Investigating the effect of aluminum oxide fixed charge on Schottky barrier height in molybdenum oxide-based selective contacts
Source abstract
Abstract
A tunneling atomic layer deposited (ALD) AlO x layer was inserted in a Si|SiO x|AlO x|MoO x |metal tunnel diode structure to investigate the impact of fixed interface charge on Schottky barrier height. ALD AlO x provides a synthesis-tunable fixed charge and can provide excellent field effect passivation at the SiO x|AlO x interface. A large (>1 × 10 12 q .cm −2 ) negative fixed charge density was expected to decrease Schottky barrier height on p-type silicon and increase Schottky barrier height on n-type silicon by up to 0.4 eV based on an electrostatic model. Fixed charge density and interface trap state density were measured using a thick layer of AlO x in metal oxide semiconductor capacitor structures (MOSCAPs); Schottky barrier height and specific contact resistivity were measured using a tunneling-active layer of AlO x in contacted structures with MoO x. In some samples, HfO x interface layers were inserted between AlO x and silicon to quench the fixed negative charge. The Schottky barrier height was found to vary with processing conditions but did not have a strong correlation with expected fixed charge density. Thus, while fixed charge may play a role in determining the Schottky barrier height, other parameters also have significant affect. Further work is needed to minimize contact resistivity and elucidate other factors impacting the Schottky barrier height.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Semiconductor materials and interfaces · Advancements in Semiconductor Devices and Circuit Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (95)
Show source-provided references
1. PV cells and modules – state of the art, limits and trends
2. Exploring the practical efficiency limit of silicon solar cells using thin solar-grade substrates10.1039/D0TA04575F ↗
3. Oxide coatings for semiconductor light absorbers: advanced synthesis and applications
4. Molybdenum oxide MoOx: a versatile hole contact for silicon solar cells10.1063/1.4903467 ↗
5. Performance evaluation of passivated silicon carrier-selective contact solar cell10.1109/TED.2017.2771816 ↗
6. Heterojunction solar cells with asymmetrically carrier-selective contact structure of molybdenum-oxide/silicon/magnesium-oxide10.1016/j.solener.2017.11.047 ↗
7. Effect of rear contact coverage and improvement of efficiency of crystalline p-Si solar cell compared to state of art PERC cell10.1109/ACCESS.2023.3264900 ↗
8. Tuning the electrical properties of titanium oxide bilayers prepared by atomic layer deposition at different temperatures
9. Hole selective WOx and V2Ox contacts using solution process for silicon solar cells application10.1016/j.matchemphys.2021.125101 ↗
10. Investigation of atomic-layer-deposited TiOx as selective electron and hole contacts to crystalline silicon10.1016/j.egypro.2017.09.093 ↗
11. Role of electron carrier selective contact layer of lithium fluoride films with wide bandgap and low work function for silicon heterojunction solar cells10.1016/j.mssp.2021.105982 ↗
12. Dopant-free and carrier-selective heterocontacts for silicon solar cells: recent advances and perspectives10.1002/advs.201700547 ↗
13. Magnesium-doped zinc oxide as electron selective contact layers for efficient perovskite solar cells10.1002/cssc.201600860 ↗
14. Magnesium fluoride electron-selective contacts for crystalline silicon solar cells10.1021/acsami.6b03599 ↗
15. Schroder · 2006
16. Kasap · 2002
17. Reducing nonradiative losses in perovskite LEDs through atomic layer deposition of Al2O3 on the hole-injection contact10.1021/acsnano.2c04786 ↗
18. 23.5%-efficient silicon heterojunction silicon solar cell using molybdenum oxide as hole-selective contact
19. Transition metal oxide work functions: the influence of cation oxidation state and oxygen vacancies10.1002/adfm.201200615 ↗
20. Origin of passivation in hole-selective transition metal oxides for crystalline silicon heterojunction solar cells10.1557/jmr.2016.453 ↗
21. Interdigitated back-contacted crystalline silicon solar cells fully manufactured with atomic layer deposited selective contacts
22. Low-temperature atomic layer deposition of MoOx for silicon heterojunction solar cells10.1002/pssr.201510117 ↗
23. Influence of post deposition fabrication steps and quantitative estimation of band diagram of Si/MoOX heterojunction for carrier selective solar cells10.1016/j.solener.2019.10.025 ↗
24. Molybdenum oxide: a superior hole extraction layer for replacing p-type hydrogenated amorphous silicon with high efficiency heterojunction Si solar cells10.1016/j.materresbull.2018.10.018 ↗
25. Sputter deposited sub-stochiometric MoOx thin film as hole-selective contact layer for silicon based heterojunction devices10.1016/j.tsf.2019.05.004 ↗
26. Transport mechanisms in silicon heterojunction solar cells with molybdenum oxide as a hole transport layer10.1016/j.solmat.2018.05.019 ↗
27. Improving the passivation of molybdenum oxide hole-selective contacts with 1 nm hydrogenated aluminum oxide films for silicon solar cells
28. Molybdenum and tungsten oxide: high work function wide band gap contact materials for hole selective contacts of silicon solar cells10.1016/j.solmat.2015.05.031 ↗
29. Al2O3/MoOx hole-selective passivating contact for silicon heterojunction solar cell10.1149/2162-8777/ac4d83 ↗
30. Improved passivation performance of Al2O3 interlayer/MoOX thin films continuously grown via atomic layer deposition
31. Requirements for efficient hole extraction in transition metal oxide-based silicon heterojunction solar cells10.1063/1.5045250 ↗
32. MoOx work function, interface structure, and thermal stability analysis of ITO/MoOx/a-Si(i) stacks for hole-selective silicon heterojunction solar cells10.1016/j.apsusc.2021.149552 ↗
33. Transition metal oxide work functions: the influence of cation oxidation state and oxygen vacancies10.1002/adfm.201200615 ↗
34. Transmission electron microscopy and electron energy-loss spectroscopy studies of hole-selective molybdenum oxide contacts in silicon solar cells10.1021/acsami.9b12703 ↗
35. Sputter-deposited WOx and MoOx for hole selective contacts10.1016/j.egypro.2017.09.259 ↗
36. Heterojunction solar cell with carrier selective contact using MoOx deposited by atomic layer deposition10.3740/MRSK.2019.29.5.322 ↗
37. Facile solution-processed molybdenum oxide as hole transporting material for efficient organic solar cell10.1016/j.jechem.2021.12.037 ↗
38. Atomic-layer deposited passivation schemes for c-Si solar cells
39. Atomic layer deposition : an overview10.1021/cr900056b ↗
40. Consistency and reproducibility in atomic layer deposition10.1116/1.5140603 ↗
41. On the c-Si surface passivation mechanism by the negative-charge-dielectric Al2O310.1063/1.3021091 ↗
42. Stable chemical enhancement of passivating nanolayer structures grown by atomic layer deposition on silicon10.1039/D3NR01374J ↗
43. Effect on passivation mechanism and properties of HfO2/crystalline-Si interface under different annealing atmosphere
44. Silicon surface passivation of industrial n-type CZ Si (111) by Al2O3 layers deposited by thermal ALD process for application in carrier selective contact solar cells10.1007/s10854-023-10587-4 ↗
45. Ultrathin atomic layer deposited niobium oxide as a passivation layer in silicon based photovoltaics10.1063/5.0067281 ↗
46. Schroder · 2006
47. Aluminum oxide passivating tunneling interlayers for molybdenum oxide hole-selective contacts10.1109/JPHOTOV.2020.2973447 ↗
48. Improved passivation performance of Al2O3 interlayer/MoOX thin films continuously grown via atomic layer deposition
49. 16%-efficiency p-type TOPCon solar cell with ALD-Al2O3/MoOx/Ag as a hole-selective passivating contact10.1016/j.solener.2022.10.019 ↗
50. Si surface passivation by Al2O3 thin films deposited using a low thermal budget atomic layer deposition process10.1063/1.4800541 ↗
51. Activation energy of negative fixed charges in thermal ALD Al2O310.1063/1.4960097 ↗
52. Controlling the fixed charge and passivation properties of Si(100)/Al2O3 interfaces using ultrathin SiO2 interlayers synthesized by atomic layer deposition10.1063/1.3658246 ↗
53. Spatially-modulated silicon interface energetics via hydrogen plasma-assisted atomic layer deposition of ultrathin alumina10.1002/admi.202202166 ↗
54. Effect of the SiO2 interlayer properties with solid-source hydrogenation on passivated contact performance and surface passivation10.1016/j.egypro.2017.09.302 ↗
55. The physics and chemistry of the Schottky barrier height10.1063/1.4858400 ↗
56. Absence of evidence for fixed charge in metal–aluminum oxide–silicon tunnel diodes10.1002/pssb.201800342 ↗
57. Evolution of silicon wafer cleaning technology
58. Ultrathin silicon dioxide layers with a low leakage current density formed by chemical oxidation of Si10.1063/1.1517723 ↗
59. Nitric acid oxidation of Si to form ultrathin silicon dioxide layers with a low leakage current density10.1063/1.1621720 ↗
60. Postoxidation annealing treatments to improve Si/ultrathin SiO2 characteristics formed by nitric acid oxidation10.1149/1.1809594 ↗
61. Asuha, Nitric acid oxidation of Si (NAOS) method for low temperature fabrication of SiO2/Si and SiO2/SiC structures10.1016/j.apsusc.2010.03.092 ↗
62. Improved interface and electrical properties by inserting an ultrathin SiO2 buffer layer in the Al2O3/Si heterojunction
63. Diversified applications of UV-ozone oxide: effective surface clean and high-quality passivation
64. Gao · 2021 · 2020
65. Goetzberger · 1967 · XLVI · 1055
66. Comparison of hydrolytic and non-hydrolytic atomic layer deposition chemistries: interfacial electronic properties at alumina-silicon interfaces10.1063/1.4935479 ↗
67. Studies of tunnel MOS diodes I. Interface effects in silicon Schottky diodes10.1088/0022-3727/4/10/319 ↗
68. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
69. Exploiting fixed charge to control Schottky barrier height in Si|Al2O3|MoOx- based tunnel diodes
70. Electric field induced surface passivation of Si by atomic layer deposited Al2O3 studied by optical second-harmonic generation
71. Influence of deposition temperature of thermal ALD deposited Al2O3 films on silicon surface passivation10.1063/1.4922267 ↗
72. On the control of the fixed charge densities in Al2O3-based silicon surface passivation schemes10.1021/acsami.5b06606 ↗
73. Role of field-effect on c-Si surface passivation by ultrathin (2-20 nm) atomic layer deposited Al2O310.1063/1.3334729 ↗
74. The negative fixed charge of atomic layer deposited aluminium oxide - a two-dimensional SiO2/AlOx interface effect10.1088/1361-6463/abf675 ↗
75. Modulation doping of silicon using aluminium-induced acceptor states in silicon dioxide10.1038/srep46703 ↗
76. Dicks · 2018
77. In situ measurement of fixed charge evolution at silicon surfaces during atomic layer deposition10.1063/1.4907974 ↗
78. Negative charge and charging dynamics in Al2O3 films on Si characterized by second-harmonic generation10.1063/1.2985906 ↗
79. Influence of the SiO2 interlayer thickness on the density and polarity of charges in Si/SiO2/Al2O3 stacks as studied by optical second-harmonic generation10.1063/1.4857075 ↗
80. An investigation of field-effect passivation layer characteristics using second harmonic generation measurement10.1109/TSM.2019.2949003 ↗
81. Structural properties of Al-O monolayers in SiO2 on silicon and the maximization of their negative fixed charge density10.1021/acsami.8b06098 ↗
82. Material combination of Tunnel-SiO2 with a (sub-)Monolayer of ALD-AlOx on silicon offering a highly passivating hole selective contact
83. High surface passivation quality and thermal stability of ALD Al2O3 on wet chemical grown ultra-thin SiO2 on silicon10.1016/j.egypro.2011.06.197 ↗
84. Electrical and Chemical studies on Al2O3 passivation activation process10.1016/j.egypro.2014.12.347 ↗
85. Comparison of methods to quantify interface trap densities at dielectric/III-V semiconductor interfaces10.1063/1.3520431 ↗
86. Effects of low temperature anneal on the interface properties of thermal silicon oxide for silicon surface passivation10.1166/jnn.2016.12178 ↗
87. Passivation properties of atomic-layer-deposited hafnium and aluminum oxides on Si surfaces10.1109/TED.2011.2176943 ↗
88. Extraction of Schottky diode parameters from forward current-voltage characteristics10.1063/1.97359 ↗
89. Inaccuracies in contact resistivity from the Cox–Strack method: a review
90. Effect of silicon oxide thickness on polysilicon based passivated contacts for high-efficiency crystalline silicon solar cells10.1016/j.solmat.2018.05.011 ↗
91. B.M. Garland, N.C. Strandwitz, Probing Evolution of SiOx and ALD AlOy with Processing by Photoelectron Spectroscopy, (Unpublished). (n.d.).
92. SiNx and AlOx nanolayers in hole selective passivating contacts for high efficiency silicon solar cells
93. Symmetrical Al2O3-based passivation layers for p- and n-type silicon10.1016/j.solmat.2014.06.005 ↗
94. Jordan · 2016
95. Corona charging and optical second-harmonic generation studies of the field-effect passivation of c-Si by Al2O3 films