Influence of the electron transport layer coating technique on sputter damage and its curing in inverted semi-transparent perovskite solar cells without protective buffer layer
Source abstract
Abstract
In semi-transparent perovskite solar cells (PSCs) comprising a sputtered top electrode, the minimisation of detrimental sputter damage and/or its curing by post-processing treatment is essential to reach high efficiencies. In this work, we investigate the influence of sputter damage and post-deposition annealing steps for different electron transport layers (ETLs) in PSCs without the need of a protective buffer layer such as tin oxide deposited by atomic layer deposition. We compare solution-processed 6,6-Phenyl C61 butyric acid methyl ester (PCBM) to thermally evaporated C 60 , each in combination with a bathocuproine (BCP) layer deposited by spin coating or thermal evaporation including a thickness variation. In general, we find that C 60 is more resilient against sputter damage and thus C 60 -based cells show higher as-grown power conversion efficiencies (PCEs). Post-deposition annealing of the complete cell stack increases the PCE further to values > 16 % on 0.5 cm 2 active area. However, we observe that the remaining solvent in the spin-coated PCBM layer is highly beneficial for the curing of the sputter damage during post-deposition annealing and we achieve even higher PCEs for cells incorporating solution-processed PCBM with up to > 18 % on 0.5 cm 2 . We show an alternative way to reach high efficiency semi-transparent perovskite solar cells without using thermally evaporated C 60 and/or a buffer layer like tin oxide deposited by atomic layer deposition (ALD).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Semitransparent perovskite solar cells for photovoltaic application10.1002/solr.202200708 ↗
2. Accounting for fabrication variability in transparent perovskite solar cells for four-terminal tandem applications10.1002/solr.202300339 ↗
3. Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems10.1126/science.aaz5074 ↗
4. Bulk incorporation with 4-methylphenethylammonium chloride for efficient and stable methylammonium-free perovskite and perovskite-silicon tandem solar cells10.1002/aenm.202203607 ↗
5. Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications10.1038/ncomms9932 ↗
6. Room-temperature sputtered aluminum-doped zinc oxide for semitransparent perovskite solar cells10.1021/acsaem.0c01081 ↗
7. Charge-transfer induced multifunctional BCP:Ag complexes for semi-transparent perovskite solar cells with a record fill factor of 80.1%10.1039/D1TA01180D ↗
8. 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability10.1038/nenergy.2017.9 ↗
9. Sputtered indium-zinc oxide for buffer layer free semitransparent perovskite photovoltaic devices in perovskite/silicon 4T-tandem solar cells
10. Thermal and environmental stability of semi-transparent perovskite solar cells for tandems enabled by a solution-processed nanoparticle buffer layer and sputtered ITO electrode10.1002/adma.201505279 ↗
11. Designed multi-layer buffer for high-performance semitransparent wide-bandgap perovskite solar cells10.1039/D2MA01089E ↗
12. Electron transport mechanism of bathocuproine exciton blocking layer in organic photovoltaics10.1039/C5CP07099F ↗
13. Energy band bending induced charge accumulation at fullerene/bathocuproine heterojunction interface10.1063/1.4728996 ↗
14. Effect of BCP buffer layer on eliminating charge accumulation for high performance of inverted perovskite solar cells
15. Interface engineering for high-performance, triple-halide perovskite–silicon tandem solar cells10.1126/science.adf5872 ↗
16. Perovskite/CIGS tandem solar cells: from certified 24.2% toward 30% and beyond10.1021/acsenergylett.2c00274 ↗
17. Preparation of monodisperse silica particles: control of size and mass fraction10.1016/0022-3093(88)90187-1 ↗