journal article·2024-10Open access

Polymer encapsulation impact on potential-induced degradation in PV modules revealed by a multi-modal field study

C. Buerhop, O. Stroyuk, O. Mashkov, A. Barabash, J.A. Hauch, I.M. Peters

Abstract

Potential-induced degradation is a significant issue affecting the performance and reliability of photovoltaic systems, particularly in large-scale installations. Understanding the mechanisms underlying the formation of potential-induced degradation is crucial for developing effective mitigation strategies and ensuring the long-term sustainability of solar energy technologies. During the inspection of a 1.2 MWp photovoltaic power plant, various imaging methods, electrical measurements, spectroscopic characterization methods, and monitoring data analyses were utilized and combined. We observed that two percent of the photovoltaic modules at the string ends exhibited the characteristic checkerboard pattern in infrared or electroluminescence imaging, implicating issues on twelve percent of all strings. This uneven distribution of potential-induced degradation-affected modules suggests additional key factors are at play. Investigations of the backsheet and ethylene-vinyl acetate using near-infrared reflectance analysis revealed that one backsheet type and two different ethylene-vinyl acetate types were present in the installed solar panels. Yet, only one type of ethylene-vinyl acetate correlated with potential-induced degradation. The same type also exhibited a higher rate of oxidative degradation. Scanning electron microscopy and energy-dispersive X-ray spectroscopy revealed a significantly increased sodium ion content in the ethylene-vinyl acetate and glass of the potential-induced degradation-affected modules. Our findings highlight the crucial role of polymer encapsulation in the development of potential-induced degradation and underscore the importance of careful polymer selection in the design of photovoltaic module technologies. • Comprehensive characterization of more than 1000 PV modules in PV power stations. • Analyzing polmers with near infrared spectroscopy. • Correlation of encapsulant polymers with formation of potential induced degradation. • Impact of PID-affected modules on performance of inverters.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Photovoltaic Systems and Sustainability · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Potential induced degradation in photovoltaic modules: a review of the latest research and developments
2. Potential-induced degradation in photovoltaic modules: a critical review10.1039/C6EE02271E ↗
3. Moisture ingress in photovoltaic modules: a review10.1016/j.solener.2021.06.055 ↗
4. Impact of different backsheets and encapsulant types on potential induced degradation (PID) of silicon PV modules10.1016/j.solener.2023.01.047 ↗
5. Properties of encapsulation materials and their relevance for recent field failures
6. Encapsulant selection for PID resistant modules made with heterojunction solar cells
7. Polyolefin as PID-resistant encapsulant material in PV modules10.1016/j.solmat.2015.10.009 ↗
8. Research on potential induced degradation (PID) of polymeric backsheet in PV modules after salt-mist exposure10.1016/j.solener.2019.06.019 ↗
9. Influence of polymer properties on potential induced degradation of PV-modules
10. Experimental investigation of potential induced degradation of poly-crystalline photovoltaic modules: influence of superstrate and encapsulant types
11. Power loss and hotspot analysis for photovoltaic modules affected by potential induced degradation10.1038/s41529-022-00221-9 ↗
12. Dynamics of BS-driven insulation issues solar
13. Field study on the severity of photovoltaic potential induced degradation10.1038/s41598-022-26310-y ↗
14. Buerhop · 2024
15. Nondestructive characterization of polymeric components of silicon solar modules by near-infrared absorption spectroscopy (NIRA)10.1016/j.solmat.2020.110702 ↗
16. Identification of backsheet type of silicon PV modules by fluorescence patterns of EVA encapsulant
17. Wet leakage resistance development of modules with various backsheet types10.1002/pip.3481 ↗
18. Distinguishing between different types of multi-layered PET-based backsheets of PV modules with near-infrared spectroscopy10.1002/pip.3465 ↗
19. An insight into a combined effect of backsheet and EVA encapsulant on field degradation of PV modules10.1002/ese3.1572 ↗
20. Review: ultraviolet fluorescence as assessment tool for photovoltaic modules10.1109/JPHOTOV.2019.2961781 ↗
21. Colvin · 2024
22. Near-infrared spectroscopy of EVA encapsulants as a tool for probing degradation status of silicon PV modules
23. Tammer · 2004
24. Assessing field degradation of PV modules by near-infrared absorption spectroscopy of ethylene vinyl acetate encapsulant
25. Supercharging cell-level potential-induced degradation (PID) testing using a salt-enriched hybrid polymer layer10.1016/j.solmat.2023.112479 ↗
26. Evolution of inverter ground impedances for PV modules with various backsheet types
27. 2013
28. Assessment of string performance using self-referencing method in comparison to performance ratio10.1002/pip.3649 ↗
29. Electrochemical mechanisms of leakage-current-enhanced delamination and corrosion in Si photovoltaic modules10.1016/j.solmat.2018.09.010 ↗