Synthesis and characterization of a pentaselenophene-based donor–acceptor copolymer for use in organic photovoltaic cells
Source abstract
Abstract
Abstract A new conjugated polymer containing pentaselenophene (5Se) electron donor moieties was designed for use in polymer solar cells and synthesized via a Stille coupling reaction. The structure, optical properties, electrochemical properties, hole mobility, photovoltaic properties, and AFM morphology of the homopolymer (P5Se) and the donor–acceptor copolymer (P5SeDTDPP) with a diketopyrrolopyrrole (DPP) acceptor were investigated and are discussed. The polymers showed good solubility, film-forming properties, and thermal stabilities. P5Se exhibited a broad absorption across the visible range, 400–700 nm, which is a prerequisite for photovoltaic applications. P5SeDTDPP yielded a broader absorption spectrum, enhanced π–π interactions, and a lower band gap compared to P5Se, due to the enhanced intramolecular charge transfer interactions between the donating moiety (pentaselenophene) and the DPP accepting moiety. Solution-processed field effect transistors fabricated from these polymers displayed p-type organic thin film transistor characteristics. P5Se and P5SeDTDPP exhibited typical p-type organic semiconductor characteristics with hole mobilities of 2.3×10−3 and 1.2×10–2 cm2 V−1 s−1, respectively. Photovoltaic devices were fabricated using polymer:PCBM blends in ITO/PEDOT:PSS/blend/Al structures. The P5SeDTDPP device exhibited an open circuit voltage (VOC) of 0.44 V, a short circuit current (JSC) of 10.67 mA/cm2, a fill factor (FF) of 0.51, and a power conversion efficiency (PCE) of 2.40% under AM 1.5 G (100 mW/cm2) conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
2. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
3. Efficient polymer:polymer bulk heterojunction solar cells10.1063/1.2176863 ↗
4. Efficient methano[70]fullerene/MDMO-PPV bulk heterojunction photovoltaic cells10.1002/anie.200351647 ↗
5. Synthesis and characterization of a thiazolo[5,4-d]thiazole-based copolymer for high performance polymer solar cells10.1039/C0CC03036H ↗
6. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
7. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
8. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
9. Silicon atom substitution enhances interchain packing in a thiophene-based polymer system10.1002/adma.200902469 ↗
10. Synthesis and photovoltaic properties of a thienylenevinylene and diketopyrrolopyrrole copolymer with high mobility10.1002/marc.201100327 ↗
11. Synthesis and characterization of new low-bandgap diketopyrrolopyrrole-based copolymers10.1021/ma901114j ↗
12. An easily synthesized blue polymer for high-performance polymer solar cells10.1002/adma.201002225 ↗
13. High-mobility ambipolar near-infrared light-emitting polymer field-effect transistors10.1002/adma.200702775 ↗
14. Poly(diketopyrrolopyrrole-terthiophene) for ambipolar logic and photovoltaics10.1021/ja907506r ↗
15. A high mobility p-type dpp-thieno[3,2-b]thiophene copolymer for organic thin-film transistors10.1002/adma.201002313 ↗
16. Annealing-free high-mobility diketopyrrolopyrrole-quaterthiophene copolymer for solution-processed organic thin film transistors10.1021/ja1085996 ↗
17. Efficient solar cells based on an easily accessible diketopyrrolopyrrole polymer10.1002/adma.201001449 ↗
18. Synthesis and characterization of new selenophene-based donor–acceptor low-bandgap polymers for organic photovoltaic cells10.1021/ma2020112 ↗
19. Synthesis and photovoltaic properties of low band gap quarterthiophene-alt-diketopyrrolopyrroles polymer having high mobility10.1016/j.solmat.2012.04.043 ↗
20. 3,6-Di(furan-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione and bithiophene copolymer with rather disordered chain orientation showing high mobility in organic thin film transistors10.1039/c1jm11290b ↗
21. Synthesis and characterization of new selenophene-based conjugated polymers for organic photovoltaic cells10.1002/pola.25064 ↗
22. Studies of highly regioregular poly(3-hexylselenophene) for photovoltaic applications10.1002/adma.200701265 ↗
23. Regioregular poly(3-hexyl)selenophene: a low band gap organic hole transporting polymer10.1039/b712398a ↗
24. High mobility ambipolar charge transport in polyselenophene conjugated polymers10.1002/adma.200903711 ↗
25. Highly stable printed polymer field-effect transistors and inverters via polyselenophene conjugated polymers10.1039/c2jm16546e ↗
26. Optimum charge carrier mobility in organic solar cells10.1063/1.2711534 ↗
27. Bandgap and molecular level control of the low-bandgap polymers based on 3,6-dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione toward highly efficient polymer solar cells10.1021/ma9012972 ↗
28. Carbazole-based ladder-type heptacylic arene with aliphatic side chains leading to enhanced efficiency of organic photovoltaics10.1021/cm200041v ↗
29. Characterizing materials with cyclic voltammetry10.1002/adma.19940061204 ↗
30. Organic thin film transistors for large area electronics10.1002/1521-4095(20020116)14:2<99::AID-ADMA99>3.0.CO;2-9 ↗
31. Charge photogeneration in organic solar cells10.1021/cr900271s ↗
32. Exciton diffusion and dissociation in a poly(p-phenylenevinylene)/C60 heterojunction photovoltaic cell10.1063/1.115797 ↗