Effects of ITO based back contacts on Cu(In,Ga)Se2 thin films, solar cells, and mini-modules relevant for semi-transparent building integrated photovoltaics
Source abstract
Abstract
This study presents the results of the development of semi-transparent Cu(In,Ga)Se2 (CIGSe) mini-modules for the application in building integrated photovoltaics (BIPV). Applying in-situ X-ray diffraction in real-time during CIGSe growth we find that the bulk of indium-tin-oxide (ITO), acting as the transparent back contact, is chemically stable in CIGSe processing. CIGSe layers grown on reactively sputtered ITO (Ar/O2 flux ratio = 60:1) or on ITO annealed in ambient air have a proportionally higher (220/204) orientation compared to CIGSe layers grown on as fabricated ITO sputtered solely by Ar. However, independent from the fabrication and annealing state of the ITO back contact, after CIGSe deposition at high substrate temperatures ≥600 °C accumulation of Ga at the CIGSe/ITO back contact interface combined with reduced solar cell efficiency is observed. This Ga accumulation visible in elemental depth profiles is attributed to the formation of gallium-oxide (GaOx). Applying a very thin (≈10–30 nm) functional molybdenum layer in between CIGSe and the ITO back contact inhibits the formation of GaOx. Based on this Mo/ITO back contact configuration semi-transparent 10 × 10 cm2 mini-modules with 14 cells interconnected in series have been fabricated. Module parameters resulted in a fill factor of 63% and >12% in efficiency. The solar active coverage of the modules amounts to ≈70%, and the average visible transmittance (in the range 380–780 nm) of the transparent sections was 27.6% (9.6% for the total area of the device). Optimisation of the Mo/ITO contact allows increasing this transparency to values > 50%. Long-term outdoor testing of a semi-transparent module prototype reveals no degradation in electric output power for 3 months, demonstrating the device stability under changing climatic conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. The inherent stability of Cu (In, Ga) Se2-based solar cells
2. Scheer · 2011
3. Stability of Cu (In, Ga) Se2 solar cells: a literature review10.1016/j.solener.2016.04.010 ↗
4. Advances in cost-efficient thin-film photovoltaics based on Cu (In, Ga) Se2
5. Comparison assessment of BIPV façade semi-transparent modules: further insights on human comfort conditions10.1016/j.egypro.2014.02.160 ↗
6. Ultrathin Cu (In, Ga) Se2 transparent photovoltaics: an alternative to conventional solar energy-harvesting windows10.1016/j.nanoen.2021.106711 ↗
7. Alternative device structures for CIGS-based solar cells with semi-transparent absorbers10.1016/j.nanoen.2016.10.038 ↗
8. Self-aligned growth of thin film Cu (In, Ga) Se2 solar cells on various micropatterns10.1063/1.4971975 ↗
9. Transparent back‐junction control in Cu (In, Ga) Se2 absorber for high‐efficiency, color‐neutral, and semitransparent solar module10.1002/pip.3520 ↗
10. Influence of the Cu (In, Ga) Se2 thickness and Ga grading on solar cell performance10.1002/pip.462 ↗
11. The influence of sodium on the molybdenum/Cu (In, Ga) Se2 interface recombination velocity, determined by time resolved photoluminescence10.1063/1.4928187 ↗
12. Potential of submicrometer thickness Cu (In, Ga) Se 2 solar cells10.1063/1.2128054 ↗
13. Ultrathin Cu (In, Ga) Se 2 solar cells
14. Fonoll-Rubio · 2022
15. Novel device structure for Cu (In, Ga) Se2 thin film solar cells using transparent conducting oxide back and front contacts10.1016/j.solener.2004.08.010 ↗
16. Comparison of Mo and ITO back contacts in CIGSe solar cells: vanishing of the main capacitance step10.1002/pip.3476 ↗
17. Ultrathin CIGSe solar cells with integrated structured back reflector10.1002/solr.202000295 ↗
18. Development of reflective back contacts for high-efficiency ultrathin Cu (In, Ga) Se2 solar cells10.1016/j.tsf.2018.12.041 ↗
19. Keller · 2022
20. Bifacial semi-transparent ultra-thin Cu (In, Ga) Se2 solar cells on ITO substrate: how ITO thickness and Na doping influence the performance10.1016/j.solmat.2021.111431 ↗
21. Surface modification of indium tin oxide by plasma treatment: an effective method to improve the efficiency, brightness, and reliability of organic light emitting devices10.1063/1.118575 ↗
22. Efficient light-emitting diodes based on polymers with high electron affinities10.1038/365628a0 ↗
23. Cu (In1-x, Gax) Se2-based thin film solar cells using transparent conducting back contacts10.1143/JJAP.41.L1209 ↗
24. Surface passivation of CIGS solar cells using gallium oxide
25. Amorphous oxides as electron transport layers in Cu (In, Ga) Se2 superstrate devices
26. The application of sputtered gallium oxide as buffer for Cu (In, Ga) Se2 solar cells10.1002/pssr.202100180 ↗
27. Microstructural and diffusion properties of CIGS thin film solar cells fabricated using transparent conducting oxide back contacts10.1016/j.tsf.2004.11.142 ↗
28. Sodium control in Ultrathin Cu (In, Ga) Se2 solar cells on transparent back contact for efficiencies beyond 1210.1016/j.solmat.2021.110969 ↗
29. Control of structural and electrical properties of indium tin oxide (ITO)/Cu (In, Ga) Se2 interface for transparent back-contact applications10.1021/acs.jpcc.8b11149 ↗
30. The role of NaF post-deposition treatment on the photovoltaic characteristics of semitransparent ultrathin Cu (In, Ga) Se 2 solar cells prepared on indium-tin-oxide back contacts: a comparative study10.1039/C9TA06274B ↗
31. Formation of transparent and ohmic ZnO: Al/MoSe2 contacts for bifacial Cu (In, Ga) Se2 solar cells and tandem structures10.1016/j.tsf.2004.11.001 ↗
32. Development of semitransparent CIGS thin-film solar cells modified with a sulfurized-AgGa layer for building applications10.1039/C6TA01909A ↗
33. High‐efficiency CuIn x Ga1− x Se2 solar cells made from (In x, Ga1− x)2Se3 precursor films10.1063/1.112670 ↗
34. Real time observation of phase formations by XRD during Ga‐rich or In‐rich Cu (In, Ga) Se2 growth by co‐evaporation10.1002/pssa.201431949 ↗
35. In situ XRD investigation of Cu2ZnSnSe4 thin film growth by thermal co‐evaporation10.1002/pssa.201330340 ↗
36. Point defects and related properties of highly co-doped bixbyite in 2 O 310.1039/B300171G ↗
37. Surface characterization and microstructure of ITO thin films at different annealing temperatures10.1016/j.apsusc.2007.05.032 ↗
38. A gradual annealing of amorphous sputtered indium tin oxide: crystalline structure and electrical characteristics10.1016/j.tsf.2012.01.029 ↗
39. Structural and electrical properties of In2O3: Sn films prepared by radio-frequency sputtering10.1016/S0040-6090(01)01013-6 ↗
40. Structural studies of tin-doped indium oxide (ITO) and In4Sn3O1210.1006/jssc.1997.7613 ↗
41. Preparation of transparent conducting In4Sn3O12 thin films by DC magnetron sputtering10.1016/S0040-6090(97)00530-0 ↗
42. Defect structure studies of bulk and nano-indium-tin oxide10.1063/1.1783610 ↗
43. Effect of pressure on the atom positions in Se and Te10.1103/PhysRevB.16.4404 ↗
44. An X-ray crystallographic study of new monoclinic selenium allotrope δ-Se810.1515/MGMC.2007.30.5.231 ↗
45. Correlation between diffraction patterns and surface morphology to the model of oxygen diffusion into ITO films10.1016/j.matchemphys.2008.11.039 ↗
46. Effect of the oxygen absorption on properties of ITO layers10.1016/0042-207X(89)90095-X ↗
47. Physical properties of RF sputtered ITO thin films and annealing effect10.1088/0022-3727/39/1/027 ↗
48. Depth profiling of thin ITO films by grazing incidence X-ray diffraction10.1016/0040-6090(95)08117-8 ↗
49. Solid solubility of In2Se3 in some compounds of zinc blende structure10.1016/0022-5088(61)90060-1 ↗
50. Vacancy ordered structure of the III2VI3 compound semiconductor (GaxIn1− x) 2Se3 studied by electron diffraction and microscopy10.1080/01418619608242975 ↗
51. Texture manipulation of CuInSe2 thin films10.1016/S0040-6090(99)00778-6 ↗
52. Characterization of Cu (In, Ga) Se2 materials used in record performance solar cells10.1016/j.tsf.2005.11.097 ↗
53. Texture and electronic activity of grain boundaries in Cu (In, Ga) Se 2 thin films10.1007/s00339-005-3411-1 ↗
54. Preferred orientation control of Cu (In1-xGax) Se2 (x≈ 0.28) thin films and its influence on solar cell characteristics10.1143/JJAP.41.507 ↗
55. Monitoring the phase evolution of Cu (In, Ga) Se2 by different Se flux via in‐situ XRD10.1002/pssa.201532991 ↗
56. Texture development in polycrystalline thin films10.1016/0921-5107(95)03011-5 ↗
57. Effect of the Mo back contact microstructure on the preferred orientation of CIGS thin films
58. Molybdenum thin films with low resistivity and superior adhesion deposited by radio-frequency magnetron sputtering at elevated temperature10.1016/j.tsf.2014.07.043 ↗
59. Substrate influence on cu (in, ga) se2 film texture10.1016/j.tsf.2004.11.034 ↗
60. Performance of Cu (In, Ga) Se2 solar cells using nominally alkali free glass substrates with varying coefficient of thermal expansion10.1063/1.4819802 ↗
61. Numerical modeling of CIGS and CdTe solar cells: setting the baseline, in 3rd World Conference onPhotovoltaic Energy Conversion
62. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
63. A method of measuring specific resistivity and Hall effect of discs of arbitrary shape
64. On the role of non‐doped ZnO in CIGSe solar cells10.1002/pip.1185 ↗
65. Raman scattering analysis of electrodeposited Cu (In, Ga) Se2 solar cells: impact of ordered vacancy compounds on cell efficiency10.1063/1.4890970 ↗
66. Raman scattering in In2Se3 and InSe2 amorphous films10.1016/S0022-3093(99)00710-3 ↗
67. Amorphous effect on the advancing of wide-range absorption and structural-phase transition in γ-In2Se3 polycrystalline layers10.1038/srep04764 ↗
68. Electrical and structural properties of amorphous In-Se films prepared by flash evaporation10.1143/JJAP.24.1282 ↗
69. Raman spectra of In0. 30Se0. 70 amorphous films10.12693/APhysPolA.98.619 ↗
70. Quality and stability of compound indium sulphide as source material for buffer layers in Cu (In, Ga) Se2 solar cells10.1016/j.solmat.2008.09.015 ↗
71. Raman investigations of Cu (In, Ga) Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
72. Blue-photon modification of nonstandard diode barrier in CuInSe2 solar cells10.1016/S0927-0248(98)00035-X ↗
73. Shading-induced failure in thin-film photovoltaic modules: electrothermal simulation with nonuniformities10.1016/j.solener.2016.10.006 ↗
74. Progress in thin film CIGS photovoltaics–Research and development, manufacturing, and applications10.1002/pip.2811 ↗