
25. Low-cost Cu-based inorganic hole transporting materials in perovskite solar cells: recent progress and state-of-art developments
26. Electronics and optoelectronics of two-dimensional transition metal dichalcogenides10.1038/nnano.2012.193 ↗
27. The role of graphene and other 2D materials in solar photovoltaics
28. Two-dimensional materials in perovskite solar cells10.1016/j.mtener.2018.11.006 ↗
29. Two-dimensional materials for halide perovskite-based optoelectronic devices10.1002/adma.201605448 ↗
30. Recent progress of flexible perovskite solar cells10.1016/j.nantod.2021.101155 ↗
31. Recent progress in electron transport layers for efficient perovskite solar cells10.1039/C5TA09011C ↗
32. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
33. SnO2: a wonderful electron transport layer for perovskite solar cells10.1002/smll.201801154 ↗
34. Photonics and optoelectronics of 2D semiconductor transition metal dichalcogenides10.1038/nphoton.2015.282 ↗
35. CH3NH3PbI3:MoS2 heterostructure for stable and efficient inverted perovskite solar cell10.1016/j.solener.2019.11.030 ↗
36. Measurement of the Optical Dielectric Function of Monolayer Transition-Metal Dichalcogenides: MoS2, MoSe2, WS2, and WSe210.1103/PhysRevB.90.205422 ↗
37. High-mobility and low-power thin-film transistors based on multilayer MoS2 crystals10.1038/ncomms2018 ↗
38. Analytical review of spiro-OMeTAD hole transport materials: paths toward stable and efficient perovskite solar cells10.1002/aesr.202200045 ↗
39. Di; bonaccorso, F. Few-layer MoS2 flakes as active buffer layer for stable perovskite solar cells10.1002/aenm.201600920 ↗
40. Del rio castillo, A. E.; kioseoglou, G.; stratakis, E.; bonaccorso, F.; kymakis, E. Extending the continuous operating lifetime of perovskite solar cells with a molybdenum disulfide hole extraction interlayer10.1002/aenm.201702287 ↗
41. Reduced trap density and mitigating the interfacial losses by placing 2D dichalcogenide material at perovskite/HTM interface in a dopant free perovskite solar cells10.1016/j.nanoen.2020.105292 ↗
42. 21.7% efficiency achieved in planar n–i–p perovskite solar cells via interface engineering with water-soluble 2D TiS210.1039/C8TA11841H ↗
43. Photoelectrical dynamics uplift in perovskite solar cells by atoms thick 2D TiS2 layer passivation of TiO2 nanograss electron transport layer10.1021/acsami.0c20137 ↗
44. Incorporation of two-dimensional WSe2 into MAPbI3 perovskite for efficient and stable photovoltaics10.1021/acs.jpclett.1c02012 ↗
45. Strong light-matter interactions in heterostructures of atomically thin films10.1126/science.1235547 ↗
46. Photonics and optoelectronics of 2D semiconductor transition metal dichalcogenides10.1038/nphoton.2015.282 ↗
47. Two-dimensional atomic crystals10.1073/pnas.0502848102 ↗
48. Optical limiting and theoretical modelling of layered transition metal dichalcogenide nanosheets10.1038/srep14646 ↗
49. Scalable synthesis of few-layered 2D tungsten diselenide (2H-WSe2) nanosheets directly grown on tungsten (W) foil using ambient-pressure chemical vapor deposition for reversible Li-ion storage10.1021/acsomega.0c01155 ↗
50. Anomalous Raman spectra and thickness-dependent electronic properties of WSe210.1103/PhysRevB.87.165409 ↗
51. Self-assembled 2D WSe2 thin films for photoelectrochemical hydrogen production10.1038/ncomms8596 ↗
52. Silver iodide formation in methyl ammonium lead iodide perovskite solar cells with silver top electrodes10.1002/admi.201500195 ↗
53. Iodine migration and degradation of perovskite solar cells enhanced by metallic electrodes10.1021/acs.jpclett.6b02375 ↗
54. Emission spectra and strain-dependent properties of flexible inkjet printed WSe2-graphene heterostructure photodetectors10.1039/D3TC03741J ↗
55. High-Specific-Power flexible transition metal dichalcogenide solar cells10.1038/s41467-021-27195-7 ↗
56. High-performance parallel tandem MoTe2/perovskite solar cell based on reduced graphene oxide as hole transport layer10.1038/s41598-022-25015-6 ↗
57. A dopant-free polymeric hole-transporting material enabled high fill factor over 81% for highly efficient perovskite solar cells10.1002/aenm.201902600 ↗
58. A facilely synthesized ‘spiro’ hole-transporting material based on spiro[3.3]Heptane-2,6-dispirofluorene for efficient planar perovskite solar cells10.1039/C7RA06643K ↗
59. An Fe3O4 based hole transport bilayer for efficient and stable perovskite solar cells10.1039/D3YA00014A ↗
60. NiOx/spiro hole transport bilayers for stable perovskite solar cells with efficiency exceeding 21%10.1021/acsenergylett.9b02112 ↗
61. Enhanced performance of a monolayer MoS2/WSe2 heterojunction as a photoelectrochemical cathode10.1007/s40820-018-0212-6 ↗
62. Hysteresis index: a figure without merit for quantifying hysteresis in perovskite solar cells10.1021/acsenergylett.8b01627 ↗
63. Inhibiting hysteresis and optimizing the performance of perovskite solar cells10.1016/j.solmat.2023.112616 ↗
64. Current density mismatch in perovskite solar cells10.1021/acsenergylett.0c01642 ↗
65. A systematic discrepancy between the short circuit current and the integrated quantum efficiency in perovskite solar cells10.1038/s41467-023-41263-0 ↗
66. Best practices in perovskite solar cell efficiency measurements. Avoiding the error of making bad cells look good10.1021/acs.jpclett.5b00289 ↗
67. Optical property and stability study of CH3(CH2)3NH3)2(CH3NH3)3Pb4I13 ruddlesden popper 2D perovskites for photoabsorbers and solar cells and comparison with 3D MAPbI310.3390/solar2040023 ↗
68. Stability and degradation in triple cation and methyl ammonium lead iodide perovskite solar cells mediated via Au and Ag electrodes10.1038/s41598-022-19541-6 ↗
69. Atomic-scale mapping of hydrophobic layers on graphene and few-layer MoS2 and WSe2 in water10.1038/s41467-019-10740-w ↗
70. Effect of airborne contaminants on the wettability of supported graphene and graphite10.1038/nmat3709 ↗
71. Wetting of mono and few-layered WS2 and MoS2 films supported on Si/SiO2 substrates10.1021/nn5072073 ↗
72. Atmospheric pressure chemical vapor deposition of WSe2 thin films on glass—highly hydrophobic sticky surfaces10.1039/B514440J ↗
73. Consensus Statement for stability Assessment and reporting for perovskite photovoltaics based on ISOS procedures10.1038/s41560-019-0529-5 ↗