Effect of thermal radiation entropy on the outdoor efficiency limit of single-junction silicon solar cells
Source abstract
Abstract
Incoming radiation energy illuminating a solar cell contains a certain amount of entropy, which does not contribute to output electrical work. Entropy has a different spectral distribution from the internal energy of light and consequently affects PV cell performance. Here in this work, we investigate the influence of entropy content of thermally radiated light on the maximum achievable efficiency of single-junction solar cells. We revise the value of the well-known Shockley-Queisser (SQ) limit for various absorber materials and take a deeper look at this effect by re-calculating the efficiency limit of crystalline silicon solar cells considering Meitner-Auger recombination. When considering the entropy content of AM 1.5 standard spectrum, the SQ limit for silicon drops from 33.15% to 30.42%. Further, considering Meitner-Auger recombination and using measured properties of silicon, the efficiency limit lowers to 27.12% from the already established 29.43%. This suggests a 4% thinner silicon absorber, reaching a thickness of ∼101 μm; hinting PV industry that a thinner Si wafer can provide the optimum outdoor energy yield. We further show that the entropy content of terrestrial radiation is less in favor of c-Si technology and most in favor of amorphous silicon. In the end, we discuss a few applications of considering entropy of incoming sunlight for photovoltaics, which range from PV device design to PV module tilt optimization and even PV system electrical standards.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. On the theory of the energy distribution law of the normal spectrum
2. Wurfel · 2005
3. Smets · 2015
4. Green · 2006
5. A brief commented history of exergy from the beginnings to 2004
6. Baehr · 1966 · vol. 12
7. Wang · 2020
8. Exergy of heat radiation10.1115/1.3687092 ↗
9. Theoretical maximum for energy from direct and diffuse sunlight10.1038/264734a0 ↗
10. Thermodynamic constraints, effective temperatures and solar cells
11. On the exergy of radiation10.1016/j.solener.2003.07.012 ↗
12. Analysis of terrestrial solar radiation exergy10.1016/j.solener.2009.03.011 ↗
13. What is the useful energy of a photon?10.1063/1.4766177 ↗
14. Intrinsic photon entropy? The darkside of light10.1016/j.ijengsci.2003.09.005 ↗
15. Entropy of radiation: the unseen side of light10.1038/s41598-017-01622-6 ↗
16. Baruch · On some thermodynamic aspects of photovoltaic solar energy conversion. · 1995 · 36 · 201
17. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
18. 2020
19. Tiedje · Limiting efficiency of silicon solar cells. · 1984 · 31 · 711
20. Über die entstehung der β-strahl-spektren radioaktiver substanzen10.1007/BF01326962 ↗
21. Sur les rayons β secondaires produits dans un gaz par des rayons X
22. False attribution10.1088/0031-9112/39/8/017 ↗
23. Matsakis · A renaming proposal:‘‘The Auger-Meitner effect'. · 2019 · 72 · 10
24. Kerr · Limiting efficiency of crystalline silicon solar cells due to Coulomb-enhanced Auger recombination. · 2003 · 11 · 97
25. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
26. The chemical potential of radiation10.1088/0022-3719/15/18/012 ↗
27. G173-03-Standard Tables for reference solar spectral irradiances: direct Normal and Hemispherical on 37 tilted surface
28. SMARTS code
29. Tabulated values of the Shockley–Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
30. Detailed balance and reciprocity in solar cells10.1002/pssa.200880458 ↗
31. On the relation between the radiating and absorbing powers of different bodies for light and heat10.1080/14786446008642901 ↗
32. Photonic design principles for ultrahigh-efficiency photovoltaics10.1038/nmat3263 ↗
33. Limits on the open-circuit voltage and efficiency of silicon solar cells imposed by intrinsic Auger processes10.1109/T-ED.1984.21588 ↗
34. Limiting efficiency of bulk and thin-film silicon solar cells in the presence of surface recombination10.1002/(SICI)1099-159X(199907/08)7:4<327::AID-PIP250>3.0.CO;2-B ↗
35. A freeware 1D emitter model for silicon solar cells
36. Electrical properties of pure silicon and silicon alloys containing boron and phosphorus10.1103/PhysRev.75.865 ↗
37. A simulation model for the density of states and for incomplete ionization in crystalline silicon. I
38. A simulation model for the density of states and for incomplete ionization in crystalline silicon. II
39. Finite-temperature full random-phase approximation model of band gap narrowing for silicon device simulation10.1063/1.368545 ↗
40. Numerical modeling of highly doped Si: P emitters based on Fermi–Dirac statistics and self-consistent material parameters10.1063/1.1501743 ↗
41. Schenk · 1998
42. The electric conductivity of simple semiconductors10.1088/0370-1298/63/1/109 ↗
43. Precise and fast computation of inverse Fermi–Dirac integral of order 1/2 by minimax rational function approximation
44. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
45. Temperature dependence of the radiative recombination coefficient of intrinsic crystalline silicon10.1063/1.1610231 ↗
46. Injection dependence of spontaneous radiative recombination in c-Si: experiment, theoretical analysis, and simulation
47. Self-consistent optical parameters of intrinsic silicon at 300 K including temperature coefficients10.1016/j.solmat.2008.06.009 ↗
48. Parameterization of free carrier absorption in highly doped silicon for solar cells10.1109/TED.2013.2262526 ↗
49. Green · 1995
50. Electron and hole mobilities in silicon as a function of concentration and temperature10.1109/T-ED.1982.20698 ↗
51. Solar cell efficiency tables (version 56)10.1002/pip.3303 ↗
52. Solar cell efficiency tables (version 41)10.1002/pip.2352 ↗
53. Solar cell efficiency tables (version 45)10.1002/pip.2573 ↗
54. Solar cell efficiency tables (version 50)10.1002/pip.2909 ↗
55. Solar cell efficiency tables (version 53)10.1002/pip.3102 ↗
56. Solar cell efficiency tables (version 54)10.1002/pip.3171 ↗
57. Solar cell efficiency tables (Version 55)10.1002/pip.3228 ↗
58. Photovoltaic solar cell technologies: analysing the state of the art10.1038/s41578-019-0097-0 ↗
59. Wang · 2014 · 1
60. Fabrication and thermal optimization of LED solar cell simulator10.1016/j.cap.2010.02.035 ↗
61. Rösemann · 2011
62. Monitoring and performance analysis of grid connected photovoltaic under different climatic conditions in south Algeria10.1016/j.enconman.2016.10.058 ↗
63. Comparing optical performance of a wide range of perovskite/silicon tandem architectures under real-world conditions10.1515/nanoph-2020-0643 ↗
64. Modelling of diffuse solar fraction with multiple predictors10.1016/j.renene.2009.07.018 ↗
65. Modeling daylight availability and irradiance components from direct and global irradiance10.1016/0038-092X(90)90055-H ↗
66. Effects of spectral albedo on solar photovoltaic devices10.1016/j.solmat.2014.01.046 ↗
67. 2011
68. Electrical Installations of Buildings—Part 7-712: Requirements for Special Installations or Locations—Solar Photovoltaic Power Supply Systems, IEC 60364-7-712 · 2002
69. 1998 · 1374