Regulated oxidation and moisture permeation via sulfinic acid based additive enables highly efficient and stable tin-based perovskite solar cells
Source abstract
Abstract
The exceptional photovoltaic properties of Sn-based perovskite solar cells (Sn–PSCs) have caught the interest of researchers as a potential candidate for the development of non-toxic PSCs. Nevertheless, the Sn–PSCs still face some critical drawbacks, such as the easier oxidation of Sn 2+ to Sn 4+ and the moisture permeation, which reduce their stability and power conversion efficiency (PCE). In this work, to tackle these limitations, we added a Lewis base additive formamidinesulfinic acid (FASO 2H) to the perovskite precursor solution. The FASO 2H Lewis base additive could successfully reduce the oxidation of Sn 2+/Sn 4+ by 32%, improved the crystallinity and decreased the lattice strain by 66% in the respective films. As a result, the charge carrier recombination minimized and the FASnI 3-FASO 2H (3 mol%) based PSCs produced a PCE of 7.44%. The FASO 2H additive also offers superior moisture protection for Sn–PSCs thanks to its hydrophobic sulfinic acid group. Notably, the Sn–PSCs exhibit a high light soaking stability by maintaining 90% of the initial PCE up to 450 h when tested under maximum power point tracking conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Single-layer ZnO hollow hemispheres enable high-performance self-powered perovskite photodetector for optical communication10.1007/s40820-021-00596-5 ↗
2. Welding perovskite nanowires for stable, sensitive, flexible photodetectors10.1021/acsnano.9b09315 ↗
3. Ultrasensitive, flexible perovskite nanowire photodetectors with long‐term stability exceeding 5000 h10.1002/inf2.12320 ↗
4. A review on scaling up perovskite solar cells
5. Recycling and recovery of perovskite solar cells, Mater
6. High‐ efficiency tin halide perovskite solar cells: the chemistry of tin (II) compounds and their interaction with Lewis base additives during perovskite film formation10.1002/solr.202000606 ↗
7. Tin halide perovskites: from fundamental properties to solar cells10.1002/adma.202105844 ↗
8. Advances in tin (II)‐ based perovskite solar cells: from material physics to device performance10.1002/sstr.202100102 ↗
9. Interfaces, pseudohalide anions to suppress oxidative degradation for efficient formamidinium-based Sn–Pb halide perovskite solar cells10.1021/acsami.1c23949 ↗
10. Strategies to improve performance and stability for tinbased perovskite solar cells10.1021/acsenergylett.9b01179 ↗
11. Enhanced photovoltaic performance via a bifunctional additive in tinbased perovskite solar cells10.1021/acsaem.1c02488 ↗
12. Strategies for improving the stability of tin‐ based perovskite (ASnX3) solar cells10.1002/advs.201903540 ↗
13. Slow surface passivation and crystal relaxation with additives to improve device performance and durability for tin-based perovskite solar cells10.1039/C8EE00956B ↗
14. Formamidine sulfinic acid as a biochemical reducing agent10.1021/bi00899a021 ↗
15. Interdependent lateral interactions, hydrophobicity and acid strength and their influence on the catalytic activity of nanoporous sulfonic acid silicas10.1039/c0gc00045k ↗
16. All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm2 using surface-anchoring zwitterionic antioxidant10.1038/s41560-020-00705-5 ↗
17. Antioxidation and energy-level alignment for improving efficiency and stability of hole transport layer-free and methylammonium-free tin–lead perovskite solar cells10.1021/acsami.1c12180 ↗
18. Post‐ deposition vapor annealing enables fabrication of 1 cm2 lead‐ free perovskite solar cells10.1002/solr.201970114 ↗
19. Diaminomaleonitrile Lewis base additive for push–pull electron extraction for efficient and stable tin-based perovskite solar cells10.1021/acsaem.1c02320 ↗
20. An investigation into the structure and chemical properties of formamidine sulfinic acid10.1366/13-07306 ↗
21. Development of hybrid pseudohalide tin perovskites for highly stable carbon-electrode solar cells10.1021/acsami.0c03704 ↗
22. Highly stable and efficient FASnI3‐ based perovskite solar cells by introducing hydrogen bonding10.1002/adma.201903721 ↗
23. Constructing water-resistant CH3NH3PbI3 perovskite films via coordination interaction10.1039/C6TA06892H ↗
24. Templated growth of FASnI3 crystals for efficient tin perovskite solar cells10.1039/D0EE01845G ↗
25. Chemical passivation of the under coordinated Pb2+ defects in inverted planar perovskite solar cells via β-diketone Lewis base additives, Photochem10.1007/s43630-021-00023-z ↗
26. Correlation between full width at half maximum (FWHM) of XRD peak with residual stress on ground surfaces10.1080/14786435.2012.704429 ↗
27. Strain in perovskite solar cells: origins, impacts and regulation10.1093/nsr/nwab047 ↗
28. Strain engineering in perovskite solar cells and its impacts on carrier dynamics
29. Thermal unequilibrium of strained black CsPbI3 thin films10.1126/science.aax3878 ↗
30. Strained hybrid perovskite thin films and their impact on the intrinsic stability of perovskite solar cells
31. Relationship between lattice strain and efficiency for Sn-perovskite solar cells10.1021/acsami.9b09564 ↗
32. Recent progress in inorganic tin perovskite solar cells
33. How SnF2 impacts the material properties of lead-free tin perovskites10.1021/acs.jpcc.8b01045 ↗