Back contact passivation of Sb2Se3 solar cells via antimony trichloride solution
Source abstract
Abstract
Quasi-one-dimensional antimony selenide (Sb 2Se 3 ) stands out as a promising light-absorbing material known for its non-toxic nature, excellent stability, earth`s abundance, and outstanding optoelectronic performance. However, the surface quality of Sb 2Se 3 thin films is an important factor limiting the efficiency of Sb 2Se 3 solar cells. This article presents a novel approach employing the environmentally friendly and cost-effective inorganic salt, antimony trichloride (SbCl 3), to passivate the surface of Sb 2Se 3 thin films, thus improving the performance of Sb 2Se 3 solar cells. The influence of SbCl 3 passivation on the surface quality of Sb 2Se 3 thin films and the underlying physical mechanisms behind the enhancement of Sb 2Se 3 solar cell performance have been investigated. SbCl 3 passivation can effectively fill the voids between Sb 2Se 3 grains, reduce the surface roughness, and decrease the leakage current of the solar cells. Furthermore, it enhances the light response of the device in the long-wavelength region, reduces the open-circuit voltage losses, effectively lowers the interface recombination rate of charge carriers, and improves carrier transport. As a result of this innovative approach, the efficiency of 6.74% has been recorded. This work provides valuable references for future back contact interface passivation of Sb 2Se 3 solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. A review of thin film solar cell technologies and challenges10.1016/j.rser.2016.12.028 ↗
2. Emerging inorganic compound thin film photovoltaic materials: progress, challenges and strategies10.1016/j.mattod.2020.09.002 ↗
3. All antimony chalcogenide tandem solar cell
4. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
5. Controllable solution‐phase epitaxial growth of Q1D Sb 2 (S,Se) 3/CdS heterojunction solar cell with 9.2% efficiency10.1002/adma.202104346 ↗
6. Efficient and stable all-inorganic Sb2(S, Se)3 solar cells via manipulating energy levels in MnS hole transporting layers10.1016/j.scib.2021.11.012 ↗
7. Molecular beam epitaxy deposition of in situ O‐doped CdS films for highly efficient Sb2(S,Se)3 solar cells
8. Regulating deposition kinetics via a novel additive-assisted chemical bath deposition technology enables fabrication of 10.57%-efficiency Sb 2 Se 3 solar cells10.1039/D2EE02261C ↗
9. Thermal evaporation and characterization of Sb 2 Se 3 thin film for substrate Sb 2 Se 3/CdS solar cells10.1021/am502427s ↗
10. Thermal evaporation–deposited hexagonal CdS buffer layer with improved quality, enlarged band gap, and reduced band gap offset to boost performance of Sb2(S,Se)3 solar cells10.1016/j.jallcom.2022.165885 ↗
11. A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells10.1016/j.solener.2020.03.009 ↗
12. Ten years of Sb 2 Se 3 thin film solar cells10.1002/solr.202200094 ↗
13. Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells10.1016/j.nanoen.2019.04.019 ↗
14. Regulating energy band alignment via alkaline metal fluoride assisted solution post‐treatment enabling Sb 2 (S,Se) 3 solar cells with 10.7% efficiency
15. Solvent‐Assisted hydrothermal deposition approach for highly‐efficient Sb 2 (S,Se) 3 thin‐film solar cells10.1002/aenm.202300391 ↗
16. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
17. High-efficiency Sb2(S,Se)3 solar cells with MoO3 as a hole-transport layer10.1016/j.jallcom.2022.166842 ↗
18. High‐efficiency Sb 2 (S,Se) 3 solar cells with new hole transport layer‐free back architecture via 2D titanium‐carbide mxene
19. Manipulating back contact enables over 8%-efficient carbon-based Sb2(S,Se)3 solar cells10.1016/j.cej.2022.135872 ↗
20. Defect passivation of efficient Sb 2 (S,Se) 3 solar cells with ultrathin, insulating polymers10.1002/solr.202200376 ↗
21. 7.5% n–i–p Sb 2 Se 3 solar cells with CuSCN as a hole-transport layer10.1039/C9TA01773A ↗
22. An electrochemically neutralized energy-assisted low-cost acid-alkaline electrolyzer for energy-saving electrolysis hydrogen generation10.1039/C7TA10374C ↗
23. Stable and efficient CdS/Sb2Se3 solar cells prepared by scalable close space sublimation10.1016/j.nanoen.2018.04.044 ↗
24. Alternative back contacts for Sb2Se3 solar cells10.1016/j.solener.2019.02.050 ↗
25. Back contact interfacial modification in highly-efficient all-inorganic planar n-i-p Sb 2 Se 3 solar cells10.1021/acsami.0c10629 ↗
26. 6.5% certified efficiency Sb 2 Se 3 solar cells using PbS colloidal quantum dot film as hole-transporting layer10.1021/acsenergylett.7b00648 ↗
27. Enhancement in the efficiency of Sb 2 Se 3 thin-film solar cells by increasing carrier concertation and inducing columnar growth of the grains
28. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
29. All‐vacuum‐processed Sb 2 (S,Se) 3 thin film photovoltaic devices via controllable tuning seed orientation10.1002/adfm.202370136 ↗
30. Interfacial engineering by applying double CdS structure electron transport layer for high-performance Sb2(S,Se)3 solar cells10.1016/j.ceramint.2023.04.079 ↗
31. Improving the performance of Sb2S3 thin-film solar cells by optimization of VTD source-substrate proximity10.1016/j.solener.2021.03.052 ↗
32. Optimisation of Sb2S3 thin-film solar cells via Sb2Se3 post-treatment10.1016/j.jpowsour.2022.232451 ↗
33. Structures of Cu(In,Ga)(S,Se) 2 solar cells for minimizing open‐circuit voltage deficit: investigation of carrier recombination rates
34. Determining interface properties limiting open-circuit voltage in heterojunction solar cells10.1063/1.4982752 ↗
35. Fabricating over 7%-efficient Sb2(S,Se)3 thin-film solar cells by vapor transport deposition using Sb2Se3 and Sb2S3 mixed powders as the evaporation source10.1016/j.jpowsour.2021.229737 ↗
36. Determining interface properties limiting open-circuit voltage in heterojunction solar cells10.1063/1.4982752 ↗
37. 5.91%-efficient Sb2Se3 solar cells with a radio-frequency magnetron-sputtered CdS buffer layer10.1016/j.apmt.2019.06.001 ↗
38. Lowest open‐circuit voltage deficit achievement to attain high efficient antimony selenosulfide solar cells
39. Vapor transport deposition of highly efficient Sb 2 (S,Se) 3 solar cells via controllable orientation growth
40. Back contact interfacial modification mechanism in highly-efficient antimony selenide thin-film solar cells10.1016/j.jechem.2023.01.049 ↗
41. Efficient double buffer layer Sb 2 (Se x S 1–x) 3 thin film solar cell via single source evaporation10.1002/solr.201800144 ↗
42. Crystallographic orientation control and defect passivation for high-efficient antimony selenide thin-film solar cells10.1016/j.mtphys.2022.100772 ↗
43. Oxygen content modulation toward highly efficient Sb 2 Se 3 solar cells10.1021/acsami.2c18735 ↗
44. Vapor transport deposition of Sb 2 (S,Se) 3 solar cells with continuously tunable band gaps10.1021/acsaem.2c00790 ↗
45. Chemical etching of Sb 2 Se 3 solar cells: surface chemistry and back contact behaviour
46. Accelerated optimization of TiO 2/Sb 2 Se 3 thin film solar cells by high-throughput combinatorial approach10.1002/aenm.201700866 ↗