journal article·2024-06

Optimizing the window layer for achieving over 10% efficient Cu2ZnSn(S,Se)4 solar cells

Yu He, Chenxi Zhao, Zecheng Lu, Ning Guo, Hongmei Luan, Yanchun Yang, Ruijian Liu, Chengjun Zhu

Publisher page

Abstract

Indium tin oxide (ITO) and intrinsic ZnO (i-ZnO) are usually used as the window layer of Cu 2ZnSn(S,Se) 4 (CZTSSe) solar cells within a typical structure. The optoelectronic properties of the window layer play a crucial role in determining the efficiency of solar cells. In this work, two types of CZTSSe solar cells with and without i-ZnO layers were fabricated using dimethyl sulfoxide (DMSO) and dimethylformamide (DMF) as solvents, respectively. The impact of the window layer on the performance of CZTSSe solar cells was investigated. The results suggest that the device without i-ZnO still exhibits a high power conversion efficiency (PCE) compared to conventional bilayer i-ZnO/ITO structures. By removing i-ZnO and optimizing the thickness of ITO, the highest power conversion efficiency (PCE) of DMSO and DMF-based CZTSSe solar cells has been up to 10.17% and 10.27%, respectively, with an increase in open-circuit voltage (V OC ) of 15 mV (in DMSO system) and 10 mV (in DMF system), as well as an enhancement in fill factor (FF) by ∼5 percentage points. These performance improvements are mainly attributed to the reduction of series resistance (R s) of the window layer due to the removal of i-ZnO layer. Further analysis shows that the generation and collection of photon-generated carriers in CZTSSe solar cells can be affected by the optimized window layer due to optical interference effects and its resistance. Our research may provide insights for the preparation of high efficient CZTSSe solar cells with new structures of the i-ZnO free window layer.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
2. Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells10.1038/s41560-022-01132-4 ↗
3. A feasible and effective solution-processed PCBM electron extraction layer enabling the high VOC and efficient Cu2ZnSn(S,Se)4 devices10.1016/j.jechem.2022.02.009 ↗
4. Lanthanum-induced synergetic carrier doping of heterojunction to achieve high-efficiency kesterite solar cells10.1039/D3TA00597F ↗
5. Control of the phase evolution of kesterite by tuning of the selenium partial pressure for solar cells with 13.8% certified efficiency
6. Solar cell efficiency tables (version 62)10.1002/pip.3726 ↗
7. Ag,Ge dual-gradient substitution for low-energy loss and high-efficiency kesterite solar cells10.1039/D0TA06318E ↗
8. Coordination engineering of Cu-Zn-Sn-S aqueous precursor for efficient kesterite solar cells10.1016/j.scib.2020.01.005 ↗
9. Defect control for 12.5% efficiency Cu2ZnSnSe4 kesterite thin-film solar cells by engineering of local chemical environment10.1002/adma.202005268 ↗
10. Device postannealing enabling over 12% efficient solution-processed Cu2ZnSnS4 solar cells with Cd2+ substitution10.1002/adma.202000121 ↗
11. Sn4+ precursor enables 12.4% efficient kesterite solar cell from DMSO solution with open circuit voltage deficit below 0.30 V10.1007/s40843-020-1408-x ↗
12. Crown ether-assisted colloidal ZnO window layer engineering for efficient kesterite (Ag,Cu)2ZnSn(S,Se)4 solar cells10.1021/acsenergylett.3c01329 ↗
13. Enhancing Ag-alloyed Cu2ZnSnS4 solar cell performance by interfacial modification via in and Al10.1039/D1TA07928J ↗
14. Efficiency improvement of flexible Cu2ZnSn (S,Se)4 solar cells by window layer interface engineering10.1021/acsaem.1c03149 ↗
15. Positive role of inhibiting CZTSSe decomposition on intrinsic defects and interface recombination of 12.03% efficient kesterite solar cells10.1002/solr.202200256 ↗
16. Precursor solution chemistry via water additive enabling CZTSSe solar cells with over 12% efficiency10.1007/s40843-022-2246-2 ↗
17. A high-efficiency (12.5%) kesterite solar cell realized by crystallization growth kinetics control over aqueous solution based Cu2ZnSn(S,Se)410.1039/D1TA09024K ↗
18. Passivating grain boundaries via graphene additive for efficient kesterite solar cells
19. Optical and electrical modeling of CZTSSe based thin-film solar cells10.1088/1402-4896/ace667 ↗
20. Bifacial semi-transparent ultra-thin Cu(In,Ga)Se2 solar cells on ITO substrate: how ITO thickness and Na doping influence the performance10.1016/j.solmat.2021.111431 ↗
21. Ag incorporation with controlled grain growth enables 12.5% efficient kesterite solar cell with open circuit voltage reached 64.2% Shockley–Queisser limit10.1002/adfm.202101927 ↗
22. A band-gap-graded CZTSSe solar cell with 12.3% efficiency10.1039/C6TA01558A ↗
23. The enhancement of CZTSSe solar cell performance through active construction of the double-layer absorber10.1016/j.solmat.2023.112670 ↗
24. Using soda-lime glass transition temperature to enhance the efficiency of Cu2ZnSn(S,Se)4 solar cell10.1016/j.jallcom.2023.171514 ↗
25. Growth and device characteristics of CZTSSe thin-film solar cells with 8.03% efficiency10.1021/acs.chemmater.5b01181 ↗
26. Phase-separation-induced crystal growth for large-grained Cu2ZnSn(S,Se)4 thin film10.1021/acsami.8b10749 ↗
27. Enhancing grain growth for efficient solution-processed (Cu,Ag)2ZnSn(S,Se)4 solar cells based on acetate precursor10.1021/acsami.0c02629 ↗
28. Performance of CZTSSe thin film solar cells fabricated using a sulfo-selenization process: influence of the Cu composition10.1016/j.solener.2017.10.085 ↗
29. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
30. Current density mismatch in perovskite solar cells10.1021/acsenergylett.0c01642 ↗
31. Introduction to microelectronic fabrication