journal article·2022-08

An analytical investigation on characterizing the properties of glass composition for crystalline silicon solar cells based on the digital microsystem measurement technology

Shiyuan Ning, Chenqian Yang, Siyuan Li, Jintao Bai, Hui Wang, Shenghua Ma

Publisher page

Abstract

As a significant component of silver paste, glass frit has a nonnegligible effect on crystalline silicon solar cells. The purpose of this research is to obtain an analysis method to explore the performance of glass frit for solar cells. The samples were measured by digital microscopic system, and the three-dimensional layered tinting model was established. Moreover, the longitudinal cutting was carried out. The data of cross section was analyzed to obtain the information of melt height, wetting base angle, and melting included angle, to further infer the relationship between thermal stability, fluidity, wettability with mathematical model of glass frit through theoretical derivation. The curve fitting method was introduced in detail and the law was summarized. Based on relationship of them, the melting characteristics of glass frit could be quantitatively tested. The vertical view and surface topography were measured by the digital microscope and found that the glass frit underwent shrinkage, softening, wetting, spreading, and equilibrium during sintering. Combined with the image, abundant information was detected from the macroscopic structure of glass surface. Meanwhile, the mechanism of spreading was explained. Finally, the screen-printing technology combined with the 3D microscopic view of the silver grid line proved that glass frit with satisfactory performance can effectively reduce the contact resistance of solar cells, improve the photovoltaic conversion efficiency, verify the feasibility and accuracy of the simulation method equally. This study not only enriches the understanding of glass frit for crystalline silicon solar cells, but also provides a theoretical guidance for the research and determination of its performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. All-room-temperature processed 17.25%-crystalline silicon solar cell10.1021/acsaem.0c00133 ↗
2. Glass technology and its application in solar cells
3. Unlocking the potential of boronsilicate glass passivation for industrial tunnel oxide passivated contact solar cells10.1002/pip.3519 ↗
4. Reducing parasitic absorption and recombination losses in silicon solar cells through transition metal doped glass frit10.1142/S1793604719500875 ↗
5. The influence of Bi2O3 glass powder in the silver paste and the impact on silicon solar cell substrates10.1016/j.matdes.2021.109453 ↗
6. Effect of copper-contained glass on soldering property of metallized silver paste electrodes
7. Mechanism of silver/glass interaction in the metallization of crystalline silicon solar cells10.1088/2053-1591/ab6ca2 ↗
8. Mechanism investigation on effects of glass composition on Ag/Si contact for crystalline silicon solar cells10.1007/s10854-020-05211-8 ↗
9. Rare-earth element doping in glass frit for improved performance in silicon solar cells10.1142/S1793604719500802 ↗
10. Mechanism of action of tellurium glass composition on silver paste metallization in crystalline silicon solar cells
11. An investigation on determinants of silver paste metallization contact performance on crystalline silicon solar cells10.1007/s10854-020-03145-9 ↗
12. Investigation on PbO-B2O3-SiO2-R(x)O(y)Glasses applied in noncontact silver paste for crystalline silicon solar cells10.1007/s11664-020-08281-w ↗
13. Spectral conversion by silicon nanocrystal dispersed gel glass: efficiency enhancement of silicon solar cell10.1088/1361-6463/ac29e3 ↗
14. Effect of Ag-Te doped glass frits on interface reaction and the electrical properties of silicon solar cells10.20964/2018.06.78 ↗
15. Investigation on PbO–B2O3–SiO2–RxOy glasses applied in noncontact silver paste for crystalline silicon solar cells10.1007/s11664-020-08281-w ↗
16. Effect of basicity of glass frits on electrical properties of Si solar cells10.1016/j.solmat.2018.05.015 ↗
17. Wetting behavior of SnO-ZnO-P2O5-SiO2 glass on 60 vol% SiCp/Al composites and characterization of the interfacial phases10.1016/j.matlet.2021.130252 ↗
18. Characterization of physicochemical properties of As2Se3-GeTe-AgI chalcohalide glasses for solar cell and IR applications: influence of adding AgI
19. Sm3+/Yb3+ co-doped GeO2-PbO glass for efficiency enhancement of silicon solar cells10.1016/j.optmat.2020.110730 ↗
20. A downshifting Eu3+ doped glass embedded with concave pyramid microstructure to improve the efficiency of silicon solar cell10.1016/j.jre.2019.11.013 ↗
21. Evaluating the role of composition and local structure on alkali out-diffusion in glasses for thin-film solar cells10.1111/jace.17491 ↗
22. Experimental tests of a theoretically predicted noncausal correlation between dynamics and thermodynamics in glass-forming polymer melts10.1021/acs.macromol.1c01633 ↗
23. Flexibility of structure and glass-forming ability: a chemical approach10.1023/A:1011388528421 ↗
24. Reduction in contact resistivity of Ag thick-film conductor on SiNx-coated Si wafer for solar cell using lead tellurite glass frit10.35848/1347-4065/abaebb ↗
25. Effect of Te-based glass on contact formation and electrical properties in Si solar cells10.1016/j.jallcom.2020.154500 ↗
26. Effect of glass phase and temperature on contact resistance between Ag and Al electrodes
27. Performance improvement of Si solar cell via down - conversion and plasmonic processes using Eu3+ doped TeO2-GeO2-PbO glasses with silver nanoparticles as cover layer10.1016/j.jlumin.2021.118271 ↗
28. Improved Ag-Si interface performance for Si solar cells using a novel Te-based glass and recrystallization process of Ag10.1007/s12598-014-0301-8 ↗
29. Mechanism of silver/glass interaction in the metallization of crystalline silicon solar cells10.1088/2053-1591/ab6ca2 ↗
30. Crystallization behavior and thermal properties of B2O3–containing MgO-Al2O3-SiO2-Li2O glass-ceramic and its wettability on Si3N4 ceramic10.1016/j.jeurceramsoc.2018.12.002 ↗
31. Parameters affecting the wettability of glass medium in the presence of CO2; a critical review10.1016/j.molliq.2021.115943 ↗
32. Fabrication of a Zr-based bulk metallic glass surface with extreme wettability10.1016/j.jnoncrysol.2020.120001 ↗
33. Interfacial and wetting properties between glass fiber and epoxy resins with different pot lifes10.1016/j.colsurfa.2018.02.017 ↗
34. A statistical comparison of contact angle measurement methods10.1080/01694243.2019.1611400 ↗
35. Wettability and interfacial reactions between metallic glass melts and Cu/Mo used as roller materials for twin-roll casting
36. Wettability modification of glass surfaces by deposition of carbon-based nanostructured films10.1080/1536383X.2021.1871897 ↗
37. Surface wettability and electrical resistance analysis of droplets on indium-tin-oxide glass fabricated using an ultraviolet laser system10.3390/mi12010044 ↗
38. Effect of TiO2 on the crystallization, thermal expansion and wetting behavior of Nd2O3-Al2O3-SiO2 glass ceramic filler10.1016/j.jeurceramsoc.2021.09.030 ↗
39. Effects of low-temperature plasma treatment on wettability of glass surface: molecular dynamic simulation and experimental study10.1016/j.apsusc.2019.144257 ↗
40. Improving performance of bifacial-grid III-V solar cells bonded on glass by selective contact annealing10.1002/solr.202100438 ↗
41. Effect of surface wettability on the interfacial adhesion of a thermosetting elastomer on glass10.1039/D1RA05916E ↗
42. Hot embossing of moth eye-like nanostructure array on transparent glass with enhanced antireflection for solar cells10.1016/j.ceramint.2021.03.159 ↗
43. Effects of incoherent front cover glass on current-voltage characteristics of Cu(in,Ga)Se-2 solar cells: investigation into calculation accuracy for cover glass modeled as optically coherent or incoherent
44. Thermokinetic behavior of the Al2O3-PbO-B2O3 glasses10.1016/j.jnoncrysol.2021.121230 ↗
45. Three-dimensional equilibrium shapes of drops on hysteretic surfaces10.1007/s00396-012-2774-z ↗
46. Fabrication of lead-free low melting temperature TeO2-V2O5-CuO glasses and wetting behavior on AlN ceramic substrate10.1016/j.jeurceramsoc.2020.07.015 ↗
47. Effects of additives on the thermal stability of silver tellurite glass system10.1016/j.anucene.2021.108683 ↗
48. Improved glass transition temperature towards thermal stability via thiols solvent additive versus DIO in polymer solar cells10.1002/marc.201700428 ↗
49. Melting, sintering and wetting properties of ZnO-Bi2O3-B2O3 sealing glass10.1007/s11771-016-3206-x ↗
50. Wetting and surface tension of bismate glass melt10.1016/j.tca.2009.07.005 ↗
51. Effects of Bi2O3 on the structural, thermal and wetting properties of zinc bismuth phosphate glasses for low-melting sealing glass10.2109/jcersj2.122.940 ↗
52. The wettability of SiC particles by molten aluminium alloy10.1016/S0924-0136(01)00975-X ↗
53. Crystallization and wetting behavior of bismuth–borate–zinc glass and its application in low temperature joining alumina ceramics10.1016/j.jmapro.2019.02.019 ↗
54. Effect of SiO2/B2O3 ratio on the thermophysical and wetting properties of borosilicate glass sealant for glass-metal joint10.1016/j.jmatprotec.2018.04.028 ↗
55. Review of non-reactive and reactive wetting of liquids on surfaces10.1016/j.cis.2007.04.009 ↗
56. Apparent contact angles for reactive wetting of smooth, rough, and heterogeneous surfaces calculated from the variational principles10.1016/j.jcis.2018.11.068 ↗
57. Wetting of silica and 304 stainless steel by SnO-P2O5-ZnO glass at 500-600 degrees C
58. Wetting behavior and mechanism of glass coatings on samarium–cobalt alloys in the heating process10.1016/j.ceramint.2020.06.073 ↗
59. Effect of contact line dynamics on the thermocapillary motion of a droplet on an inclined plate10.1021/la4014027 ↗
60. Investigation of SiO2-B2O3-ZnO-Bi2O3 glass frits on the interface reaction of silver front contacts10.1016/j.jallcom.2020.157646 ↗
61. On the onset of motion of sliding drops10.1039/c3sm51959g ↗
62. Boundary conditions for the moving contact line problem10.1063/1.2646754 ↗
63. On the physically based modeling of surface tension and moving contact lines with dynamic contact angles on the continuum scale10.1016/j.jcp.2016.01.030 ↗
64. An efficient computational model for macroscale simulations of moving contact lines10.1016/j.jcp.2013.02.005 ↗
65. On the moving contact line singularity: asymptotics of a diffuse-interface model10.1140/epje/i2013-13026-y ↗
66. Progress in modelling of chemical-reaction limited wetting10.1016/S0955-2219(03)00291-7 ↗
67. Predicting the adhesion strength of thermoplastic/glass interfaces from wetting measurements10.1016/j.colsurfa.2018.08.052 ↗
68. Partial wetting of chemically patterned surfaces: the effect of drop size10.1016/S0021-9797(03)00285-6 ↗
69. Microscopic and macroscopic structure of the precursor layer in spreading viscous drops10.1103/PhysRevLett.91.196104 ↗
70. Precursor film in dynamic wetting, electrowetting, and electro-elasto-capillarity10.1103/PhysRevLett.104.246101 ↗
71. Structure of wetting front in the Ag-Cu-Ti/SiC reactive system10.1023/A:1004833914798 ↗
72. Atomic dynamics and Marangoni films during liquid-metal spreading10.1038/nmat1252 ↗
73. Structure and high temperature physical properties of glass seal materials in solid oxide electrolysis cell10.1016/j.jpowsour.2012.03.087 ↗