Consumable CdS nanolayer enables increased performance in kesterite solar cells
Source abstract
Abstract
Although the ohmic-contact and electrostatic field can be regulated by the intermediate layer for efficient carrier extraction, challenges remain in high-quality back contact as well as improved quality of crystallized CZTSSe absorber layer simultaneously. Here, we introduce a controllable CdS nanolayer prepared by the chemical bath deposition (CBD) process between the CZTS precursors and Mo back contact. The results disclose that the surface chemistry of the naked Mo film can be modified by the formed CdS nanolayer and thus MoS 2 complex during the chemical bath process. However, such CdS nanolayer and MoS 2 complex can be readily consumed during the following selenization process, without deteriorating the ohmic-back contact. Simultaneously, the as-grown CZTSSe absorber is not only with high crystallinity and less composition fluctuations, but also doped by Cd 2+ . Subsequently the efficiency of CZTSSe solar cells is increased by 26% as CdS nanolayer is introduced. This work provides a cost-effective and universal approach to design and modify the interface or surface of photovoltaic and photoelectrochemical devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
2. High efficiency Cu2ZnSn(S,Se)4 solar cells by applying a double In2S3/CdS emitter10.1002/adma.201402373 ↗
3. Interfacial engineering of wide‐bandgap perovskites for efficient perovskite/CZTSSe tandem solar cells
4. Flexible Cu2ZnSn(S,Se)4 solar cells with over 10% efficiency and methods of enlarging the cell area10.1038/s41467-019-10890-x ↗
5. Novel symmetrical bifacial flexible CZTSSe thin film solar cells for indoor photovoltaic applications10.1038/s41467-021-23343-1 ↗
6. Cd-free Cu(in,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.3510.1109/JPHOTOV.2019.2937218 ↗
7. Is the Cu/Zn disorder the main culprit for the voltage deficit in kesterite solar cells?10.1002/aenm.201502276 ↗
8. Fill factor losses in Cu2ZnSn(SxSe1−x)4 solar cells: insights from physical and electrical characterization of devices and exfoliated films10.1002/aenm.201501609 ↗
9. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
10. Strategic review of interface carrier recombination in earth abundant Cu–Zn–Sn–S–Se solar cells: current challenges and future prospects10.1039/C6TA10543B ↗
11. A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/ja308862n ↗
12. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
13. Inhibiting the absorber/Mo-back contact decomposition reaction in Cu2ZnSnSe4 solar cells: the role of a ZnO intermediate nanolayer10.1039/c3ta11419h ↗
14. Rear interface modification by the ZnTe layer enables high-efficient Cu2(Zn,Cd)SnS4 thin-film solar cells10.1021/acsaem.1c03104 ↗
15. Beyond 8% ultrathin kesterite Cu2ZnSnS4 solar cells by interface reaction route controlling and self-organized nanopattern at the back contact10.1038/am.2017.103 ↗
16. Modification of back contact in Cu2ZnSnS4 solar cell by inserting Al-doped ZnO intermediate layer10.1021/acsami.0c18799 ↗
17. Nanoscale rear-interface passivation in Cu2ZnSn(S,Se)4 solar cells through the CuAlO2 intermediate layer10.1021/acsaem.1c00743 ↗
18. The importance of back contact modification in Cu2ZnSnSe4 solar cells: the role of a thin MoO2 layer10.1016/j.nanoen.2016.06.034 ↗
19. Eliminating multi-layer crystallization of Cu2ZnSn(S,Se)4 absorber by controlling back interface reaction10.1016/j.nanoen.2020.105042 ↗
20. Characterization of TiN back contact interlayers with varied thickness for Cu2ZnSn(S,Se)4 thin film solar cells10.1016/j.tsf.2017.08.030 ↗
21. Effect of a graphene oxide intermediate layer in Cu2ZnSn(S,Se)4 solar cells10.1039/C9TA13080B ↗
22. Back contact engineering for increased performance in kesterite solar cells10.1002/aenm.201602585 ↗
23. Complex surface chemistry of kesterites: Cu/Zn reordering after low temperature postdeposition annealing and its role in high performance devices10.1021/acs.chemmater.5b01473 ↗
24. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
25. Band-gap-graded Cu2ZnSn(S,Se)4 drives high efficient solar cells10.1039/D1EE03134A ↗
26. Two-step annealing CZTSSe/CdS heterojunction to improve interface properties of kesterite solar cells10.1021/acsami.1c18152 ↗
27. Insight into the role of post-annealing in air for high efficient Cu2ZnSn(S,Se)4 solar cells10.1016/j.solmat.2018.03.029 ↗
28. Device postannealing enabling over 12% efficient solution-processed Cu2ZnSnS4 solar cells with Cd2+ substitution10.1002/adma.202000121 ↗
29. Lithium-doped Cu2ZnSnS4 superstrate solar cells with 5% efficiency – an alternative to thin film kesterite photovoltaics10.1016/j.nanoen.2018.08.049 ↗
30. Nanoengineering of the Cu2ZnSnS4–TiO2 interface via atomic layer deposition of Al2O3 for high sensitivity photodetectors and solid state solar cells10.1039/C8TA02966K ↗
31. Effect of Cd on cation redistribution and orderdisorder transition in Cu2(Zn,Cd)SnS410.1039/C9TA09572A ↗
32. Suppressed deep traps and bandgap fluctuations in Cu2CdSnS4 solar cells with ≈8% efficiency10.1002/aenm.201902509 ↗
33. Cation substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗
34. Beyond 11% efficient sulfide kesterite Cu2ZnxCd1–xSnS4 solar cell: effects of cadmium alloying10.1021/acsenergylett.7b00129 ↗
35. Control of defect states of kesterite solar cells to achieve more than 11% power conversion efficiency10.1021/acsaem.0c01141 ↗
36. Beyond 11% efficient Cu2ZnSn(Se,S)4 thin film solar cells by cadmium alloying10.1016/j.solmat.2017.09.043 ↗
37. Improving the performance of solution-processed Cu2ZnSn(S,Se)4 photovoltaic materials by Cd2+ substitution10.1021/acs.chemmater.6b02111 ↗
38. Enhancing the photovoltaic performance of Cu2ZnSn(S,Se)4 solar cells with Ba trace doping: large chemical mismatch cation incorporation10.1002/solr.202100607 ↗
39. Understanding the effects of Cd and Ag doping in Cu2ZnSnS4 solar cells10.1021/acs.chemmater.8b00677 ↗
40. CdS nanowires decorated with ultrathin MoS2 nanosheets as an efficient photocatalyst for hydrogen evolution10.1002/cssc.201501544 ↗
41. Mechanism of chemical bath deposition of cadmium sulfide thin films in the ammonia‐thiourea system in situ kinetic study and modelization10.1149/1.2221111 ↗
42. Chemical bath deposition of CdS thin films: an approach to the chemical mechanism through study of the film microstructure10.1149/1.1838140 ↗
43. XPS and XRD study of photoconductive CdS films obtained by a chemical bath deposition process10.1039/jm9960600377 ↗
44. Effects of surface modification on photocatalytic activity of CdS nanocrystals studied by photoluminescence spectroscopy10.1039/C2CP41153A ↗
45. Adjustment of alkali element incorporations in Cu(In,Ga)Se2 thin films with wet chemistry Mo oxide as a hosting reservoir10.1016/j.solmat.2017.08.022 ↗
46. MoO2 sacrificial layer for optimizing back contact interface of Cu2ZnSn(S,Se)4 solar cells10.1109/JPHOTOV.2020.2987165 ↗
47. Structural and optical properties of electrodeposited molybdenum oxide thin films10.1016/j.apsusc.2005.10.016 ↗
48. Sol–gel synthesized, low-temperature processed, reduced molybdenum peroxides for organic optoelectronics applications10.1039/C4TC00301B ↗
49. Chemical bath deposition of ZnSe and CuSe thin films using N,N-dimethylselenourea10.1149/1.2054814 ↗
50. Polarized Raman scattering analysis of Cu2ZnSnSe4 and Cu2ZnGeSe4 single crystals
51. Raman scattering analysis of the surface chemistry of kesterites: impact of post-deposition annealing and Cu/Zn reordering on solar cell performance10.1016/j.solmat.2016.07.009 ↗
52. Influence of compositionally induced defects on the vibrational properties of device grade Cu2ZnSnSe4 absorbers for kesterite based solar cells10.1063/1.4913262 ↗
53. Identifying the real minority carrier lifetime in nonideal semiconductors: a case study of kesterite materials10.1002/aenm.201700167 ↗
54. Comparative study of the luminescence and intrinsic point defects in the kesterite Cu2ZnSnS4 and chalcopyrite Cu(In,Ga)Se2 thin films used in photovoltaic applications10.1103/PhysRevB.84.165324 ↗
55. Photovoltaic materials and devices based on the alloyed kesterite absorber (AgxCu1-x)2ZnSnSe410.1002/aenm.201502468 ↗
56. Efficiency limitations for wide-band-gap chalcopyrite solar cells10.1016/j.tsf.2004.11.018 ↗
57. Band alignment at the Cu2ZnSn(SxSe1−x)4/CdS interface10.1063/1.3600776 ↗
58. Electronic properties of CuGaSe2-based heterojunction solar cells. Part I. Transport analysis10.1063/1.371903 ↗
59. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells, Appl