journal article·2023-03Open access

Ultrasonic guided waves interaction with cracks in the front glass of thin-film solar photovoltaic module

Dicky Silitonga, Nico F. Declercq, Pascal Pomarède, Fodil Meraghni, Bertrand Boussert, Pooja Dubey

Abstract

As the solar photovoltaics power system sees rapid growth in installed capacity and plays a significant role in the future global energy mix, its reliability becomes a crucial factor in maintaining the stability of the electricity supply. Manufacturing imperfections and harsh operating environments may compromise the module’s structural integrity, leading to performance deterioration and power loss. Therefore, nondestructive inspection becomes an indispensable part of the quality assurance or maintenance program to detect defects at any stage of the module’s lifecycle. Ultrasound is an essential method for material inspection, and ultrasonic-guided waves have been long explored as a flaw detection technique on plate-like structures, taking advantage of its long-range detection that yields an efficient inspection process superior to the conventional pulse-echo technique. Inspired by the same idea, this work assesses the prospect of harnessing ultrasonic guided waves, particularly Lamb waves, to detect cracks, as they exist in an actual module. However, unlike the commonly investigated plates, solar photovoltaic modules contain stacks of a-few-microns-thick layers of different materials that add complexities to the structure. The investigated specimen is a thin film photovoltaic module with cracks caused during transportation and handling. It, therefore, represents a real-life research case that may occur in situ. Numerical and experimental methods are performed to reveal various Lamb modes that propagate in the structure, where the results of both methods are mutually confirmed. Unlike other works, this investigation is not confined to the utilization of the non-dispersive mode but attempts to find the defect-sensitive mode that can be used to detect cracks. An analysis of the experimental results reveals the mode most sensitive to cracks, while numerical simulations explain the corresponding phenomena.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Thermography and Photoacoustic Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Solar PV – Analysis, IEA. (n.d.). https://www.iea.org/reports/solar-pv (accessed August 16, 2022).
2. Techno-economic performance comparison of crystalline and thin film PV panels under varying meteorological conditions: a high solar resource southern hemisphere case, Appl
3. Tandem amorphous/microcrystalline silicon thin-film solar modules: developments of novel technologies10.1016/j.solener.2018.05.060 ↗
4. Significant improvement of conversion efficiency by passivation of low-angle grain boundaries in flexible low-cost single-crystal-like GaAs thin-film solar cells directly deposited on metal tape, Sol. Energy Mater
5. IRENA · 2019
6. Early degradation of silicon PV modules and guaranty conditions10.1016/j.solener.2011.06.011 ↗
7. Infrared thermography based defects testing of solar photovoltaic panel with fuzzy rule-based evaluation10.3390/en13061343 ↗
8. A comprehensive study on different types of faults and detection techniques for solar photovoltaic system, Sol
9. The interaction of Lamb waves with defects, IEEE Trans. Ultrason. Ferroelectr. Freq
10. Minimum variance guided wave imaging in a quasi-isotropic composite plate10.1088/0964-1726/20/2/025013 ↗
11. Sizing of impact damages in composite materials using ultrasonic guided waves10.1016/j.ndteint.2011.10.002 ↗
12. An approach to guided wave mode selection for inspection of laminated plate10.1177/073168449301200504 ↗
13. Guided waves for structural health monitoring in composites: a review and implementation strategies10.1016/j.paerosci.2021.100790 ↗
14. The propagation of coupled Lamb waves in multilayered arbitrary anisotropic composite laminates,10.1016/j.jsv.2013.08.035 ↗
15. Towards improved cover glasses for photovoltaic devices10.1002/pip.3334 ↗
16. Fluorine doped tin oxide as an alternative of indium tin oxide for bottom electrode of semi-transparent organic photovoltaic devices10.1063/1.5104333 ↗
17. Thin films for advanced glazing applications10.3390/buildings6030037 ↗
18. Development of semi-transparent ZnO/FTO solar thermoelectric nanogenerator for energy efficient glazing10.1016/j.solener.2019.04.002 ↗
19. Efficiency improvement of CIGS solar cells by a modified rear contact10.1016/j.solener.2017.08.054 ↗
20. Investigation of metal-nickel oxide contacts used for perovskite solar cell10.1063/1.5063475 ↗
21. A study on utilizing different metals as the back contact of CH3NH3PbI3 perovskite solar cells,10.1039/C6TA05938D ↗
22. The photovoltaic cell based on CIGS: principles and technologies,10.3390/ma15051908 ↗
23. Large area copper plated silicon solar cell exceeding 19.5% efficiency10.1016/j.egypro.2012.05.008 ↗
24. Crystalline silicon solar cells with nickel/copper contacts
25. A two-dimensional Fourier transform method for the measurement of propagating multimode signals,10.1121/1.400530 ↗
26. Review on the sources of power loss in monofacial and bifacial photovoltaic technologies10.3390/en14237935 ↗
27. Micro crack detection of multi-crystalline silicon solar wafer using machine vision techniques10.1108/02602281111110013 ↗
28. Piezoacoustic wave spectra using improved surface impedance matrix: application to high impedance-contrast layered plates10.1121/1.2836756 ↗
29. Optimization of lamb wave inspection techniques10.1016/0963-8695(92)90003-Y ↗
30. Low-frequency reflection characteristics of the s0 Lamb wave from a rectangular notch in a plate10.1121/1.1424866 ↗
31. The low frequency reflection characteristics of the fundamental antisymmetric Lamb wave a0 from a rectangular notch in a plate,10.1121/1.1512702 ↗
32. Circular sensing networks for guided waves based structural health monitoring, Mech10.1016/j.ymssp.2015.05.001 ↗
33. Cirtautas · 2022 · 20
34. Circumferential higher order guided wave modes for the detection and sizing of cracks and pinholes in pipe support regions10.1016/j.ndteint.2007.07.004 ↗
35. Selective generation of lamb wave modes in a finite-width plate by angle-beam excitation method10.3390/s20143868 ↗
36. Xue · 2022 · 13