Operational stability, low light performance, and long-lived transients in mixed-halide perovskite solar cells with a monolayer-based hole extraction layer
Source abstract
Abstract
Abstract Due to their tunable bandgap and low manufacturing cost, metal halide perovskite solar cells are attractive for ambient/indoor light-harvesting applications. In this work, we evaluate p-i-n perovskite solar cells fabricated with MeO-2PACz, a molecular monolayer hole extraction layer, as potential candidates for ambient light-harvesting applications. Two triple-cation mixed halide lead perovskite absorbers are compared, one with high bromide content (Br/I ratio 1:2, bandgap 1.72 eV, 16.1% power conversion efficiency) and one with low bromide content (Br/I ratio 1:11, bandgap 1.57 eV, 19.1% power conversion efficiency). Both materials demonstrated good stability while operating under simulated sunlight at the maximum power point for 100 h, a cumulative light dose comparable to over two years of ambient use. After 100 h operation, however, the measured device efficiency fell temporarily due to a transient loss of output current before returning to the nominal level after a long recovery period in the dark. These transient losses were more apparent in the wide bandgap device under strong light and were likely caused by light-induced halide segregation. After recovery, both devices retained good performance under a wide range of light intensities. Under a simulated ambient light source (835 lx white LED), the power conversion efficiency of the wide bandgap device reached 30.4%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. NREL Efficiency Chart, (n.d.).
2. Searching for “defect-tolerant” photovoltaic materials: combined theoretical and experimental screening10.1021/acs.chemmater.6b05496 ↗
3. High charge carrier mobilities and lifetimes in organolead trihalide perovskites10.1002/adma.201305172 ↗
4. Charge-carrier mobilities in metal halide perovskites: fundamental mechanisms and limits10.1021/acsenergylett.7b00276 ↗
5. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance10.1021/jz500279b ↗
6. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
7. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells10.1021/nl400349b ↗
8. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
9. Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors10.1038/s41560-018-0190-4 ↗
10. Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites
11. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
12. 40.1% record low-light solar-cell efficiency by holistic trap-passivation using micrometer-thick perovskite film
13. Perovskite PV-powered RFID: enabling low-cost self-powered IoT sensors10.1109/JSEN.2019.2939293 ↗
14. Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells10.1039/C6EE00030D ↗
15. Promises and challenges of perovskite solar cells10.1126/science.aam6323 ↗
16. How to make over 20% efficient perovskite solar cells in regular (n–i–p) and inverted (p–i–n) architectures10.1021/acs.chemmater.8b00136 ↗
17. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
18. Light and electrically induced phase segregation and its impact on the stability of quadruple cation high bandgap perovskite solar cells10.1021/acsami.7b06816 ↗
19. Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems10.1126/science.aaz5074 ↗
20. Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics10.1039/C4SC03141E ↗
21. Defect-assisted photoinduced halide segregation in mixed-halide perovskite thin films10.1021/acsenergylett.7b00282 ↗
22. Light-induced anion phase segregation in mixed halide perovskites10.1021/acsenergylett.7b01151 ↗
23. Light-induced phase segregation in halide-perovskite absorbers10.1021/acsenergylett.6b00495 ↗
24. Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction10.1126/science.abd4016 ↗
25. 18.4 % organic solar cells using a high ionization energy self-assembled monolayer as hole-extraction interlayer10.1002/cssc.202100707 ↗
26. NiOx-seeded self-assembled monolayers as highly hole-selective passivating contacts for efficient inverted perovskite solar cells10.1002/solr.202100663 ↗
27. Iodine-rich mixed composition perovskites optimised for tin(iv) oxide transport layers: the influence of halide ion ratio, annealing time, and ambient air aging on solar cell performance10.1039/C9TA02142F ↗
28. Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells10.1039/C9EE02268F ↗
29. High bending durability of efficient flexible perovskite solar cells using metal oxide electron transport layer10.1021/acs.jpcc.8b05008 ↗
30. A purified, solvent‐intercalated precursor complex for wide‐process‐window fabrication of efficient perovskite solar cells and modules10.1002/anie.201902235 ↗
31. How to make dense and flat perovskite layers for efficient solar cells: oriented, crystalline perovskite intermediates and their thermal conversion10.1246/bcsj.20190241 ↗
32. Measuring aging stability of perovskite solar cells10.1016/j.joule.2018.05.005 ↗
33. Perovskite–organic tandem solar cells with indium oxide interconnect10.1038/s41586-022-04455-0 ↗
34. Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells10.1038/s41566-022-00985-1 ↗
35. Efficiency potential of photovoltaic materials and devices unveiled by detailed-balance analysis10.1103/PhysRevApplied.7.044016 ↗
36. Rationalizing the light-induced phase separation of mixed halide organic-inorganic perovskites10.1038/s41467-017-00284-2 ↗
37. Visualizing phase segregation in mixed-halide perovskite single crystals10.1002/anie.201810193 ↗
38. Nanoscale chemical heterogeneity dominates the optoelectronic response of alloyed perovskite solar cells10.1038/s41565-021-01019-7 ↗
39. Intrinsic halide segregation at nanometer scale determines the high efficiency of mixed cation/mixed halide perovskite solar cells10.1021/jacs.6b10049 ↗
40. Structural origins of light-induced phase segregation in organic-inorganic halide perovskite photovoltaic materials10.1016/j.matt.2019.11.001 ↗
41. How interplay between photo and thermal activation dictates halide ion segregation in mixed halide perovskites10.1021/acsenergylett.9b02265 ↗
42. Stabilizing mixed halide lead perovskites against photoinduced phase segregation by A-site cation alloying10.1021/acsenergylett.0c02631 ↗
43. Light-induced lattice expansion leads to high-efficiency perovskite solar cells
44. Novel phenothiazine‐based self‐assembled monolayer as a hole selective contact for highly efficient and stable p‐i‐n perovskite solar cells
45. Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy10.1039/c0cp02249g ↗
46. Tailoring triple‐anion perovskite material for indoor light harvesting with restrained halide segregation and record high efficiency beyond 36