Optimizing phosphorus-doped polysilicon in TOPCon structures using silicon oxide layers to improve silicon solar cell performance
Source abstract
Abstract
Tunnel Oxide Passivated Contact (TOPCon) technology is one of the most influential and industrially viable solar cell technologies available today. Improving the quality of passivation contact has become a central focus of current research. Although the conventional monolayer polycrystalline silicon method is highly effective in TOPCon solar cells, it is limited by doping inhomogeneity, which impairs the passivation and electrical properties, and the cell`s photovoltaic conversion efficiency remains suboptimal. To address this issue, this study investigates the deposition of two layers of silicon oxide and two layers of in-situ doped phosphorus amorphous silicon, termed double poly-Si/SiO x structures, on n-type silicon wafers using plasma-enhanced chemical vapor deposition (PECVD). The effectiveness of the structure was confirmed through various characterization techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Key findings indicate that the double-polysilicon structure significantly enhances the uniformity of phosphorus doping, improving the carrier lifetime of the cell and reducing the contact resistance. As a result, the average efficiency in the final production stage has a conversion efficiency gain of 0.23 % over the baseline group. This study underscores the potential of this PECVD methodology to advance the fabrication of high-efficiency solar cells by providing significant improvements in passivation, doping uniformity, and overall cell performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Advancements in Semiconductor Devices and Circuit Design · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Impact of phosphorus diffusion on n-type poly-Si based passivated contact silicon solar cells10.1016/j.solmat.2019.110120 ↗
2. Passivation quality control in poly-Si/SiOx/c-Si passivated contact solar cells with 734 mV implied open circuit voltage10.1016/j.solmat.2018.09.013 ↗
3. Ieee, development of machine vision system for detection of Wrap-around in n-TOPCon solar cells
4. Chen · 2023
5. Current status and challenges for hole-selective poly-silicon based passivating contacts10.1063/5.0185379 ↗
6. On the limiting efficiency for silicon heterojunction solar cells10.1016/j.solmat.2021.111291 ↗
7. Highly improved passivation of PECVD p-type TOPCon by suppressing plasma-oxidation ion-bombardment-induced damages10.1016/j.solener.2022.07.003 ↗
8. High-efficiency n-TOPCon bifacial solar cells with selective poly-Si based passivating contacts10.1016/j.solmat.2023.112458 ↗
9. TOPCon silicon solar cells with selectively doped PECVD layers realized by inkjet-printing of phosphorus dopant sources10.1109/JPHOTOV.2021.3129073 ↗
10. X. Zhang, L. Li, P. Shen, Z. Li, G. He, S. Zhang, B. Yu, J. Wang, D. Zhang, L. Liu, B. Zhang, Q. Yu, L. Cheng, Processing method of N-type TOPCon battery coating bad sheet, involves soaking first acid washing bad sheet into mixed acid solution of hydrofluoric acid and hydrochloric acid for acid washing, and washing with water after acid washing, in, Yingli Energy Dev Co Ltd; Yingli Energy Dev Baoding Co Ltd.
11. Simulation and optimization of polysilicon thin film deposition in a 3000 mm tubular LPCVD reactor10.1016/j.solener.2023.02.044 ↗
12. Atomic scale controlled tunnel oxide enabled by a novel industrial tube-based PEALD technology with demonstrated commercial TOPCon cell efficiencies > 2410.1002/pip.3627 ↗
13. 24.4% industrial tunnel oxide passivated contact solar cells with ozone-gas oxidation Nano SiOx and tube PECVD prepared in-situ doped polysilicon10.1016/j.solmat.2022.111803 ↗
14. Innovative passivating contact using quantum well at poly-Si/c-Si interface for crystalline silicon solar cells
15. Quantum-well passivating contact at polysilicon/crystalline silicon interface for crystalline silicon solar cells
16. Bi-layer in-situ phosphorus doped poly-Si films by PECVD for blistering-free high-efficiency industrial TOPCon solar cells10.1016/j.solmat.2024.112771 ↗
17. Silver metallization with controlled etch stop using SiOx layers in passivating contacts for improved silicon solar cell performance10.1002/solr.202300491 ↗
18. Comparison of C-, N-, and O-incorporated non-blistering PECVD Si films for application in SiOx-based passivating contacts for Si solar cells10.1021/acsaem.2c01631 ↗
19. Thermal laser separation and high-throughput layer deposition for edge passivation for TOPCon shingle solar cells
20. Contactless determination of current-voltage characteristics and minority-carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
21. Ieee, why and how to measure the non-metallized contact resistivity of a passivating contact
22. Quantitative surface analysis by Auger and x-ray photoelectron spectroscopy10.1016/0079-6816(96)00008-1 ↗
23. Ramstedt · 2019
24. Calculated SPIN-orbit splittings of some group IV, III-V, and II-VI semiconductors
25. Chemical bonding states and dopant redistribution of heavily phosphorus-doped epitaxial silicon films: effects of millisecond laser annealing and doping concentration10.1016/j.apsusc.2019.144447 ↗
26. Chemical state analysis of heavily phosphorus-doped epitaxial silicon films grown on Si (100) by X-ray photoelectron spectroscopy10.1016/j.apsusc.2018.02.203 ↗
27. Elemental binding-energies for X-ray photoelectron-spectroscopy10.1016/0169-4332(95)00027-5 ↗
28. Measurement of poly-Si film thickness on textured surfaces by X-ray diffraction in poly-Si/SiOx passivating contacts for monocrystalline Si solar cells10.1016/j.solmat.2021.111510 ↗
29. Effect of crystallographic orientation and nanoscale surface morphology on poly-Si/SiOx contacts for silicon solar cells10.1021/acsami.9b11889 ↗
30. Thermal oxidation effect on structural and optical properties of heavily doped phosphorus polycrystalline silicon films10.1007/s00339-011-6332-1 ↗
31. High-resolution characterization of the forbidden Si 200 and Si 222 reflections10.1107/S1600576715004732 ↗
32. Modeling of a-Si/poly-Si and a-Si/poly-Si/poly-Si stacked solar cells10.1016/S0927-0248(02)00200-3 ↗
33. Comparison of firing stability between p- and n-type polysilicon passivating contacts10.1002/pip.3544 ↗
34. Boron-doped polysilicon using spin-on doping for high-efficiency both-side passivating contact silicon solar cells10.1002/pip.3648 ↗
35. Pre-annealing for improved LPCVD deposited boron-doped poly-Si hole-selective contacts10.1016/j.solmat.2022.112123 ↗
36. Grain-Growth in boron doped LPCVD polysilicon films10.1557/JMR.1990.0360 ↗