journal article·2023-08

Improving quality of cast monocrystalline Si ingot with seed crystal strips and graphite soft felt

Hongrong Chen, Jinbing Zhang, Dongli Hu, Shuai Yuan, Chen Wang, Deren Yang

Publisher page

Abstract

A combination of the two techniques, one that employs seed crystal strips and the other that makes use of graphite soft felts have been proposed and studied to improve the casting process of monocrystalline Si (mono-Si) ingots. The evolution of the melting process of Si seed crystals and the growth of edge Si muliticrystals during the cast of mono-Si ingot has been investigated in detail. The results of the study indicated that these two changes increased the proportion of full mono-Si wafers substantially and led to a considerable reduction in the average dislocation ratio of edge Si bricks based on cast mono-Si ingot. Solar cell devices fabricated based on cast mono-Si ingot with the above two improvement measures exhibited enhancement in their overall photoelectric conversion efficiency ( η ) by 0.29% and 0.64% (absolute value), in comparison to the solar cells based on mono-Si ingot that was cast using only the seed crystal strips and the conventional ingot, respectively. Therefore, the study provides sufficient evidence that utilization of seed crystal strips and graphite soft felts in combination with each other as supplementary measures to the casting process of mono-Si ingot can be scaled up to be used in the photovoltaic production line for the development of solar cells with higher performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic Systems and Sustainability · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Higher quality composite silicon ingot with monocrystalline and multicrystalline bricks10.1016/j.solener.2022.08.068 ↗
2. Growth of low-cost and high-quality monocrystalline silicon ingots by using split recycled seeds10.1016/j.mssp.2021.106318 ↗
3. Investigation of subgrains in directionally solidified cast mono-seeded silicon and their interactions with twin boundaries10.1016/j.solmat.2020.110817 ↗
4. K. E. Ekstrøm, G. Stokkan, R. Søndenå, H. Dalaker, T. Lehmann, L. Arnberg, M. Di Sabatino. Structure and dislocation development in mono-like silicon. Phys. Status Solidi, 212, 2278-2288.10.1002/pssa.201532105 ↗
5. Higher quality monolike cast silicon with induced grain boundaries10.1016/j.solmat.2015.03.027 ↗
6. Mono-like silicon growth using functional grain boundaries to limit area of multicrystalline grains10.1109/JPHOTOV.2013.2281730 ↗
7. About the origin of low wafer performance and crystal defect generation on seed-cast growth of industrial mono-like silicon ingots10.1002/pip.2344 ↗
8. Control of dislocation clusters by artificially-introduced micro-twins in cast-mono silicon10.1016/j.jcrysgro.2022.126820 ↗
9. Impact of seed orientation on dislocation propagation in cast seed-assisted monocrystalline silicon10.1016/j.solmat.2021.111084 ↗
10. Impact of silicon melt infiltration on the quality of cast crystalline silicon10.1016/j.solener.2021.07.062 ↗
11. Suppress of dislocations induced by feedstocks weight in cast-mono crystalline silicon10.1016/j.solener.2021.05.035 ↗
12. Seed manipulation for artificially controlled defect technique in new growth method for quasi-monocrystalline Si ingot based on casting
13. Mono-like silicon growth using functional grain boundaries to limit area of multicrystalline grains10.1109/JPHOTOV.2013.2281730 ↗
14. Suppression of dislocations and twins by inducing asymmetrical grain boundaries for casting high-quality monocrystalline silicon ingot10.1016/j.vacuum.2022.111533 ↗
15. Study on growth behavior of twins in cast monocrystalline silicon
16. Defect formation induced by seed-joints during directional solidification of quasi-mono-crystalline silicon ingots10.1016/j.jcrysgro.2014.08.002 ↗
17. Dislocation formation in seeds for quasi-mono crystalline silicon for solar cells10.1016/j.actamat.2013.12.010 ↗
18. Concept and method to create a distinct low-temperature region in a Si melt for growth of a Si single ingot with a large diameter ratio using the noncontact crucible method10.1016/j.jcrysgro.2018.07.031 ↗