journal article·2018-06

Thermomechanical-stress-free interconnection of solar cells using a liquid metal

Dong-Youn Shin, Hae Wook Chung, Hyung-Jun Song, Jeong In Lee, Ka-Hyun Kim, Gi-Hwan Kang

Publisher page

Abstract

Abstract Research efforts to overwhelmingly fortify the economics of photovoltaics have focused on increasing the light-to-electricity conversion efficiency and reducing the overall manufacturing costs. Since lowering the consumption of silicon has the potential to greatly curtail the material costs, studies on wafering thin silicon substrates have been performed. However, current methods to interconnect solar cells with metal ribbons are not sufficient to employ thin silicon wafers. Therefore, this study explores a novel route to interconnect solar cells with metal ribbons without thermomechanical stress using a highly conductive liquid metal. Galinstan, which is notoriously difficult to print, is successfully harnessed to be printable by suspending submillimetre-sized Galinstan droplets in the carrier vehicle, as aided by the yield stress. By mechanically sintering the Galinstan paste with gentle mechanical pressure, solar cells are interconnected with metal ribbons at room temperature. Albeit the averaged maximum power of the unit modules interconnected using the Galinstan paste was significantly degraded after just 100 thermal cycles due to the possible formation of resistive intermetallic compounds of Galinstan, the power degradation of the best unit module using the Galinstan paste is −0.9%, which is smaller than the averaged one of the unit modules using a conventional soldering method (-1.35%), implying the thermomechanical-stress-free interconnection method using a liquid metal has a chance to be improved for being a comparable competitor to the conventional soldering method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Black silicon solar cells with interdigitated back-contacts achieve 22.1% efficiency10.1038/nnano.2015.89 ↗
2. Surface passivation of high-efficiency silicon solar cells by atomic-layer-deposited Al2O310.1002/pip.823 ↗
3. Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell10.1109/JPHOTOV.2014.2352151 ↗
4. 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability10.1038/nenergy.2017.9 ↗
5. Bimodally dispersed silver paste for the metallization of a crystalline silicon solar cell using electrohydrodynamic jet printing10.1016/j.solmat.2015.01.008 ↗
6. Electrostatic-force-assisted dispensing printing to construct high-aspect-ratio of 0.79 electrodes on a textured surface with improved adhesion and contact resistivity10.1038/srep16704 ↗
7. Fine front side metallisation by stretching the dispensed silver paste filament with graphite nanofibres10.1016/j.solmat.2017.05.010 ↗
8. Ag requirements for silicon wafer-based solar cells10.1002/pip.1125 ↗
9. Record low Ag paste consumption of 67.7 mg with dual print10.1016/j.egypro.2013.11.089 ↗
10. Multi-busbar solar cells and modules: high efficiencies and low silver consumption10.1016/j.egypro.2013.07.286 ↗
11. Thin Czochralski silicon solar cells based on diamond wire sawing technology10.1016/j.solmat.2011.11.028 ↗
12. Crystalline thin-foil silicon solar cells: where crystalline quality meets thin-film processing10.1002/pip.1238 ↗
13. SEMI PV Group, International Technology Roadmap for Photovoltaic (ITRPV.net), Results 2016, 〈http://www.itrpv.net〉, last accessed on the 17th August 2017.
14. Crystalline silicon photovoltaics: a cost analysis framework for determining technology pathways to reach baseload electricity costs10.1039/c2ee03489a ↗
15. Aging behaviour of laser welded Al-interconnections in crystalline silicon modules10.1016/j.solmat.2012.06.021 ↗
16. Ultrasonic bonding of aluminum ribbons to interconnect high-efficiency crystalline-silicon solar cells10.1016/j.egypro.2012.07.127 ↗
17. Comparison of new conductive adhesives based on silver and carbon nanotubes for solar cells interconnection10.1016/j.solmat.2012.10.020 ↗
18. A review of interconnection technologies for improved crystalline silicon solar cell photovoltaic module assembly10.1016/j.apenergy.2015.04.120 ↗
19. The name Galinstan is a registered trademark of Geratherm Medical AG, 2018. but also widely recognized as a common name for a liquid metal. 〈http://en.wikipedia.org〉, last accessed on the 5th January.
20. Characterization of Nontoxic Liquid-Metal Alloy Galinstan for Applications in Microdevices10.1109/JMEMS.2011.2174421 ↗
21. Emerging applications of liquid metals featuring surface oxides10.1021/am5043017 ↗
22. Methods to pattern liquid metals10.1039/C5TC00330J ↗
23. Mechanically sintered gallium-indium nanoparticles10.1002/adma.201404790 ↗
24. Handwritten, soft circuit boards and antennas using liquid metal nanoparticles10.1002/smll.201502692 ↗
25. Growth kinetics of Ag3Sn in silicon solar cells with a sintered Ag metallization layer10.1016/j.solmat.2014.01.018 ↗
26. Graphene as a diffusion barrier in galinstan-solid metal contacts10.1109/TED.2014.2331893 ↗
27. Review of graphene as a solid state diffusion barrier10.1002/smll.201501120 ↗